Jump to content

Clemaister

Members
  • Posts

    6
  • Joined

  • Last visited

Contact Methods

  • Skype
    Clemaister
  • Twitter
    Clemaister

Clemaister's Achievements

Private

Private (2/17)

0

Reputation

  1. Yes I did and it didn't change anything. :/ Should I restore the original IOPCIFamily.kext too in order to get back to the error I had first ?
  2. First of all thanks for your reply. Yes, it is a myHack install disk. I'm just following some threads of forums with people having the same problem than me. Also I was replacing kexts in S/L/E because it worked for the IOPCIFamily.kext, whereas it wasn't solving anything when placing it in the E/E. I said that DSMOS was an error because the installation hangs there, sorry about that. According to your advice I will begin first with removing the FakeSMC of S/L/E, and restoring AppleACPIPlatform kext.
  3. Hi everyone, I'm trying to install Mac OSX Mavericks on an ACER Aspire 5920G laptop (Intel Core 2 Duo T5450, Graphics by NVIDIA GeForce 8600m GT). The first time I was attempting a boot in verbose mode, I got the "Configuration end, bridge x device 19" error. As the boot flags "npci=0x2000" and "npci=0x3000" weren't effective, I added IOPCIFamily.kext and AppleAPCIPlatform.kext in the Extra folder, which made the installation hang at "Configuration Begin". So I made a copy of IOPCIFamily.kext in the S/L/E folder, which corrected the error but gave me the "DSMOS has arrived" error. Now I tried to replace FakeSMC.kext with a new one, and I copied it into the S/L/E folder. I also deleted all graphic kext : AppleIntelHD*.kext, AppleIntelSNB*.kext, AMDRadeon*.kext, ATI*.kext, GeForce*.kext and NVDA*.kext, which didn't change anything. Of course I tried to boot with the "GraphicsEnabler=No" and the "-x" boot flags. One more thing, before the "DSMOS has arrived" line shows up, I noticed the following errors : "BootCacheControl: Unable to open /var/db/BootCache.playlist : 2 No such file or directory", "SuperIODevice : [Fatal] found unsupported ship ITE sequence ID=0xfc11, Winbond sequence ID=0xffff" Any idea on how to fix it ? Thanks for your time.
  4. Hi guys, I finally installed Mavericks on my HP Pavillon Dm1-4136sf (with AMD E450 processor) When I start my pc with no bootflags, it will loop reboot. If I type the bootflags PCIRootUID=1, PCIRootUID=0 or -legacy, it displays the apple logo screen (with no spinning wheel). If I do the same thing in verbose mode, it displays text lines at high speed, and then the screen go black. Of I course I tried other combination of boot flags. I already had this problem when trying to install Mavericks, and I solved it by modifying the mach_kernel. (Check this post for more info : https://osxlatitude.com/index.php?/topic/6330-stuck-at-apple-logo-no-spinning-wheel/) I was wondering if the mach_kernel used to boot Mavericks is the same than the one which was used for the installation boot. If it is the case how could I do to make it boot ? And if it is not how could I do to install this mach_kernel in the main hard drive ? Thank you for your time.
×
×
  • Create New...