Moderators Jake Lo Posted January 5, 2019 Moderators Share Posted January 5, 2019 @z1326 add boot arg to Config.plist and install FakePCIID.kext + FakePCIID_Intel_HDMI_Audio.kext -igfxnohdmi For Brightness control for this model, use Fn+F3 = Dim Fn+Insert = Increase brightness @hansimglück2 Please post new debug Link to comment Share on other sites More sharing options...
hansimglück2 Posted January 6, 2019 Share Posted January 6, 2019 I have updated to 10.14.2 now. First i had some screen glitches but a change of the ID (HD4600) fixed it. Brightness control is working with Fn+F3 and FN+Insert but the symbols on the Keyboard are on FN+UP and FN+DOWN (can we remap these keys?) debug_12370.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 6, 2019 Administrators Share Posted January 6, 2019 Feel free to experiment with key stroke identification for subsequent remapping as detailed here: Link to comment Share on other sites More sharing options...
ethics Posted April 1, 2019 Share Posted April 1, 2019 what works on e6540? what bios are you running? wifi card? DST/kexts? Thank you. Link to comment Share on other sites More sharing options...
TheOtherOne Posted April 24, 2019 Author Share Posted April 24, 2019 hello there, I cleaned out my system and now I have one ssd with Mojave 10.4.2 and one clover boot manager. Before I had 2 or more entries on two or more efi partitions and wasn't really sure, where was were. So now I would like to update to 10.4.4 but get stuck in the install boot up with a kextstall (240) APPLEACPI...... and nothing happens then. Something is inside the deeps of the system what doesn't fit. And the bluetooth is gone, since I changed the system somewhat. I attached my system files and debug reports, hope it isn't missing something... Thank you for your help.... debug_22874.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 24, 2019 Administrators Share Posted April 24, 2019 Changing topic title since we've gone way past audio issues in 10.14.1... @TheOtherOne, you config is quite messy and needs tidying up, especially on the ACPI fixes and CPU power management front. Boot options look incorrect too. Specified boot volume seems wrong: you point to a /dev/disk2s2 device when one usually points to a partition name... Regarding kexts, you inject FakePCIID with none of it's PlugIns, so what do you aim to achieve with that? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 24, 2019 Administrators Share Posted April 24, 2019 did you try using your other EFI files. maybe that was the one you where using beforehand? Link to comment Share on other sites More sharing options...
TheOtherOne Posted April 24, 2019 Author Share Posted April 24, 2019 @Bronxtek: good idea but since Hervé is seeing the messed up efi folder , i’d better start cleaning up.... @Hervé it looks like this list now to bring it to the point i guess: 1.ACPI 2.CPU Power Management 3.Boot Options 4.FakePCIID without plugins Since I am not that into it, I am doing more with trail and error and reading around the net. This probably leads to messed up configs. Link to comment Share on other sites More sharing options...
TheOtherOne Posted April 25, 2019 Author Share Posted April 25, 2019 a bit of an update: after I updated every single kext and clover until it was saying I am up to date, I could update to 10.14.4 and after I added usbinjectall just to follow the guide of Jake_lo , suddenly I had bluetooth up and working again. I tried to clean up a bit, like the first config.plist from the guide . Note that I only use the clover configurator since I am not familiar with coding. Now the only thing a notice is the boot up procedure. almost every time it or second time it doesn't show the apple. It boots up, in verbose mode, then the screen goes black and flickers very lightly , then , after the ssd is done, the dell goes in sleep mode and then I have to press the blinking power button again and then the desktop is running. I got this ever since but now its really obvious and annoying. my files are following in a bit.... Link to comment Share on other sites More sharing options...
TheOtherOne Posted April 25, 2019 Author Share Posted April 25, 2019 so here is my current refi folder and log files how can I change the power management? not in the preferences I mean.... debug_26428.zip Link to comment Share on other sites More sharing options...
Recommended Posts