arsradu Posted June 10, 2020 Share Posted June 10, 2020 :)) Told you it's probably easier this way. Well, at least in my opinion, it is. Stuck at that point, usually (at least in my experience) signifies an issue with FakeSMC/VirtualSMC. For as far as I can see, you chose to use VirtualSMC.kext. No problem with that (unless for some reason your laptop prefers FakeSMC.kext instead), but I think, for this case, you might also need the VirtualSMC.efi drier in drivers/UEFI. Seems to be missing in your case. Now, of course, I could be wrong and this might be an entirely different issue. Just sharing my own experience in case it helps. Link to comment Share on other sites More sharing options...
theawesomerb Posted June 11, 2020 Author Share Posted June 11, 2020 yep i included virtualSMC efi , still stucking at the end, maybe somthing is wrong with the config plist ? Also are other macOS version as hard as this catalina ? i mean i tried mojave with the same config Jakelo gave me it showed "report panic to apple" and didnt boot. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted June 11, 2020 Administrators Share Posted June 11, 2020 Guys, please refrain from using quotes to post replies. Forum provides a Reply box at bottom of pages. Link to comment Share on other sites More sharing options...
arsradu Posted June 11, 2020 Share Posted June 11, 2020 Sorry, Hervé. Didn't even realise I was using quote. Ok, will try to pay more attention to that. Thanks for pointing it out and editing to remove those quotes. @theawesomerb, in my experience, no, it's not. I mean, usually, at least for desktops, there are very few changes to make to the config (if any), from one version of MacOS to the other. And from Mojave to Catalina for example I don't think I had to change anything in the config. So no, it's not really common, at least on desktops. Could be be pretty common for laptops though. Link to comment Share on other sites More sharing options...
theawesomerb Posted June 12, 2020 Author Share Posted June 12, 2020 Guys i'm happy to tell you i made it at lease the install , i need one final help to finish this for start redownload olarilla new version from their website , i replaced ONLY the config plist provided by jakelo (BIG THANKS) ; after that, i started the install , on first boot i used the other config plist from olarila (because jakelo's causes it to crash on the final step), and voila , done deal , installed correctly and booted up the problem now , is the mouse , i can"t use the mouse pad , and the usb doesn't work, wifi doesn't work neither, please help on this final step , for 3350 owner i share with you the EFI that worked for me ethernet doesn't work neither , and when i sleeps i cant' get back , i'll have to shut it down mannually and reboot using usb stick 3350CustomBoot.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 12, 2020 Moderators Share Posted June 12, 2020 Which Config file are you using to boot now? I see Config3 is from my files. What wifi device does it have? We are not mind reader...we need detailed information. Intel wifi are not supported yet, so you'll need to replace it with a compatible device...ie DW1560, DW1830 or DW1820a. Avoid Atheros model. For mouse, replace the voodooPs2Controller with the version from my files and see if it make a difference. If it still doesn't work, you'll need the Alps version. You should be able to safely remove these kexts as well: You should understand what each kext is use for, remove unnecessary kexts AtherosE2200Ethernet //Atheros ethernet LucyRTL8125Ethernet //Realtek Ethernet SmallTreeIntel82576 //Intel Ethernet IntelMausiEthernet //Intel Ethernet NoTouchID // for model with TouchID to disable it NullCPUPowerManagement //disables powermanagement, mainly used for desktop system RealtekRTL8100 //realtek Ethernet XHCI-unsupported //Sata controller Add from my files the following kexts: AppleALC //needed for audio SMCBatteryManager //needed for battery status SystemProfilerMemoryFixup //add the Memory tab for About this Mac (Optional) Link to comment Share on other sites More sharing options...
theawesomerb Posted June 12, 2020 Author Share Posted June 12, 2020 Thanks Jakelo , i cannot thank you enough my friend, you re such a high quality member ! these are my first linnes from my use utilisation of hackintosh, thanks to you and arsradu. while waiting for your answer , i went ahead and removed the config , ktext and ACPI from the EFI and i put yourse, boom everything works except wifi , bluetooth and mousepad. i fixed the wifi problem by using my dongle DWA 131 , installed the driver from this generic software that supports alot of dongls https://github.com/chris1111/Wireless-USB-Adapter/releases/tag/V11 for the bluetooth i dont care for now about the mouse , should i use this : https://osxlatitude.com/forums/topic/8285-refined-alps-touchpad-driver/ (latest R6?) didnt want to try it out of the blue and maybe brake the system without your advice this is the last thing i need to fix then i ll make a tutorial for 3350 owners. Again i can't show you enough My gratitude Jake lo. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 13, 2020 Moderators Share Posted June 13, 2020 do you know if you have an Alp ps2 touchpad or an I2C touchpad? Go ahead and post the debug file Link to comment Share on other sites More sharing options...
theawesomerb Posted June 13, 2020 Author Share Posted June 13, 2020 well after I run the command here is what shows up Installing debug report generator.... Checking your internet connection.... Internet connectivity is all good to go. Downloading the latest version from GitHub... cp: /usr/bin/gen_debug: Read-only file system chmod: /usr/bin/gen_debug: No such file or directory Tool installed successfully. Would you like to generate a report now?[y/n]: y /Users/ /Downloads/install_tools.sh: line 54: gen_debug: command not found I looked around , is there something up with 'SIP' ? also the pc is being incredibly slow, 4go of ram isn't enough ? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 13, 2020 Moderators Share Posted June 13, 2020 Yes, for Catalina you need to disable the extra protection. See FAQ https://osxlatitude.com/forums/topic/12385-how-do-i-unlock-catalinas-protected-file-system/ 4GB of ram in today's standard is consider low. Need minimum of 8GB / 16 is better. Link to comment Share on other sites More sharing options...
Recommended Posts