RobertB

I have been succesfull installing OSx on variouse PC's and laptops. Now I have a Packard Bell EasyNote TJ75-GM-520 of a friend I like to install OSx on. With Mthack I have made the installation USB no problem. At start it al seems to go right Boot with -v -f But the system seems to get stuck on just after the AirPort_AtherosNewma40: Ethernet address xx:yy:xx:yy:xx:yy IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notinfication (this is the last line) Does one of you know what I can do to solve this? machine spec's: CPU: Intel Core i3 330M chipset: INtel HM55 GPU : INtel GMA 500 WLAN: Atheros AR5B93 I hope one of you can provide me with some feedback. Robert.

In system profile under software/extensions I see that the AppleIntelE1000e is loaded but with version 1111 of 23/1113 00:42 YES Not Signed. Could it bee that the system does load a wrong version from a other position? Is it the right version 1111 <> 2.5.4d? thanks, In the System/Library/Extensions folder I do not see this kext

This is what the terminal command gives me: 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) 00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [NVS 3100M] [10de:0a6c] (rev a2) 01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1) 03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) 04:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 03) 04:00.4 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller [1180:e832] (rev 03) 3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02) 3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) 3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02) 3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02) 3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02) 3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02) That tis the one I have in my extra/extension folder version 2.5.4d

How can I find out what Lan card is in the system?

I will do that now but it has been the Kext from the installation

I have a Dell E6410 running for some time now and from the beginning I have a issue with the LAN. When I start the system LAn works just fine. But when I'm transferring files from the Dell to my Mac Mini every now and then the transfer stops and also getting stuff from the WEB is not possible any more. The LAn settings still seem to be the same. The only option I have found is to restart the DELL and then the LAN works again. Does any of you had this problem before and knows how to solve it? I'm at 10.9.2 thanks,

I have mine D630 up and running again after a video breakdown. Mine is running with Bios A17 but I see that some of you are running with Bios A18! On the Dell site I see that A17 is the last version. Where to download the A18 version and what are the advantages over the A17? thanks,

I have found the product but can you please explain what this would do? As mentioned I have had mine mobo in the oven twice before and that did the trick. I did not use any no clean liquid flux. Would the no clean liquid flux help the with better re-flowing? Also to keep the system control the temperature better would a additional fan control app in OSX help. I would be able to set a higher lower fan speed so that the system would bet a better cooling also at the lower fan speed as this would be higher that what it is at this moment. It could also have the option of setting the max fan speed at a lower high temp. so the system will start cooling harder even at a lower temperature. Does one of you have experiences with that? thanks,

Thanks for the replay. Can you elaborate a bit more on the "no clean liquid re-flow flux? So fare I have re-backed mine in the oven at 200C for 8 minutes.

Thanks for the replay. For sure this would help but I'm wondering if others have the same problem with the Nvidea chip breaking down due to heat. Are they running the D630 systems 4 to 5 hours a day? how come that mine keeps breaking down. Is their a setting that would increase the fan speed to keep the system running at a lower temp?

What have you done to keep the temperture of the GPU under control?

I have two Dell D630 systems both with the Nvideau video chip. The first system I had twice in the oven to reflow to get the video working again. The system is out of order due to the heat of the video for some time now. Did not do the reflow for the third time. The second system has the same problem now as well. Video stopped and I have to reflow it to get it working again. When I do the reflow it will work for a nother 3 to 6 months but what can I do to kool the video processor better to keep the system running for 2 years or so? Does one of you has a good tip that does work for you? I love the Dell D630 but when it keeps breaking down on me it is not the right way. thanks,

All, I have one new issue. When connected to my network by cable the connection with the network gets lost every now and then. I have the DHCP setting to auto and all is filled out correctly only a reboot of the E6410 will get my ether net back. I loss connection to other Mac's in the home network as well connection to the Internet. Does one of you seen a similar problem and was able to fix it? thanks,

Thanks Hervé, It works like a charm I now have the readings in my iStat Menus.

Perfect works like a charm. I believe now only one thing is left and that is sleep When we could have a solution for that it is 100%. thanks,

I have my E6410 up and running with Mavericks and it works just fine. My last Hack I had to back 3 times in the oven as the Nvidea GPU would un-flow it self. I do not like this to happen to my E6410 so I installed iState menus to show me the various readings. Only on the temperature side it only shows the hard disk temp. No CPU, non Mem, no GPU. Does one of you know a good tool that would display more then only the hard disk temp. I assume the I5 and the Nvidea 3100 both have temp sensors on board. thanks,

Great. SD card reader is working and soon shutdown will do the same. Now I only have to find a kext for the 1520 Wifi card.

Pablo, I have done whet you wrote but had some issues. The system will only boot when I boot it with -f. Then shutdown functions, sleep looks to work but the power button stays ON and the van keeps on running and keeps blowing warm air even after 3 to 4 minutes. I took out the lines in the plist file kept the aml file in the Extra folder and the system had to be started with -f. What could be the case of this? thanks,

All, Does one of you has Shutdown working already . Reboot does work. At shutdown the screen does black but the power LED and BT LED stay on. Only pressing the power button for 5 to 7 seconds does really shuts down the laptop. Is their something I can test for one of you that has experience with this kind of issues?

I ussed the following link to get my Dlink DWA-121 working under Mavericks. http://www.insanelymac.com/forum/topic/286960-realtek-wireless-network-utility-crashing/?p=1895759 I have a Dlink DWA-121 and with the driver pack of IOS 10.7 it works like a charm. Wlan_11n_USB_MacOS10.7_Driver_v1021_UI_1.9.7.zip

Thanks for the feedback but for what I can see my BT is still working after the update. When I see a problem I will come back to this. thanks,

How do I know what IOBluetoothFamily Plugin I need? BT is now working on 10.8.4. should I copy this pluin out before the update and then re-install it? thanks

I have my Latitude D630 with Nvidea up and running at 10.8.4. perfectly. Now we have the update to 10.8.5. Can I run the update as always or is their more to it this time? thanks,

Yes I downloaded the last version of EDP and it worked like charm

All thanks for the input. After 10 attempts I have put my Carbon Copy of the 10.5.8. back to the system. I only had kernel panics and could not find a half descent installation guide. 10.5.8. runs rock solid so I will stick to that.