Mateusz Pisarek Posted January 31, 2018 Author Share Posted January 31, 2018 Hi, I made a backup of my previous EFI folder which worked before and install it over existing one... all seems to work with camera...i red about usb , it can be connected with camera...whatever...now I have percentage of battery visible and when i click on it, it always says "calculating time remaining..."-not showing the time of the battery... Can it be connected with too many kext in th EFI which has a conflict, sometimes i use different baterries with different capacities... Thank u for the answar I Link to comment Share on other sites More sharing options...
Mateusz Pisarek Posted January 31, 2018 Author Share Posted January 31, 2018 Sometimes battery precentage status is changing for a moment on X, when I clik on it it come back to percentage...Can it be connected with the fact of having 2 batery kexts on EFI SSD partition or having 2 battery kexts in Library? Same is happening with brightness...sometimes it change the brightness for a moment, looks like same issue...I was leading new kexts if the old one was not working...and sudenly all was working so I saved that folder...Can it be the problem? what u think? Thank you! Link to comment Share on other sites More sharing options...
Mateusz Pisarek Posted January 31, 2018 Author Share Posted January 31, 2018 sometimes the screen is getting really dark, i can fix it by pressing fn and arrow buttow to increase brightness(not mac brighteness function)...Can it be connected with the same-2 graphic kexts? or bios? i updated to A13 from A11... Link to comment Share on other sites More sharing options...
Mateusz Pisarek Posted January 31, 2018 Author Share Posted January 31, 2018 Here is my ssd efi kexts partition folder Link to comment Share on other sites More sharing options...
Mateusz Pisarek Posted January 31, 2018 Author Share Posted January 31, 2018 Sometimes i have nanosecond error When bootong after restart it is Ok, it boots niemal, sometimes this battery issue sometimes not, is it normal For hack? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted January 31, 2018 Administrators Share Posted January 31, 2018 that picture shows that you might not have followed all the instructions. you have a few duplicate kexts also what is in sle folder probably should have been installed to /l/e but it could just as well probably run from the clover other folder. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 31, 2018 Moderators Share Posted January 31, 2018 You are not using the files I provided here. You need to overwrite them, not merge. There's only 2 kexts you need to install to /L/E and they are in /EFI/Clover/kexts/Other/LE. You should not need anything else. Link to comment Share on other sites More sharing options...
Mateusz Pisarek Posted January 31, 2018 Author Share Posted January 31, 2018 Yes u r right! after i installed your pack, i cannot load into the system-there was huge boot error!!...so i go back to the old files, now I downgraded the bios do A11 and nanosecod error dissapered!...only issues that left are: 1. Brightness is changing itself 2. Baterry calculating... nest step: see if Jake is right.. JAKE, intsall them u mean copy from your folder to EFI Partiotion on SSD, than rebuild cache and than copy it to system extenstions??? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 31, 2018 Moderators Share Posted January 31, 2018 You could just copy them to /L/E, repair permission and rebuild cache. Link to comment Share on other sites More sharing options...
Mateusz Pisarek Posted January 31, 2018 Author Share Posted January 31, 2018 Yes it is the reason I guess, I have copied whole kext folder instead just S/L/E...Thank all is working for now I guess. Greetings from Poland Link to comment Share on other sites More sharing options...
Recommended Posts