Search the Community
Showing results for tags 'amd'.
-
Hello all, My laptop is listed above. I got this laptop around 2013 and it's an AMD processor. I managed to install OS X Mavericks using the Niresh method, and managed to get Ethernet working. But I was wondering if there was a way to make my graphics work, and other functions like battery life, display brightness, sound, wifi, etc. If someone can help me through this it would be greatly appreciated.
-
Hello, I am here to show my progress with the Lenovo G505s + OS X Mavericks (using 10.9) Hardware: AMD A10-5750M APU w/ Radeon HD 8650G Integrated Graphics (Richland Series) Qualcomm Atheros QCA8172 Fast Ethernet Qualcomm Atheros AR9565 (WiFi + BT Combo) - Half Mini PCIe 6GB Memory ELAN Touchpad Lenovo EasyCamera QE/CI: Not working (hopefully in Yosemite). Sound: Working - using latest VoodooHDA (2.8.6 or higher). Included in EDP repo. Trackpad: Working - using EMlyDinEsH's ELAN Touchpad Driver. Included in EDP repo. USB 3.0 - Working - Using Generic Driver. Included in EDP repo. WiFi & Bluetooth - Not working. VGA - Not working. HDMI - Not working. Sleep - Untested. Battery - Working using VoodooBattery. Included in EDP repo. Camera - Working. Card Reader - Not working. Thank you!
-
Hi This is my notebook: http://www.asus.com/Notebooks_Ultrabooks/N56DP/specifications/ Asus N56DP A10 4600M 2.3Ghz 4GB Ram AMD Radeon HD 7730M & AMD Radeon HD 7660G 500GB HDD USB 3.0 And a installed windows 7 on it. I used myHack 3.3.1 and Mountain Lion 10.8.3 and made a bootable USB. Every thing is ok and i can see installation with GraphicsEnabler=No flag. I want to install OS X on a partition, without losing any data and without format whole Hard Disk and without installing windows 7 again. Now, i format a partition to HFS+ type. What should i do now?
-
Hi all I have a problem with Mac os x 10.6.2 by Hazard (support AMD) on my Eee Pc 1015BX (amd C-50 and 1gb ram.... too slow for new windows).... I have successfully installed with following bootflags: cpus=1 busratio=18 maxmem=1024 arch=i386 -v -f -x (I don't need graphics resolution change because Eee pc is small laptop and minimal resolution fit perfectly) But I stuck when I am normaly booting :-/ and I have tried same bootflags and some others like -s or GraphicsEnabler=No.... Every time I get stuck in same screen :-/ Every time I see this: Panic (cpu 0 caller 0x2a76e6) "version mis-match between Kernel and CPU PM"@.....and some long text..... Then I have there: Kernel Extensions in backtrace (with dependencies): Sk.triaxis.kext.SleepEnabler(1.0.1)@0x1786f000->0x17870fff BSD process name corresponding to current thread: Unknown Mac OS version: Not yet set kernel version: Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-145.1.25~1/RELEASE_I386 system model name: MacPro2,1 (this is Fake ) System uptime in nanoseconds: 1814168 And then.... boot stuck.... for eternity :-/ I don't know what to do :-/
-
Hello, I am still researching on how to get my integrated AMD Radeon 8650G working on my Hackintosh. I haven't seen much for cards closely related to mine. So, I wanted to ask, does anyone have a fully working graphics card from the Richland (Radeon HD 8xxxD, 8xxxG) in OS X? Thanks. Edit: I have decided to make this post dedicated to progress concerning full Radeon HD 8650G (Richland) support in Yosemite.
-
Hello! My Lenovo Hackintosh has its fan almost always running, overheating sometimes. I have to manually fan it to keep it from overheating, though that doesn't help much. I turn on the A/C, fan the computer, and it still overheats. This also happens when trying to install the Mavericks 1.9.1 update. It tells me "3 minutes remaining" under a progress bar and "Software Update". Then the fan accelerates and the computer shuts down immediately This is not the situation in Linux/Windows/Unix. What can I do to get the fan to run normally/keep this thing from overheating? Thanks!
-
Hello, As you may have guessed, my integrated graphics (AMD Radeon HD 8650G) in my A10-5750M Richland Series APU is not working. Can someone tell me some methods I could try to get it working? In Chameleon Wizard, I see a list of names like Duckweed under "ATI Config". What are these?
-
Hi everyone ! I have a strange problem. I've just installed 10.9 on my AMD Athlon 64 x2 2.0 Ghz 2 GB DDR2 RAM. I have 2 SATA drives, one of 80 GB for OS X and another one of 500 GB for Windows 8.1 / Data. Everythings works fine but for an unknown reason, sometimes the second 500 GB drive suddendly disappear from my desktop saying Ejecting Error, try to disconnect the drive by…etc, just as if it was an USB external drive. System Profiler detects it as a SATA drive, the icons aren't yellow, there's just like any normal drive and most of time, I can read/write on them without problems. I did a Time Machine backup without issues. First I thought that it was a Kext conflict between SuperVIAATA.kext and IOAHCIBlockStorageInjector.kext or AHCI_3rdPartySata.kext but I tried to remove the two last of them and be able to boot fine (Removing SuperVIAATA.kext result as "still waiting for root device"). But the problem persist and I can't figure why ! The drive works fine on Windows and shows no errors, SMART state is reported as capable and OK and the 80 GB hosting OS X works fine as well. My desktop is a HP dc5750 with the latest BIOS (configure in Native IDE mode - no AHCI available) and beside this very anoying problem under OS X, it works fine. Any ideas ?
-
I was try install by that video Have a Just waiting for root pci installation not continue need in detailed support Now using notebook lenovo z570 with 10.9.2
-
Hi guys, I finally installed Mavericks on my HP Pavillon Dm1-4136sf (with AMD E450 processor) When I start my pc with no bootflags, it will loop reboot. If I type the bootflags PCIRootUID=1, PCIRootUID=0 or -legacy, it displays the apple logo screen (with no spinning wheel). If I do the same thing in verbose mode, it displays text lines at high speed, and then the screen go black. Of I course I tried other combination of boot flags. I already had this problem when trying to install Mavericks, and I solved it by modifying the mach_kernel. (Check this post for more info : https://osxlatitude.com/index.php?/topic/6330-stuck-at-apple-logo-no-spinning-wheel/) I was wondering if the mach_kernel used to boot Mavericks is the same than the one which was used for the installation boot. If it is the case how could I do to make it boot ? And if it is not how could I do to install this mach_kernel in the main hard drive ? Thank you for your time.
-
I have ML 10.8.2 on my AMD laptop. Specification AMD Phenom II n830 Triple core 2 GB DDR3 Ram Ati Radeon 5470M 512 MB The problem is sound, UI, and videos have lag. But if i move mouse no lag. I have tried voodootscsyncamd.kext but i doesn't work(the kest is loaded) So what should i do? Thanks
-
Hello people! Goodday from Australia, I am pretty new in this forum however I am trying to switch my HP xw9400 to a AMD-based hackintosh, does anyone have any idea? I have done quite a bit of research and I dont seem to find a solution better than writing in a forum. Specs are as below: 2x AMD Dual Core Processor 2220SE 2.8GHz 16GB RAM PC2-5300 667MHz 3x SSD 146GB HDD HP 0A1Ch Motherboard Nvidia nforce pro 3600 Chipset and Southbridge 2x Nvidia Quadro FX4500 512MB Any help please? Cheers Khen