Jake Lo

Intel HD 4600 doesn't do it for you?

attach your Clover folder for review.

ethernet+graphics??? you're having graphics issue too? what do you mean by layout-id = 3 , 13 or 17 ? I mean, launch Config.plist with Clover Configurator. Under Devices/Audio, change inject value to 3. If you still have audio, change it to 13 and so on....

Clover auto detects and inject the correct FB, that's why it's working even without injecting ig-platform-id in the Config file.

@ChrisStocker Give this a try. Replace the DSDT.aml Move the 2 kexts from /E/C/kexts/Other VoodooI2C and VoodooI2CHID to /L/E Remove from /S/L/E AppleHPM AppleIntelLpssI2C AppleIntelLpssI2CController Repair permissions and rebuild cache Reboot DSDT-I2C.zip

@borgiatos Your files are for Nvidia card, not going to work for PaintArm, I think his system is running on HD 4600. @PaintArm Replace the attached contents into /EFI/Clover Remove VoodooHDA.kext and AppleHDADisabler.kext No need for the DP to HDMI converter. DP to DP is fine, you should be able to get audio through your DP connected monitor. You can upgrade directly from Sierra to High Sierra like a real Mac. No need to create new installer. High Sierra has new APFS format and will convert automatically if you have SSD drive. If you want to keep HFS+ format, see here for terminal command to install without converting (under Upgrading to High Sierra ...). Prior to upgrading, make sure to check if you have CoreStorage (virtual drive). Revert if you do before upgrading. See here under Core Storage for info 3020_HS.zip

Intel Wifi are not supported and will need to be replaced...try DW1560. For audio, use AppleALC.kext + Lilu.kext with layout-id = 3, 13 or 17. Ethernet, try RealtekRTL8111.kext All kexts could be found on the internet.

What kexts do you using for audio? I'm assuming VoodooHDA....does HDMI audio work? Post screenshot of Status with this app https://sourceforge.net/projects/dpcimanager/

Glad it's sorted out finally. Cheers!

I don't own 3020, but a 9020 and no problem running HS 10.13.5. Only issue is sleep is broken. Attach your current working Sierra pack (Clover folder) and I'll update it for you.

Remove AppleHDA_ALC292.kext from /L/E Restore a vanilla version of AppleHDA.kext to /S/L/E (you can find it in your installer or from another running OS X of the same version) I see you have some patched version of AppleHDA.kext showing in your kextcache log, not sure where that came from. Repair permission and rebuild cache.

Follow instructions from here to debug issue Yes, same Config but update the HDA patches

replace config and DSDT.aml. should fix the audio E7240_audio.zip

try resetting BIOS to Load Default, apply. Then change BIOS to UEFI AHCI XD CPU support enabled TPM disabled Make sure all USB ports are enabled

Hmm, not good to have duplicate kexts in 2 different locations. Remove the following from /L/E ACPIPoller.kext FakePCIID.kext FakePCIID_Intel_HD_Graphics.kext Shiki.kext Move from /L/E to /EFI/Clover/kexts/Other FakePCIID_Broadcom_WiFi.kext VoodooPS2ControllerR6.kext Remove from /S/L/E AppleHDADisabler.kext VoodooHDA.kext Remove ApplePS2Controller.kext from /EFI/Clover/kexts/Other Replace Config with the attached and repair permission and rebuild cache config.plist.zip

No need to start over. Run the following from terminal and then post the output sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

Ok, try replacing with this DSDT. Patched from your Origin folder Goes into /EFI/clover/ACPI/Patched DSDT.aml.zip

You didn't replace the ACPI folder as stated, but instead you probably merge the files. Not sure where you obtained all those SSDT-xx.aml You should have only these 3 *.aml in /EFI/Clover/ACPI/Patched DSDT.aml SSDT.aml SSDT-PNLF.aml

Do you have FakePCIID_XHCIMux.kext in /EFI/Clover/kexts/Other? Check /EFI/Clover/ACPI/Origin, make sure it's empty. Reboot to Clover GUI, hit F4 with the keyboard, Continue booting to OS X. Mount EFI partition. Compress and attach the Clover folder here. I'll review and patch the DSDT if necessary.

Follow instructions from here to debug issue By the way, you do have Legacy Option ROMs disabled correct? Make sure it is disabled if not.

According to the IOReg, you're not using the files I linked, unless you're only using it on the USB installer and not on the installed EFI partition. In that case, copy the Clover folder from the installer to the installed drive. You can of course just copy the DSDT.aml from my files to /EFI/Clover/ACPI/patched. That should fix the USB/Webcam issue.

Looks like you have mixed in E7470 and the alternative ACPI files. Here, replace the ACPI and the Config file to /EFI/Clover mefflecakes.zip

with the current BIOS, boot to Clover GUI. Hit F4 on the keyboard. Continue onto OS X. Compress and attach the Clover folder. I'll update and patch the DSDT/SSDT for you

No kext, webcam is USB based and the patched DSDT should have worked. Are you sure it has a webcam and it's working? Check BIOS if it's enabled? Post IOReg

Follow instructions from here to debug issue Does this model have Optimus option or HD 4000 only? DW1510 is wifi only, are you referring to the Intel bluetooth?