taddeusz

Mine was an upgrade, not a fresh install. Also using legacy boot, not UEFI. I tried once but I couldn't get Clover to boot with legacy mode disabled.

I upgraded my E6420 hackintosh to High Sierra and I immediately noticed that I'm no longer able to boot from the secondary drive bay. I usually have my Windows drive attached to the primary SATA port and have one of the drive adapters that lets me install a second hard drive in leu of the optical drive. I had my macOS installed there so I can dual boot between the two. With High Sierra that no longer works. When I try to boot macOS from the secondary port it KP's and is garbled so I can't read what it says. When the drives are switched around macOS boots and recognizes another drive is there but complains that it's having trouble reading it. I can boot Windows from the secondary port just fine so it's not a sudden hardware failure. It sounds like I might need to modify my DSDT but I wouldn't have the slightest clue what I need to do. I know High Sierra is still really new but any ideas?

I have one of these cards working on a Latitude E6420. I was wondering if you ever got Handoff/Continuity working? On my system they show the BT is capable of those functions but nothing happens when I try to do the Universal Clipboard. Other functions work fine like Airdrop. What I really would like to get working is the Apple Watch unlocking but it says that it cannot communicate with it. I decided to order a AW-CB160H/BCM94360HMB that will come next week but the U.FL to MHF4 adapter cables are shipping from China so they won't be here for a while. I'm hoping it will fix my Continuity issues but I thought I'd still try to troubleshoot my current card until then.

Ok, finally able to get back to it. Downloaded that new VoodooPS2Controller.kext and the trackpad is working now. Now if I can only get Tunnelblick to stop popping up it's preferences every time I boot up.

Yeah, this is the first time I've ever gotten the Clover kext patches to work with AppleHDA on this system. Not sure why they're all of a sudden working. But They are. I only have the three patches I listed enabled. I have the 8319D411 in my config.plist but I have it disabled.

I just downloaded it from the App Store and ran the install. I discovered that I first had to install the latest Clover. I tried running the install but when it rebooted the Installer partition wasn't available for boot. After updating Clover it booted fine until I encountered the VoodooPS2 error. It went by so quick I had to take a picture with my phone to see what it said. I did actually fix my audio problem. Previously I hadn't been able to get the Clover kext patches to work to fix audio so I was actually using a patched AppleHDA.kext. This time I seem to have found the right combination of patches. And there's also an additional patch that has to be applied for 10.12. Here are the patches I have, all are for AppleHDA: 8B19D411 => E7761D11 8419D411 => 00000000 8A19D411 => 00000000 And then install the DummyHDA.kext. So now all I have to to is figure out how to get the touchpad working. I found the only other caveats are that the volume and mute buttons are not yet working and the caps lock doesn't function reliably with the new VoodooPS2.

Upgraded my E6420 to Sierra. Got my BCM94352 working after some difficulties. For some reason Clover's FakeID is not working and had to switch to the FakeID kexts. One of the problems I ran into while upgrading is that the VoodooPS2Controller.kext needed to be updated. Was getting a panic on it. That resulted in the touchpad ceasing to function. That and I need to figure out how to get the audio working again. Other than the trackpad and audio I have a functioning system. Fortunately Bluetooth never stopped working and I have a Magic Mouse until I can get the trackpad working again.

Out of curiosity why do you have the AppleHDA kext patches disabled? What method are you using to get the HDA IDT audio working?

That one works and also lets the touchpad work as well. The only difference I notice is that the "Windows" key and Alt key are swapped.

Ok, on my E6420 I replaced the VoodooPS2Controller.kext with the latest version from RehabMan's repository. As expected the touchpad no longer works. However, I now have a new problem. Now if I boot without cpus=1 it hibernates during boot after the first part of the booting progress bar. Very weird.

What happens if you put that older version in S/L/E rather than having Clover inject it? RehabMan seems very against using Clover to inject kexts. He says to move all of them to S/L/E or L/E.

Can you post your config.plist? What DSDT are you using? Did you generate an SSDT for your system?

I see you have the discrete Nvidia video. Maybe it's something to do with the HD 3000 GPU?

I have done a clean install of 10.11.4 on my E6420 and have this problem. I was never offered any updates after installation other than iTunes 12.3.3.

I'm seeing this too except with a clean install of 10.11.4. I can get around it by adding cpus=1. Not ideal since only 1 core is being used.