-
Posts
163 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by girardpallet
-
-
bootlog if necessary
-
-
Thanks for your reply,
Which bios version ?A16
Specific other settings changed in Bios instead of Bios Defaults -> SATA to AHCI and enable Legacy Mode too ? boot list option to UEFI
What do you use on mSata OSX or windows ?both
What do you use on SATA OSX or windows ?backup of el capitan
Can you share your /S/L/Caches/com.apple.kext.caches content ?print screen attached
Can you share your clover config?attached
Can you share your EFI folder ?to big file
Which kexts did you added to L/E? LE print screen attached
Which kexts did you added to S / L / E ?6 print screen attached
Thank you !
hope this will help
-
My E7440 is working fine with dual boot in UEFI.
I didn't understand what you need , but if I can help...
I will do !- 1
-
Yes, no issue upgrading. Make sure you have latest Clover installed v3330 prior.
Thank Jake Lo, i have done without trouble!
-
Hello The team,
someone have already installed 10.11.3 from 10.11.2 ??
thank for your feedback.
-
I install new EL Captail, but only working after start Window before start OSX. If start OSX and shutdown OSX, turn on OSX, BT not working. I try edit config Clover config.plist and re install Kext ver 2.5-> 2.8.7.
Thanks so much
Hi ,
same trouble than you: working after reboot for win8, but not if booing directly to Capitan !
did you fix it ??
thank
-
JakeLo,
i'm a realy stupid man...! :
in post @482 i have read "rename" and not "replace".......and now i'm not able to restart, same allocating error, also if i try to start from a other disk...
i'm able to start on 10.10.5 from a older version of clover, but impossible to mount the EFI partition to change back the name.
i'm stuck with a dead system....
did someone have a idea how to solve this without reinstall.... i don't want to lose my working partition.
for information, in my laptop , i have 2 HDD, one is 1Tera ssd, with a backup of a working 10.10.5, and a backup of EFI.
the other HDD is 256 Giga ssd, with WIN8, osx 10.10.5 , and EFI partition.
only Win8 is able to start....
thank for hep a stupid man !
-
Bording to the plane now ... Will test during the flight!
-
Tank JakeLo,but where ?
-
El capitan update won't start....
10.10.5 is running well, clover is updated to 3270, and clover configurator is 4.24.0.
i have follow the step provided and updated by JakeLo in post #463, but no luck, installation will not start.
attached is picture of the message in verbose mode.
i have try in safe mode, but exactly same.
i really need help .
thank
the 10.10.5 is still booting correctly with the new and attached config.plist
-
did you have a small tuto for update from 10.10.5 to el Capitan ?
what i have try without success :
- copy text on EFI from kext / 10.10 to 10.11
- add this as #463
<key>RtVariables</key>
<dict>
<key>BooterConfig</key>
<string>0x28</string>
<key>CsrActiveConfig</key>
<string>0x67</string>
</dict>
-download el capitan installer from Appstore,
launch the installer
reboot
is it correct ? because installation will not start...
any help is welcome... thank
-
did you add your kexts into your efi clover kexts 10.11 folder? also clover configurator version 4.24.0 has provisions for the CSR values under RT config
Hi,
should we just copy and paste from 10.10 folder to 10.11 folder ?
thank
-
-
-
Hi,
on 10.10.3 working perfectly, i delete this 3 files "AppleSDXC, AppleIntelHD5000Graphics & AppleIntelFramebufferAzul ",
after i update to 10.10.4, and install with kext wizard FakePCIID_HD4600_HD4400 and FakePCIID you send me. I repare permission and cache, reboot .......
but still same , the graphic is not so good as on 10.10.3! still opening the windows step by step and the mouse is not moving smoothly .
thank for suggestions
-
If i update to 10.10.4, did this 3 files will be updated to the vanilla version?Which version do you need? 10.10.4?
It's always a good idea to backup before patching.
You could get them from the installer. Once restore to vanilla, reinstall the FakePCIID fix.
Thanks
-
i will continue to 10.10.3 for the moment to test with the vanilla files and FakePCIID fix, before to go to 10.10.4 !
if you can send me a backup of this 3 files, will be nice .
-
after removing from S/L/E the 2 files from HD4400_4600_Fix-6, graphics is coming back to good !
can you send me this 3 files "AppleSDXC, AppleIntelHD5000Graphics & AppleIntelFramebufferAzul " please
i will try again tomorrow , it is time to sleep here in France.
anyway, thanks -
Jake Lo, do i need to do this on 10.10.3 or after update to 10.10.4 ??
i've try in 10.10.3, but the graphic is not bad as ti is in 10.10.4, but still some "open step by step" fir example if i click on Application icon or download icon on the dock !
here is the link to zip of my S/L/E (will be available in 1 hour.....download time)
https://dl.dropboxusercontent.com/u/70549634/Extensions.zip
thanks again for your support -
thank, attached my config file, dsdt, and a print screen of the kext used on 10.10.3.
i can send you some kext if needed.
thank for your help.
if you need something else to help me , please let me know. -
Hi Jake Lo,
I'm with clover configuration. after updating, graphic didn't work correctly....
mouse is very slow, moving step by step...also the screen refresh is step by step....?????
any help is welcome ! thanks -
Hello,
did someone try to update to 10.10.4 ?
-
Try this if you don't have fakePCIID install
# Patch libCLVMIGILPlugin for HD4400 OpenCL / OpenGL sudo perl -i.bak -pe 's|([\xFF\xFC\x3D])\x86\x80\x12\x04|$1\x86\x80\x16\x0A|sg' /System/Library/Frameworks/OpenCL.framework/Libraries/libCLVMIGILPlugin.dylib sudo codesign -f -s - /System/Library/Frameworks/OpenCL.framework/Libraries/libCLVMIGILPlugin.dylib
Thank Jake Lo,
i've try to run your commands in the terminal, no error message, but it didn't solve the log out trouble .
[Guide] E7440 with Clover
in The Archive
Posted
EFI folder: https://www.dropbox.com/s/voougyhe3yjrn3a/EFI.zip?dl=0
excludedkextalert.plist.txt
DSDT.aml.txt