Dell E6400/6500 research thread

[rokape]

Strange the shutdown fix should work.

Anyways try this DSDT: dsdt-shutdown.aml.zip

Just rename it to dsdt.aml and replace in /Extra/

Hi,

I use this for my e6400 but cpu p8600,ram 4g,nvs 160m wifi dell 1397.Sleep ok,vga qe-ci ok.so can you confirm it wwork well for me?some time,temp over 60*c

 

I use this dsdt but sleep can not wake up.Anyone fix it for me?

thanks.

dsdt.amlrok.zip

[rokape]

And anyone help me trackpad kext for scrolling?

[CypressPearl]

Could someone please help me troubleshoot why I can't get QE/CI to work on my e6400 Latitude with NVIDIA Quadro NVS 160M 256MB?

 

I am using this dsdt-mariusz2.aml.zip from (post 44 of this thread)

 

I have tried GraphicsEnabler=Yes with no luck.

 

According to Mariusz, Graphics should work with DSDT fix or GraphicsEnabler=Yes.

 

I am not sure what to do next...?

 

Here's some info from Linux lspci -nnvvxxx:

 

01:00.0 VGA compatible controller [0300]: nVidia Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1)

 

01:00.0 VGA compatible controller [0300]: nVidia Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller])

Subsystem: Dell Device [1028:0233]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 16

Region 0: Memory at f5000000 (32-bit, non-prefetchable)

Region 1: Memory at e0000000 (64-bit, prefetchable)

Region 3: Memory at f2000000 (64-bit, non-prefetchable)

Region 5: I/O ports at df00

[virtual] Expansion ROM at f4000000 [disabled]

Capabilities: [60] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [78] Express (v2) Endpoint, MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us

ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Not Supported, TimeoutDis+

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB

Capabilities: [100 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed- WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01

Status: NegoPending- InProgress-

Capabilities: [128 v1] Power Budgeting <?>

Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>

Kernel driver in use: nouveau

Kernel modules: nouveau

00: de 10 eb 06 07 00 10 00 a1 00 00 03 10 00 00 00

10: 00 00 00 f5 0c 00 00 e0 00 00 00 00 04 00 00 f2

20: 00 00 00 00 01 df 00 00 00 00 00 00 28 10 33 02

30: 00 00 00 00 60 00 00 00 00 00 00 00 03 01 00 00

40: 28 10 33 02 00 00 00 00 00 00 00 00 00 00 00 00

50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00

60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00

70: 00 00 00 00 00 00 00 00 10 00 02 00 a0 84 2c 01

80: 10 28 00 00 02 2d 00 00 4b 00 01 11 00 00 00 00

90: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00

a0: 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00

b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

 

Thanks in advance for your help.

 

CP

[saphire]

Dear Mr.CypressPearl

 

I think you maybe reset yout CMOS as default then reset AHCI, and try again hackintosh, if still fail, I suggest paste your chameleon picture here.

[saphire]

for me, my e6500, I just choose GUI, Timeout6, Kernel mach_kernel, System 2-Laptop, Restart fix, no need Graphics Enabler, but you can login with GUI.

[Guest o2kcorp]

Hi there, I still have shutdown problem on E6400. It doesn't shut down the laptop, power button stays on and hd is working. I use DSDT from Marius, dsdt-mariusz2. Can somebody help please?

[dalda.cz]

Hello all Dell 6400 users with Mac OS X.

I am beginner with Mac OS X and I have following problem:

I have Dell Latitude E6400 with Intel GMA 4500 graphics card.

If I use this with screen on build in display it works OK.

But if I use dock station with two Dell monitors 2x1650x1080 - os detect only one monitor ad switch to resolution 1024x768. In display settings I see only this resolution.

To be sure - I use Mac OS X Lion 10.7.3. and default apple kext for graphics.

Do somebody have some solution?

Thanks

//DALDA

[saphire]

To: Dalda.cz

 

My E6500 is nvidia, I have no dock station, but I have a 1920X1200 Dell monitor, I connect with VGA, all is right, it even can found all display method, mirror or expand are all normal (1920X1200 dual, 1600x1000, etc).

 

From your pasting, I think maybe current intel GMA4500 is not so good support.

My version is 10.7.3 X64.

[dalda.cz]

I have another Dell notebook with NVidia card, and there it is OK. It looks that problem is with some kext (driver) for Intel GMA4500 graphics.

No other idea?

Thanks for reply.

//DALDA

[Bronxteck]

well the gma4500 graphics only works in VESA mode no hardware acceleration, apple never used that graphics so no real support.