Jump to content
razor7

 [SOLVED] Need Help on Dell Inspiron i5570-7987SLV-PUS

Recommended Posts

Hi! I followed the guide here to create boot usb with mojave install app https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?tab=comments#comment-87342 Everything just fine but the installer hangs out at boot time at a very early stage

 

IMG_0840.thumb.JPG.eefc237975f21e7a23d17f9e6ed98f84.JPG

 

I have attached my laptop system specs got with CPU Z

 

Any advise is really appreciated.

 

Thanks a lot!

CPU-Z-LAP-DELL.txt.zip

CLOVER.zip

Share this post


Link to post
Share on other sites

No, if only if were just that!

 

There are many many mistakes and missing items with your Clover setup (config + kexts). Try the attached instead:

CLOVER.zip

 

Share this post


Link to post
Share on other sites

Readable details of specs are missing so here they are:

  • Intel dual-core Kaby Lake-U/Y i7-7500U @2.70GHz (Turbo boost up to @3.5GHz)
  • Intel HD Graphics 620 (PCI id 8086:5916)
  • 15.6 built-in LCD Full HD @1920x1080 or HD @1366x768 ?
  • 4GB DDR4-2400
  • Realtek RTL8101/2/6E Gigabit Ethernet (PCI id 10ec:8136)
  • Qualcomm QCA9377 802.11ac Wireless LAN (PCI id 168c:0042)
  • Audio ?
  • USB ports ?
  • Video outputs ?
  • Card reader ?
  • Webcam ?

 

Note that the Qualcomm WLAN card is unsupported and will have to be replaced by a supported model or USB dongle. See our FAQ section.

 

I recommend you lookup the other Inspiron 5570 threads in this section, many contains useful info + copies of Clover setups. You can use the forum Search facility if required.

Share this post


Link to post
Share on other sites

Hi @Hervé!

 

Full specs:

  • Intel dual-core Kaby Lake-U/Y i7-7500U @2.70GHz (Turbo boost up to @3.5GHz)
  • Intel HD Graphics 620 (PCI id 8086:5916)
  • 15.6 built-in LCD HD @1366x768
  • 4GB DDR4-2400 (Installed at slot B )
  • Realtek RTL8101/2/6E Gigabit Ethernet (PCI id 10ec:8136)
  • Qualcomm QCA9377 802.11ac Wireless LAN (PCI id 168c:0042)
  • Realtek Audio ALC3246 (PCI id 10ec:0256), also listed as Intel Sunrise Point-LP HD Audio (PCI id 8086:9D71)
  • Intel Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) (PCI id 8086:9D2F)
  • Video outputs: 1 x HDMI
  • Realtek USB 2.0 RTS5129 Card Reader Controller (PCI id 0BDA:9D2F on windows looks like USB\VID_0BDA&PID_0129&REV_3960)
  • Sunplus Innovation Technology Integrated_Webcam_HD (PCI id 1bcf:28c1on windows looks like USB\VID_1BCF&PID_28C1&REV_6505)

Share this post


Link to post
Share on other sites

Hi! I tried your CLOVER folder but I'm getting a KP at USB boot. If I enable RAID in UEFI firmware I can boot USB but no devices found, if I enable AHCI, USB gets KP.

 

Here's the video of the boot sequence hope this helps https://we.tl/t-k0SuPk1kNZ I can barely see the following:

CS_RUNTIME for entitlement: com.apple.rootless.kext-secure-managementpanic(cpu 3 caller 0xffffff7f9db83b30): nvme: "Fatal error occured. CSTS=0x1 US[1]=0x0 US[0]=0xb1 VID/DID=0x25228086 FW Revision=K4110401\n"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/IONVMeFamily-387.270.1/IONVMeController.cpp:5334

 

The laptop comes with a M2 Intel Optane 16GB SSD (i'm planning to switch it wirh a standard M2 SSD 480GB WesternDigital), could this device cause the panic?

 

I'm using Clover v2.5k r5033

 

Thanks a lot!

CLOVER.zip

Share this post


Link to post
Share on other sites

Set BIOS to AHCI. Raid is not supported without additional kext.

The error is due to NVMe driver. Try the WD. I had WD and it's working nicely.

 

Share this post


Link to post
Share on other sites

Hi! Thanks a lot for the reply.

 

My laptop is already on AHCI.

 

What do you mean with WD? Should I disconnect the Intel Optane card until I get my WD drive? I’m looking for WDS480G2G0B will it work? 

 

Thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...