SnakeEyes9922 Posted March 19, 2017 Author Share Posted March 19, 2017 UPDATE: Now that I have followed everyone's suggestions, now the machine is giving me an error: "Selected boot device failed. Press any key to reboot the system" The only idea I now have is to reinstall clover on the USB. Link to comment Share on other sites More sharing options...
zachg Posted March 19, 2017 Share Posted March 19, 2017 If I boot the USB from Legacy Boot rather than UEFI Boot (in the F12 Boot Options), that is the error I get. Link to comment Share on other sites More sharing options...
SnakeEyes9922 Posted March 19, 2017 Author Share Posted March 19, 2017 I only have one option and that is: "USB Storage Device" Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 19, 2017 Moderators Share Posted March 19, 2017 Do you have UEFI or Legacy enabled in the BIOS? The installation setting of Clover loader is different depending on which option you set on the BIOS. For UEFI, use this setting when install Clover loader: Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\OsxAptioFixDrv-64 For Legacy, use this settings: Install Clover in the ESP Bootloader/Install boot0af in MBR CloverEFI/CloverEFI 64-bits SATA Link to comment Share on other sites More sharing options...
SnakeEyes9922 Posted March 19, 2017 Author Share Posted March 19, 2017 The one main issue is that now I cant even get into the USB. Now I am getting an error that I stated in my previous post. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 19, 2017 Moderators Share Posted March 19, 2017 Is there another option under the UEFI boot menu? Usually you'll see the Legacy option on top and UEFI option on bottom if UEFI is enabled in BIOS but with Legacy Option ROMs enabled too. Link to comment Share on other sites More sharing options...
SnakeEyes9922 Posted March 19, 2017 Author Share Posted March 19, 2017 For the boot menu, there is only USB Storage Device. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted March 19, 2017 Administrators Share Posted March 19, 2017 what bios rev are you on. Link to comment Share on other sites More sharing options...
SnakeEyes9922 Posted March 21, 2017 Author Share Posted March 21, 2017 A15, the most up to date one. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted March 22, 2017 Administrators Share Posted March 22, 2017 you can try typing this in Clover's EFI Shell: the commands are as follows bcfg boot add 3 fs0:\EFI\BOOT\bootx64.efi “Clover†You must then type bcfg boot mv 3 0 This second bcfg command moves your new entry to the top of the boot list Link to comment Share on other sites More sharing options...
Recommended Posts