Jump to content

e7470 + Sierra 10.12.3 Installation issue


Recommended Posts

Hi dear all,

Im trying to install Sierra 10.12.3 to my e7470(core i7, 256 SSD, 8G Ram and bios 1.10.4 ver) laptop. By this guide i created boot USB with Generic EFI(v3949) and with E7x70_Sierra.zip bootpack.


Clover loading fine and i'm able to start installation, but when i starting installation with standard parameters(slide=0 dark=0 nv_disable=1 kext-dev-mod=1 -v) i'm getting following picture: post-105501-0-71115900-1487071766_thumb.jpg


Im really new in mac installation on PC, but i did everything by guide. Kindly ask your advise how to start this installation?

Link to comment
Share on other sites

Hi Jake,
DVMT has been set, but for double check i did it again, and finally i installed OS X.
For now according this guide i stuck on Post Installation section and trying to make "Generate own SMBios and SSDT" and duiring Execute ssdtPRGen.sh from terminal (Included in Tools attached belowstep i'm getting following: 
I downloaded newer version of that script 21.2 but when i'm putting generated SSDT.aml to /EFI/Clover/ACPI/Patched
i'm getting Kernel Panic.
Also for now LAN and WiFi is not working and even not presented in system report. 
There is any solution for WiFi and LAN? 
P.S. Clover what im using is last version as well.

Link to comment
Share on other sites

  • Administrators





If you download the complete zip archive and install it according to the published instructions, you'll be able to add your own CPU's specs to the database file. The database files are located in your home directory, under Library/ssdtPRGen:



The CPU characteristics database files are plain text and can therefore be edited with vi through Terminal or with TextEditor. Just gather your CPU's specs off the web (ARK Intel, cpu-world, etc.). The specs you need to inject are listed at the top of each file.

  • Like 1
Link to comment
Share on other sites

  • Create New...