Administrators Hervé Posted August 31, 2015 Administrators Share Posted August 31, 2015 sudo touch -f /System/Library/Extensions sudo kextcache -Boot -U / -> You'll see the list of unsigned kext as reported by the OS. Basically, most add-on kexts and all modified/patched (ex-vanilla) kexts will be reported as "unsigned". Link to comment Share on other sites More sharing options...
cooper1 Posted August 31, 2015 Share Posted August 31, 2015 I have this: kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext BroadcomBluetoothHostControllerUSBTransport.kext kext file:///System/Library/Extensions/GenericUSBXHCI.kext/ is in hash exception list, allowing to load kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AtherosWiFiInjector.kext kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleIntelHDGraphicsFB.kext kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleHDAHardwareConfigDriver.kext kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleHDA.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBacklight.kext Link to comment Share on other sites More sharing options...
cooper1 Posted August 31, 2015 Share Posted August 31, 2015 Any try AppleUSBXHCI for usb3 ? Link to comment Share on other sites More sharing options...
cooper1 Posted September 1, 2015 Share Posted September 1, 2015 very please can you tell me what is the recommended setting of bios x201 for hackintosh? because I tried to do a new clean installation and I pressed the f9 the proposed arrangements and since then I do not run usb intaling os x ...... Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 1, 2015 Administrators Share Posted September 1, 2015 For those X201/X201s owners who have an erroneous Intel HD Graphics GPU reported in SysProfiler with dev id 0x2d10, try adding statement Name (_UID, 0xFF) to Device (UNCR) of your DSDT: Device (UNCR) { Name (_BBN, 0xFF) Name (_UID, 0xFF) // fix issue of QPI link 0 (pci8086:2d10) being reported as GPU in SysProfiler Name (_ADR, Zero) Name (RID, Zero) Name (_HID, EisaId ("PNP0A03")) Name (_CRS, ResourceTemplate () { WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x00FF, // Range Minimum 0x00FF, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, ) }) Device (SAD) { Name (_ADR, One) Name (RID, Zero) OperationRegion (SADC, PCI_Config, Zero, 0x0100) Field (SADC, DWordAcc, NoLock, Preserve) { Offset (0x40), PAM0, 8, PAM1, 8, PAM2, 8, PAM3, 8, PAM4, 8, PAM5, 8, PAM6, 8 } } } To reflect true MBP6,1/6,2 DSDT implementation, the brave ones may also consider: renaming Device (SAD) + subsequent references to SAD by IMCH renaming Device (UNCR) + subsequent references to UNCR by CPBG Link to comment Share on other sites More sharing options...
cooper1 Posted September 3, 2015 Share Posted September 3, 2015 cn't boot from usb after see this on my screen laptop close ( root device uuid is F0FF65BB-575C-3402-9AFA-5E58E693B09E ) I think that has to do with some setting in bios.... Link to comment Share on other sites More sharing options...
cooper1 Posted September 3, 2015 Share Posted September 3, 2015 ok i find how is the problem.....in bios i set default settings and i check "Memory Execution Protection" this was problem now is all ok...... Link to comment Share on other sites More sharing options...
cooper1 Posted September 6, 2015 Share Posted September 6, 2015 is it necessary to install NullCPUPowerManagement ? or Patch AppleIntelCPUPowermanagement ? my cpu stop to 2.39 it is not right and i dont have turbo boost to 2.90 ? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 6, 2015 Administrators Share Posted September 6, 2015 No need to patch AICPUPM for Arrandale CPUs, it's only required for Sandy/Ivy Bridge CPUs. Just make sure to have a tuned up FakeSMC kext, the right SMBIOS profile and P+C States generation activated. If you use NullCPUPM, well... its name should be self-explanatory... Link to comment Share on other sites More sharing options...
cooper1 Posted September 6, 2015 Share Posted September 6, 2015 I believe that the problem lies dsdt to calabach something is wrong also AC adpater is over heat....... Link to comment Share on other sites More sharing options...
Recommended Posts