ubuntu2014 Posted January 31, 2014 Share Posted January 31, 2014 Sorry for my english, it's not my first language I have installed mavericks on a dell latitude d630 with nvidia and everything works well however i think the cpu (T7100) is not completely giving good speedstep. On battery or main supply it gives me 1,79 Mhz the whole time. Second while the system shuts down it gives me an smc read key error at the end, this lasts 25 seconds and shut normally compleet down. (power off) This is the same way when the system is going to sleep. (blinking power led) Installed with my hack and extra boot files and edp after reboot. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 31, 2014 Administrators Share Posted January 31, 2014 Configure your BIOS as per recommended settings in the pinned thread of this very section. If all looks well on that front, you probably did not install emulated SpeedStep within EDP. Not to worry, just head over to Articles pages of the web site (not the forum) and look for the performance tuning article. This will give you all you need to configure native CPU speedStep and native GPU throttling on your D630 nVidia laptop. There's a summary of tuned-up settings here. Link to comment Share on other sites More sharing options...
ubuntu2014 Posted January 31, 2014 Author Share Posted January 31, 2014 i don't have the keys RVBF and RVUF in my running fakesmc content , the rev is there still i don't know what to do Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 31, 2014 Administrators Share Posted January 31, 2014 Read the article + linked thread more carefully please. Everything is explained and provided. You cannot keep your default FakeSMC kext! Link to comment Share on other sites More sharing options...
ubuntu2014 Posted January 31, 2014 Author Share Posted January 31, 2014 Speedstep works, hoera Many thanks Herve, it works!! And thank you for the patience. With kind regards.................................. Link to comment Share on other sites More sharing options...
ubuntu2014 Posted February 1, 2014 Author Share Posted February 1, 2014 This is sill coming ;when the system shuts down it gives me an smc read key error at the end, this lasts 25 seconds and shut normally compleet down. (power off) This is the same way when the system is going to sleep. (blinking power led) Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 1, 2014 Administrators Share Posted February 1, 2014 Where do you see those SMC read key errors? Oh, can you indicate which version of Chameleon boot loader you're running? You can safely update to the latest available through Cham Wizard. Link to comment Share on other sites More sharing options...
ubuntu2014 Posted February 1, 2014 Author Share Posted February 1, 2014 if i boot in -v, its running "normal" when i shut down i will see this information.. Link to comment Share on other sites More sharing options...
Kjescha Posted March 22, 2014 Share Posted March 22, 2014 I also get a smc:ReadKeyAction Error (F0Ac) on shut down. I could fix it by adding the missing key to FakeSMC.kext, but I'm not sure if this is the right way to fix the error. Especially because Hervé don't get this error on his D630. I checked my BIOS setting and updated Chameleon boot loader, didn't work for me. I have a second partion with Mavericks on it. Before I updated and reconfigured EDP I didn't get the error on shut down. Any idea? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted March 22, 2014 Administrators Share Posted March 22, 2014 you have to add F0Ac to fakesmc and get the data from a real mac SMC dump from the model you are emulating. Link to comment Share on other sites More sharing options...
Recommended Posts