kobaugilo Posted August 4, 2012 Share Posted August 4, 2012 hello guys, i was succesfully installed iFail L2 for e6320 unfortunately sys unable to boot due to kernel panic. see image what i have done 1- i was using bootpack for e6220 2- boot flag: -v -f -x GraphicEnabler=No 3- i am using original dsdt.aml which extracted from linux. i attached the dsdt.aml.zip any help is very much appreciated. TQ dsdt.zip Link to comment Share on other sites More sharing options...
Administrators Syonagar Posted August 6, 2012 Administrators Share Posted August 6, 2012 Dear koba, Try with just the bootpack. Dont use your vanila dsdt as it needs patching for it to be usable. Further the bootpack already has dsdt.aml that has been tested to work. Cheers. Link to comment Share on other sites More sharing options...
kobaugilo Posted August 11, 2012 Share Posted August 11, 2012 syonagar, sorry for the late reply. i was been quite busy for the past few weeks FYI, i have succesfully installed iFail l2 and using EDP but trackpad is not functioning. do you any suggestion how to make this thing work. TQ Link to comment Share on other sites More sharing options...
Administrators Syonagar Posted August 12, 2012 Administrators Share Posted August 12, 2012 Dear koba,Try the different ps2 options in EDP.Cheers! Link to comment Share on other sites More sharing options...
Tradear Posted September 14, 2012 Share Posted September 14, 2012 Hello all I've been trying to get 10.7.4 (apps store download) to run on E6320. Now i can install it without any problems. The problem i run into is i have to boot of the usb drive that i have the installer on with the unifail - Lion 1.5.3 that i created the usb from. If i install multifail for Lion, or mount lion or any other bootloader, i get a kernal panic. Any ideas how i can have the machine boot from HD not the usb. Thanks Link to comment Share on other sites More sharing options...
Tradear Posted September 14, 2012 Share Posted September 14, 2012 Hello all I've been trying to get 10.7.4 (apps store download) to run on E6320. Now i can install it without any problems. The problem i run into is i have to boot of the usb drive that i have the installer on with the unifail - Lion 1.5.3 that i created the usb from. If i install multifail for Lion, or mount lion or any other bootloader, i get a kernal panic. Any ideas how i can have the machine boot from HD not the usb. Thanks Fixed the boot problem with installing multifail 4.6.1 and then overwriting the Extra folder with the E6220 bootback and now the machine boots from HD don't have to use USB. working on other devices will update as i get more done. Link to comment Share on other sites More sharing options...
canteenboy Posted October 9, 2012 Share Posted October 9, 2012 Does anyone know how to get the integrated webcam working? Also, is it normal for the install of Mountain Lion to give an error? The update to 10.8.2 and iTunes 10.7 also gave errors but the version number updated. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 9, 2012 Administrators Share Posted October 9, 2012 [...] Also, is it normal for the install of Mountain Lion to give an error? The update to 10.8.2 and iTunes 10.7 also gave errors but the version number updated. As they say in many garages: "They all do that, Sir!" -> http://forum.osxlati...17-1082-update/ Link to comment Share on other sites More sharing options...
telanx Posted October 30, 2012 Share Posted October 30, 2012 Report: I successfully installed Mountain Lion 10.8.2 Original Version with Clover boot method on my Dell E6320. The dsdt.aml used Dell E6220's. Extra Extensions used Dell E6220's bootpack. Till now, only Sound/wireless/Powermanagement/speedstep/battery couldn't work. I will try to following things: 1.Modify the dsdt.aml to fit the E6320, try to fix the powermanagement and speedstep and battery. 2.Make a Fake AppleHDA.Kext for Sound card(IDT 92HD90BXX) 3.Buy a usb mini wireless card to get the wireless signal.....(shit, 6205N, no hope to get it work for ever!) Hope our osxlatitude.com could get more hardware to work normally. hehe -------------------------------------------------------------------- Updated on Nov. 4, 2012 1. I update the DSDT.aml file , and change from E6220's to a E6320's.(But still not support Powermanagement and speedstep for now...) 2. Update the AppleHDA.kext and Fake IDT 92HD90BXX kext, and the sound card works now. 3.I use a USB mini wifi card to instead of 6205N, and the type is EDUP EP-N8508GS, and use Green Wlan USB utility driver. Finally get the wifi signal. E6320 dsdt.aml E6320 dsdt.aml.zip Clover's Config.plist config.plist.zip IDT 92HD90BXX driver for Mountain lion 10.8.2(you could use Kext Utility to install the kext to S/L/E) 92HD90BXX.zip And the other's driver you could use Bootpack for Dell E6220's.(Include Ethernet drivers.) Link to comment Share on other sites More sharing options...
popoloni Posted November 13, 2012 Share Posted November 13, 2012 Hi all, can someone post a step by step tutorial on how to install 10.8.2 on this dell E6230? I appeciated telanx's post, but I cannot figure out what "with Clover boot method" means Thanks in advance 1 Link to comment Share on other sites More sharing options...
Recommended Posts