momo123 Posted June 7, 2012 Share Posted June 7, 2012 We are running some tests on EDP 3 right now.. we have a few tricks up our sleves.. OK, so is there a walk through for this or not? Link to comment Share on other sites More sharing options...
torrent99 Posted June 10, 2012 Share Posted June 10, 2012 Anyone else having really bad performance with Intel x3100 & 10.7.4 on YouTube? (on a d630) Safari (via HTML5) is really awful about 2fps Chrome (via Flash) is 100% CPU and a bit jerky... Link to comment Share on other sites More sharing options...
Beebs9969 Posted June 17, 2012 Share Posted June 17, 2012 Hi All, I just wanted to let you know I got 10.7.4 up and running on my D630 Nvidia. I struggled a bit with trying the upgrade while on EDP2.2, every time I would upgrade, I would get the black screen problem. (it seems like there is a fix, I just can't find it). Anyways, what i did was to: Install MyHack Utils (My Hack 3.1) updated to EDP 3 Update to 10.7.4 Replace AppleACPIPlatform.kext with the older version Re-run epdtool and do a fresh install. The last step took quite a while in the setting permissions part, but eventually finished! The improvement with EDP 3 is actually really noticeable! Also, the machine seems to be running a lot cooler. Previously the temp was around 50-55 degrees during normal use, and up to 75 when taking a backup. Now it's hovering around 40degrees during normal use. I don't know whether it's the software reporting the wrong temp, or the speedstep emulator is just that much better......anyway, it makes me feel good about it and that's what's important!! Link to comment Share on other sites More sharing options...
momo123 Posted July 5, 2012 Share Posted July 5, 2012 @Beebs9969 Can you please post step by step of your procedure? TIA Link to comment Share on other sites More sharing options...
pckrullenbol Posted August 12, 2012 Share Posted August 12, 2012 Ok, so what you need todo is to copy the kext to your usb pen, boot from it and open terminal. 1. Mount your HD via the >>> mount -uw / <<< command [...] 3. copy the 10.7.3 kext to sle cp -R <path to good kext>/AppleACPIPlatform.kext /System/Library/Extensions/ Newby questions! 1. How do I mount the harddisk itself, I think with "mount -uw /" I only mount the usb-drive from which I boot? 2. What is the path to the kext when I copied it to rootlevel and it's name is (for example) "usb-drive"? Thanks! Link to comment Share on other sites More sharing options...
Administrators Syonagar Posted August 17, 2012 Administrators Share Posted August 17, 2012 Dear pc, Try "mount /dev/disk0sx /mnt" (where x is your partition number, 0 is its first and 1 if its second) Your need to copy it to /mnt/System/Library/Extensions. Cheers. Link to comment Share on other sites More sharing options...
Recommended Posts