quartz38 Posted January 9, 2018 Author Share Posted January 9, 2018 Hi, I have done some tests today. I created again a High Sierra USB key with terminal procedure and try several boot with different boot pack changing only ACPI /patched and config.plist. The folder kext is good tested. No more success, the key is in the patched folder and I have not the knowledge to patch it at this time.. So, if someone can patch mine which is in the first post or give me the way to do it .. many thanks by advance. PS : I have Sierra 10.12.6 running with everything (wifi, graphics, usb, etc ) if I can get information from it to help Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 9, 2018 Moderators Share Posted January 9, 2018 post your Sierra bootpack for review Ultimately, you just need to enable FixHeaders in Config under ACPI fixes Remove SSDTs (Cpu0Ist + CpuSsdt) Drop TableIDs (Cpu0Ist + CpuSsdt) in Config Update to latest Clover 4369 (time of writing) Update to latest Lilu.kext 1.2.1 (time of writing) Link to comment Share on other sites More sharing options...
quartz38 Posted January 10, 2018 Author Share Posted January 10, 2018 Hi Jake, i am going to try with your modifications. I joined the boot pack. Regards Bootpack.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 10, 2018 Moderators Share Posted January 10, 2018 try this quartz38.zip Link to comment Share on other sites More sharing options...
quartz38 Posted January 10, 2018 Author Share Posted January 10, 2018 Hi Jake, Not better i join the screenshot several time the same. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted January 10, 2018 Administrators Share Posted January 10, 2018 are you using nvme hard drive? Link to comment Share on other sites More sharing options...
viking1304 Posted January 10, 2018 Share Posted January 10, 2018 @quartz38 Few days ago I reinstalled HS 10.13.2 from scratch. Booting from USB and installation went without any problem. I took complete Clover folder from my USB, packed it and attached it for you. Please note that this one is not the same one I already sent to you over private message, which I made from latest generic EFI and latest bootpack that Jake posted. This one is slightly different, with different set of patched files. Those are also patched by Jake, but origin folder was from my machine. One of those should work on your machine. I guess it would be easiest to Mount EFI partition of your USB, delete complete Clover folder there and just paste this one from attachment. Just to be sure that everything is in right place. Also, please check those few things: 1. Check if this option is enabled in your BIOS. It must be turned ON 2. Use F12 every time during installation and be sure that you actually booting from USB 3. Check the Clover version (in the right bottom corner) and boot from USB 4. There will be two noticeable delays during boot. 5. After almost 2 minutes you should be on this screen Good luck! CLOVER_7450_HS.zip Link to comment Share on other sites More sharing options...
quartz38 Posted January 11, 2018 Author Share Posted January 11, 2018 are you using nvme hard drive? no sata 3 m2 thank you viking I am going to test Link to comment Share on other sites More sharing options...
quartz38 Posted January 12, 2018 Author Share Posted January 12, 2018 Hi, After testing same result for both... What could be differnt on my 7450 ?? I have noticed somthing, if i let the driver "VBoxHfs" disabled in config.plist the system does see the disk m2 ?? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 12, 2018 Moderators Share Posted January 12, 2018 Just add HFSPlus.efi /EFI/Clover/drivers64UEFI Link to comment Share on other sites More sharing options...
Recommended Posts