npjohnson Posted February 26, 2014 Share Posted February 26, 2014 Ok... you have a realtek reader, then head over to voodooforums and use voodoosdhci and modify the info.plist for your model. Link to comment Share on other sites More sharing options...
nnware Posted February 26, 2014 Author Share Posted February 26, 2014 I'm not using GenericUSBXHCI. I'll try later. - I already tried to modify info.plist of VooDooSDHC. But it doen't work. I think VooDooSDHC is made for Ricoh, TI and JMicron Card Readers, not Realtek PCIe Card Reader. Link to comment Share on other sites More sharing options...
nnware Posted February 27, 2014 Author Share Posted February 27, 2014 I tried to install GenericUSBXHCI with and without serval options. GenericUSBXHCI was loaded normally but no effect to sleep function. When I close lid or choose 'sleep' from menu, LED(on Powerbutton) starts blinking and Fan stop. When I open lid or type keyboard, Fan starts spin up but LED is still blinking and Display stays on black. And I can't find any words related to sleep/wake on system.log. Link to comment Share on other sites More sharing options...
npjohnson Posted February 27, 2014 Share Posted February 27, 2014 If you are using and voodoosd card driver, remove it, it has that effect. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted February 27, 2014 Administrators Share Posted February 27, 2014 you can check in chameleon wizard app the option to enable backlight and see if that works. Link to comment Share on other sites More sharing options...
nnware Posted February 28, 2014 Author Share Posted February 28, 2014 On 2/27/2014 at 6:03 PM, npjohnson said: If you are using and voodoosd card driver, remove it, it has that effect. VooDooSDHC(with and without mod) is nothing to effect on my system. So I already removed. To modify VooDooSDHC, I need to edit only vender,device ID on IOmatchname section on info.plist of VoodooSDHC. is it right? On 2/27/2014 at 6:10 PM, Bronxteck said: you can check in chameleon wizard app the option to enable backlight and see if that works. I try it but no effect. I think enablebacklight option is for ATI and nVidia GPU. My laptop has nVidia GT 730M but 730M doesn't work. works with only Intel HD4400. can't boot without option SkipNvidiaGFX=y Display Sleep, Brightness and Dim are working after patch DSDT. I also tried wake on LAN. Ethernet port LED is active on sleep but nothing will happen. I think I have to patch DSDT for wakeup from sleep funtion. Link to comment Share on other sites More sharing options...
redhippys Posted April 22, 2014 Share Posted April 22, 2014 you are using file send me. Please. 'ALC292 appleHDA & HDAEnabler' redhippys@gmail.com Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 23, 2014 Moderators Share Posted April 23, 2014 On 4/22/2014 at 5:24 AM, redhippys said: you are using file send me. Please. 'ALC292 appleHDA & HDAEnabler' redhippys@gmail.com Try latest voodoo 2.8.5. Link to comment Share on other sites More sharing options...
redhippys Posted April 24, 2014 Share Posted April 24, 2014 On 4/23/2014 at 4:28 AM, Jake Lo said: Try latest voodoo 2.8.5. Thx. But I was already in use. I just wanted to try to install an AppleHDA. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 24, 2014 Moderators Share Posted April 24, 2014 On 4/24/2014 at 3:18 AM, redhippys said: Thx. But I was already in use. I just wanted to try to install an AppleHDA. Try this by Mirone. Note that the headphone jack will only give you white noise. See thread here. Same issue for this codec on Dell E7440 too. Link to comment Share on other sites More sharing options...
Recommended Posts