Jump to content
New membership by application only, through the "Contact Us" facility

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    871

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    Replace contents to /EFI/Clover, files are made for HS
  2. Jake Lo
    What bluetooth device does it have?
  3. Jake Lo
    what BIOS version are you running? Make sure you the following settings in BIOS: UEFI AHCI Legacy Option Roms Disabled Secure Boot Disabled Installing 10.13.4? Boot to Clover GUI, hit F4. Compress and attach the Origin folder in /EFI/Clover/ACPI I'll patch the files for you
  4. Jake Lo
    It requires an Encryption Key to download. Why you don't use the attachment option from this forum? Look at the FAQ for info how to attach.
  5. Jake Lo
    You are not using the patch correctly or not copying the string correctly, either way you have an extra bracket that's causing the error. Remove it and you're set.
  6. Jake Lo
    Your DSDT.dsl has an extra "}" After you remove that, you'll just need to rename *pnp0c14 to PNP0c14 After that you should be able to compile and save it as *.aml file. You can't boot with *.dsl file
  7. Jake Lo
    Were you using another Config.plist before? like config 20180527.plist? HDMI for 1600x900 was enabled in that Config...
  8. Jake Lo
    Disable Legacy Option ROMs. That should be enough along with the other settings you had mentioned.
  9. Jake Lo
    @peluko HDMI was disabled for 1600x900. Replace with this Config. config.plist.zip
  10. Jake Lo
    what's the display resolution? You can check it in the BIOS
  11. Jake Lo
    Hmm, strange you and @Liem Vo both have the same system but according to Liem Vo, his is Synaptics and does not have multi touch, not even 2 fingers scrolling. I checked both your IOReg and his, they both show the same devices under TPD1...pondering...
  12. Jake Lo
    Does touchpad show in Preference where you can adjust settings? Can you attach an IOReg? Want to determine if it has an Alps, Synaptics or Precision touchpad.
  13. Jake Lo
    Probably but will be blurry.
  14. Jake Lo
    Post your before and after DSDT.aml Don't know what error you're referring to. Warnings can be ignored.
  15. Jake Lo
    Known issue already from my E7470 guide Known Issue & Workaround: HDMI-Output works but if connect HDMI-Cable the local Display goes off and never appears. I had tried different configurations but none panned out. Here's a workaround: Close the LID until you see the HDMI display becomes the primary display, then open the LID. It'll switch LCD as primary and projector as secondary.
  16. Jake Lo
    here, try this, replace contents into /EFI/Clover 7470_jfrank58.zip
  17. Jake Lo
    Fn+F8 for toggling display is for Windows only, not for Mac. Try repair permission and rebuild cache. If still not working, then post debug Follow instructions from here to debug issue
  18. Jake Lo
    Does 2 finger scrolling work? other gestures???
  19. Jake Lo
    there's a change in the new Clover for HDA injection. Changed from string to integer. Use this config config.plist.zip
  20. Jake Lo
    If you're talking about the KP issue, try upgrading to the latest Clover v4497 as of today. The other 2 issue, I don't have an answer.
  21. Jake Lo
    @catmater Do this: Remove AppleIntelLpssI2C.kext & AppleIntelLpssI2CController.kext from /S/L/E Install the 2 attached kexts to /L/E or /S/L/E Replace the DSDT.aml Repair permission and rebuild cache Reboot Catmater_I2C.zip
  22. Jake Lo
    what audio fix -Apple_HDA_293Fix? You have both AppleALC.kext and Apple_HDA_293.kext. In DSDT you have layout-id set to 1 for Apple_HDA_293.kext but I don't see AppleHDA hot patches in the Config, so audio shouldn't work. In Config.plist I see you have layout-id set to 11 which is for AppleALC.kext, so Apple_HDA_293.kext is not needed. As for as I can tell, they both are the same but with different layout-id.
  23. Jake Lo
    with the updated files, check for FixHeaders at Clover boot Options and try again. If still fails, then try booting to Clover GUI, hit F4. Now compress and attach the Clover folder here. Will need to patch your personal files for you
  24. Jake Lo
    You probably didn't read the 1st page... NVS is not supported in High Sierra therefore disabled via DSDT. As a result all external video connections are disabled since it's hardwired to the NVS. If you want to use the HDMI/DP port, you'll need to go with NVS which is supported below High Sierra.
  25. Jake Lo
    The Origin folder shows me that you're using the wrong set of DSDT/SSDT Replace this contents into /EFI/Clover and try again
×
×
  • Create New...