Jake Lo 1390 Report post Posted February 20, 2018 how are you waking the system? so what happens when you try wake it? Quote Share this post Link to post Share on other sites
satchitananda 0 Report post Posted February 20, 2018 By either hitting a key on the keyboard , clicking the buttons next to the touch pad and pressing the power key. Normally when the laptop is asleep the power led glows off and on , this isn't happening? Thanks for your quick reply Quote Share this post Link to post Share on other sites
Jake Lo 1390 Report post Posted February 20, 2018 If the power LED doesn't blink, then it's not sleeping. So if you click on Sleep from the Apple Menu, does the screen just go blank? Can you run this command and post the output? log show --style syslog | fgrep "Wake reason" Quote Share this post Link to post Share on other sites
satchitananda 0 Report post Posted February 22, 2018 I ran the command however I am not sure where too look for the output? Also if I select sleep from the apple menu it will goto sleep properly and wake properly, it appears the problem arises when I select say 5 minutes to goto sleep in Energy Saver system preferences. Quote Share this post Link to post Share on other sites
Jake Lo 1390 Report post Posted February 22, 2018 when you run the command on the terminal, it should spit out the result in the same window Not sure what you mean. When you set it to go to sleep say 5 minutes, what happens? Make sure you don't touch the keyboard or touchpad during the entire 5 mins. Sleep will be interrupted if movement occurred. Quote Share this post Link to post Share on other sites
satchitananda 0 Report post Posted February 22, 2018 Thanks again Jake, Here is the output: 2018-02-21 08:54:59.350414+1100 localhost kernel[0]: (AppleACPIPlatform) Wake reason: PBTN LID0 XHC (User) 2018-02-21 08:54:59.350655+1100 localhost kernel[0]: (AppleACPIPlatform) Wake reason: PBTN LID0 XHC (User) So when I allow the laptop to goto sleep after five minutes the screen goes black and then the machine becomes completely unresponsive , the power led is still on however not flashing ... Quote Share this post Link to post Share on other sites
Hervé 872 Report post Posted February 22, 2018 I would not expect this to be an issue but did you keep the unified display & computer sleep or revert to the separate settings as described here? Quote Share this post Link to post Share on other sites
satchitananda 0 Report post Posted February 22, 2018 I don't have the unified settings , I have the seperate settings as described and did not make any modifications to create the seperate settings Quote Share this post Link to post Share on other sites
thanhlongzzz 0 Report post Posted April 2, 2018 I had used Ralink 7601 USB wifi 480Mbps costs 3.5 USD and its working fine. Now everything works good. No Trackpad showing for R5 but working smoothly. Now Bluetooth working Wifi usb Ralink 7601 working Trackpad Working HDA sound working Card Reader Working All USB ports working. If admin allow me I want to contribute a Post and all files for the High Sierra Installation for E6540 with my laptop configurations. hi! can you give me a guide ! thanks so much! Quote Share this post Link to post Share on other sites
thanhlongzzz 0 Report post Posted April 2, 2018 hi, i copied and replaced from "E6540_HS_A22_disabled-HD8790M.zip" and screen like bellow. someone can help me ? Quote Share this post Link to post Share on other sites
