arcaman6

Thanks Jake. Did not work exactly as described but it did get me to a solution by adding a boot option. The one you suggested did not work but \EFI\BOOT\BOOTX64.EFI did and gets me the clover menu. Pic attached in case anyone needs to see how to do it. Once again many thanks for the excellent support Cheers Aubrey

Hi I have had a working Dell Optiplex 7020 which was triple booting (Ubuntu, Catalina and Windows 10) using Clover without any issues. However the Windows 10 became corrupt and had to be reinstalled. After reinstall on start-up the computer goes straight into booting Windows 10 and I do not see any Clover boot options. I have the original install USB for Catalina and I can boot any operating system form there with no issues so each of the operating systems is good. I have reinstalled Clover (v5118 I think) after booting Catalina but this made no difference to booting without USB - straight into Windows 10. I guessing that the reinstall of Windows 10 has overwritten something which enables Clover to work but unsure how to fix it. I tried deleting bootmgfw.efi from EFI/Microsoft/Boot but Windows Boot Manager says there are no useable boot devices. I tried substituting EFI/BOOT/BOOT64.efi for EFI/Microsoft/Boot/bootmgfw.efi which allows Clover to display the boot options but selecting Windows 10 just hangs with flashing cursor. So how to proceed? Do I just have to do a clean install of Catalina to fix it? Cheers and thanks for your help. Aubrey

Now works 100%. Hadn't noticed the Microsoft folder in the original E6540 bootpack. As always many thanks for the excellent help. Aubrey

Hi Guys I have a Dell Optiplex 7020 which I have installed macOS Catalina, Windows 10 and Ubuntu Linux. I started with an Catalina install USB from my Dell E6540 simply because it was already there and the installation actually went pretty smoothly and was able to boot all three OSs. However as the Catalina install was using the wrong bootpack it didn't work that well with screen resolution issues and no sound - which was to be expected. I rebuilt a proper bootpack using the 9020 Catalina bootpack and copied it to the EFI partition and it works perfectly - QECI and audio etc.. Very happy with it. However now unable to boot from Windows 10. Using 9020 bootpack Clover offers three options - macOS, Linux and shows windows logo but says boot <blank> from <blank> underneath. If I select this option disk momentarily blinks and terminal type cursor shows at top of screen but stops there. Reverting back to the original E6540 (sub-optimal) bootpack restores the ability to boot Windows 10 (so the installation is still bootable) but obviously Catalina is not working 100%. I thinking it's an issue with config.plist but unsure how to proceed. I've attached both bootpacks FYI. Any help much appreciated. EFI_e6540_2_9020.zip An the original E6420 bootpack EFI_E6540.zip

Hi Jake. The EFI posted wasn't actually the one I was using - have a load of different ones on my desktop and uploaded the wrong one. At your suggestion I tried out the install USB from my E6530 which actually booted up OK after I had checked the BIOS settings. On trying the same sequence with the E6540 install usb it also booted up fine and I completed the installation of Catalina. So it looks like I actually have a weird hardware problem on my laptop - boots Clover fine but only after a restart (exiting BIOS settings causes a restart rather than a cold start). Catalina works just fine but I did have to use AppleIntelE1000e.kext to get the onboard Ethernet to work - intelmausi.kext didn't seem to work with my hardware. Is this a good way to do it? Planning the use a Broadcom BCM94360HMB card for WIFI as no kexts required for it. Thank's for all your help - installer was working all the time. Back to fine tuning my E6530 now. Cheers Aubrey

Thanks for that. Added new config.plist but still hangs on boot up. CLOVER_E6540_Catalina_new_config.zip

Hi Jake. Removed SSDT.aml but didn't make any difference - still hangs in the same place. I built it on my E6530 but for i5-4310M processor - so would it be good for my E6540 as it has the i5-4310M or it that a big assumption? found this code in SSDT.aml: custom mode...........: 0 host processor........: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz target processor......: i5-4310M number of processors..: 1 baseFrequency.........: 800 frequency.............: 2700 Looks like I'm out of luck with this install. As a final task I think I'll try and reprogram the BIOS chips to the latest version. Not hopeful but it's worth a try. Many thanks for all your help. Cheers Aubrey

The display is a disaster area for sure but it's temporary. The machine came with a FHD display and I thought it was an added complication to install Catalina with it installed.So I have installed a scrap screen from my spares box for the meantime - but it's not pretty. The installer is vanilla built as outlined in the many excellent guides on the site. OS I think is 10.15.6 and Clover is v5118. Reset BIOS and set as suggested. Even started with F12 to make sure it was doing a UEFI boot. The version is A17 - unable to update to latest (goes through the motions but doesn't actually do the update when laptop restarts) - but I think it is unlikely that's an issue as A17 fairly recent). The laptop has an AMD GPU but looks like that is disabled in the bootpack. Are you happy that the bootpack is set up correctly? Any idea what I could try next? Cheers Aubrey

Many thanks Jake. Did as suggested and my boot gets a lot further but not all the way. I've attached my bootpack and a pic of where the boot halted. Any ideas of what to try. EFI_e6540_test.zip

Hi Guys Previously installed Catalina on E6530 and works great but now need to install on E6540 for a mate. I started with this thread as it seemed to have all to have an EFI close to my actual laptop but unfortunately unable to get the installer to boot. I have attached my Clover folder. Clover boots for a bit and then hangs - no panic. Could someone have a look at the files or even suggest a better starting point for my build. Cheers. Specification of machine E6540 i5-4310M 6MB 480GB SSD Bios A17 (unable to get it to update to a later version but working on it). CLOVER_E6540_Catalina.zip

So decided to add the bios revision to the post only to find the bios was A07. Updated to A21 and both issues actually solved. Next job is to update the screen to Full HD 1080p.

Hi. Been installing Catalina on a Dell Latitude E6530 using the excellent guide but have run into some issues. The install USB stick will display the apple logo and timer line on the laptop LVDS LCD screen until it gets about 2/3 across (looks like when it loads the display drivers) and then LCD screen goes black - although found that if you plug in a HDMI screen it boots to the end using the external screen. I went ahead and installed Catalina which went very smoothly but even when booting from main HDD LCD display will go blank during boot up but boot up completes on the HDMI screen. Able to use Catalina normally on the external screen. Trying without HDMI screen results blank display but Catalina seems to complete booting OK but you can't see anything. Second issue is to do with sleep. If I put Catalina to sleep (power LED is breathing as expected) and hit the power button for wakeup the laptop boots from scratch running Clover boot and loading Catalina from scratch. Laptop boots High Sierra without any issues. It has 8GB RAM and i5 processor, currently mechanical HDD (will be replaced with SSD) and external monitor is 1440x900. No Nvidia GPU. I've attached the debug folder so I think it has all the information you might need. Guide written for E6230 so may have some differences with E6530. debug_19667.zip

Cheers. That did the trick so everything working 100%. Thanks so much for your help.

Thanks for the reply. I have rebuilt it countless time but the result is the same. Here is the output from the rebuild:- sudo ./permission.sh Password: rebuilding //System/Library/PrelinkedKernels/prelinkedkernel kext file:///Library/Extensions/DisableTurboBoostBattery.kext/ is in hash exception list, allowing to load Kext with invalid signatured (-67062) allowed: <OSKext 0x7fba2884aaa0 [0x7fff8e37eaf0]> { URL = "CodecCommander.kext/ -- file:///Library/Extensions/", ID = "org.tw.CodecCommander" } KernelCache ID: 79467EA040F45B7C043B1554575197F2 kextcache updated critical boot files, requesting launchd reboot Finished Every time I repeat I get the same output. There is a lot of repeated information in the log so here is a relevant snippet attached. I'm not familiar with this log so not sure if this says its working properly or not. Cheers. codeccommanderlog.txt.zip

I was hoping someone could help me with an issue on an E5540 regarding loss of audio after sleep. The E5540 is running High Sierra and was installed using this guide and installation went fairly smoothly. I used the E7440_HS.zip bootpack as the E5540 does not have Nvidia (tried to rework for no Nvidia but was not able to get it working). Everything worked except SD card but fixed config and now works fine. However I don't have audio after waking from sleep - works fine (speaker and earphone) when first booted. After sleep no audio on speaker unless you plug/unplug earphones which seems to restart it - but never anything on the earphones themselves after wake. I've checked bootpack kexts and seems to be OK (CodecCommander) and not sure what to do next. Machine has i5-4200U cpu, HD4400 gpu, ALC 3226 audio controller. Cheers and thanks in advance for your help. debug_18128.zip

More progress today. The DSDT-E6230-HD4000 allows me to boot up in 1080p and the USB ports and SD card reader all work fine. However external HDMI port is still not working. Have tried Enoch options IntelCapriFB=4 and DualLink=1 individually and together with no difference. After a little rooting around I discovered there are patches for AppleIntelFramebuffer.kext here and I applied these, reinstalled kext in SLE and rebuilt the cache. System rebooted fine in 1080p mode but HDMI port still not working. Can you suggest what else I can try. Cheers Aubrey

Ran into some problems editing the DSDT.aml file I was using. MACiasl was not able to decode it and iasl.sh could decode it but found error when trying to recompile. However I discovered this DSDT-E6430-2CH.aml file in this guide which seems to have the patch already applied so opted to use it instead. It seems to work fine and I was able to boot up in 1080p mode - on the down side I don't seem to be able to use the external HMI port any more and the SD card is not working with the DSDT. My best option seems to be to try and sort out the decompile/compile issues with my first DSDT file. Any pointers you could give would be welcome. I've attached both DSDT files in case you want to look at them. Cheers DSDT-E6430-2CH.aml.zip DSDT-E6230-HD4000.aml.zip

Yes I have the dual mode cable and the LCD panel is working fine in the BIOS (in 1080p mode) and with Enoch. I will make the patch as you suggested and see if it gets me all the way to the desktop in 1080p Cheers

Happy to report that HMI and SD card working perfectly but need some help with upgrading to a 1080p lcd screen. After a bit of searching i found the DSDT-E6430-2ch.aml DSDT file and tried it out. After replacing the panel system boots up to the Apple timer but screen goes black around half way across - laptop continues to boot up and if I attach external HDMI there is a garbled display (looks like a section of the LHS of the screen is repeated a few times). How should I proceed? I expected that a DSDT file with dual-channel LVDS enabled would probably work OK with 1080p screen but perhaps this is not the case - maybe this DSDT file works only with 900p LCD screen. Is there a better DSDT file I can use? Do I need to patch my original DSDT.aml file. I found a few patch files (e.g. graphics_HD4K_high.txt) which I am happy to try - seems to change the ig-platform-id from 01 66 00 03 to 01 66 00 04. As always your expert help is much appreciated. Cheers Aubrey

Hi Guys Happy to report my installation is now working - my problem turned out to be with the org.chameleon.Boot.plist as it had UseKernelCache set to Yes instead of No - once I copied the kexts into /L/E and rebuilt the cache everything burst into life. Some remaining issues are 1. Trackpad works except that double tapping does not open anything and you have to use the trackpad button. I think this is a known issue as the trackpad panel in Settings is also blank. Anyone have a good fix or workaround for it? 2. Need to move from HD to FHD (1920x1080) screen. I'm guessing MacOS will adjust automatically or do I have to change settings or patch something? 3. SD card and HMI still to be tested but I'm guessing it should work straight off with the kexts I already have. 3. Dell UK keyboard will need a keyboard driver but I have made a few before so that should be pretty straightforward. Thanks again arcaman6

Thanks for the info. Tricchi can you go ahead and send your DSDT.aml and /Clover/Kext/10.12 folder. Many thanks. arcaman6

Thanks for all the feedback guys. I have actually used PikerAlpha's ssdtPRGen.sh and generated a new SSDT. This did not fix my problem unfortunately. So just to be clear I am doing the right thing - I generate the right SSDT for my processor and then do I need to remove the NullCPUPM from /Extra/Extensions? Cheers

Hi Tricchi Thanks for the offer - that would be very useful. I guess I would still need to change the DSDT.aml to work with an i7 processor?

Hi Working on an install of Sierra on Dell E6530 which has gone well up to a point. I have been following the excellent guide by Hervé from here. Had to do some work arounds as things seem to be a little different for E6530 than E6230 (which the guide was written for) but now at the stage where Enoch will boot the main OSX installation but it will stop with a message stating that AppleACPICPU kext has timed out. If you wait for a while you get the Apple splash screen and timer but the timer does not count down and booting has stopped. Booting with -x option and I can boot completely and OSX works pretty well but no sound and probably some other missing kexts. My E6530 has an i7 processor (i7-3630QM) so the Extra folder kexts from the E6230 guide may not be correct or there may be some other incompatibility. Can someone point me as to what to try? I guess I may need a different DSDT.aml? Other information which might be useful Have not copied kexts to S/L/E - they are being injected Standard HD screen but I intend to upgrade to 1080p one install complete. No NVidia graphics card. Has Intel WIFI card but have ordered DW1510 card to replace - currently using wired Ethernet connection Bios is A11 Disk is conventional HDD but will transfer contents to SSD when install complete - SATA is ACHI. 8GB ram Cheers

I agree with this - buy time by adding the copyright thing and find an alternate software ASAP - but would be happy to chip in if the decision is to pay the $500.