Moderators Jake Lo Posted January 9, 2015 Moderators Share Posted January 9, 2015 BOOT 0 ERROR If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following. Reboot system back into Yosemite installer (USB FLASH DRIVE). Launch Disk Utility Unmount the partition you installed Yosemite on Launch Terminal and execute the following command: diskutil list (to find the Disk Identifier of your Yosemite partition (eg. disk0s2) dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 Exit Terminal Boot Normally Note: if you encounter an error that boot1h is not found when running step 6, download attached and place it in the USB Installer/usr/standalone/i386 and start from step 1 again reference: http://www.macbreaker.com/2012/02/hackintosh-boot0-error.html boot1h.zip 1 Link to comment Share on other sites More sharing options...
corydon Posted January 9, 2015 Share Posted January 9, 2015 Thanks Jake! It works! Link to comment Share on other sites More sharing options...
VNMan Posted January 20, 2015 Share Posted January 20, 2015 Following this guide to make my USB for my E6420. Will report on how it works since I have the NVS 4200M on my model. Been having issues booting up my USB. Will update this post once I try to reboot again Edit: So far the install seems to be going alright and it boots fine. I'll upload the required stuff for those who run the nvidia model of the e6420 once I get everything working or at least a majority of it. This booted with injected nvidia for running the NVS 4200M Can you give me an update on how you get your e6420 to boot from Clover without issues (do you have any issues?) I used Jake Lo boot pack and try all DSDT that included and got no problem with Chameleon. I for the life of me cannot get Clover to boot properly, always got to login screen with stripes purple and low resolution (this is with difference DSDT, Optimus Enabled/Disabled). Also tried 10.10.0 and AppleHDA (ver 267) got sound. Tried 10.10.1 got no sound. Help. Anyone? Link to comment Share on other sites More sharing options...
geiti94 Posted January 30, 2015 Share Posted January 30, 2015 Sorry for my english i am german. i tried with your guide to install os x 10.10 but i cant install any bootloader on my ssd to got os x bot without usb drive. i want to install it in uefi how i can make? Edit: that are the specs of my dell intel core i7 2640M 6 gb ram 512gb crucial ssd intel HD 3000 a13 bios Link to comment Share on other sites More sharing options...
Gia Cát Lang Posted February 3, 2015 Share Posted February 3, 2015 Sorry for my english i am german. i tried with your guide to install os x 10.10 but i cant install any bootloader on my ssd to got os x bot without usb drive. i want to install it in uefi how i can make? Edit: that are the specs of my dell intel core i7 2640M 6 gb ram 512gb crucial ssd intel HD 3000 a13 bios please watching video install i have laptop dell e6420 run yosemite 10.10.2 full ( wifi , vga or hdmi ) https://www.youtube.com/watch?v=kH9TDSlejPc&list=UUnKlFcsK8YUJmGOoReoyZHw 1 Link to comment Share on other sites More sharing options...
geiti94 Posted February 4, 2015 Share Posted February 4, 2015 I got os x runing days ago but i cant install clover in the efi partition. I copied the efi folder manualy in the efi partition but i cant boot it from uefi loader. the efi partition is not hiden i dont know why. here 2 pics: On the right you can see the efi partition. i dont know why it is not anymore hiden what is working: webcam microphone audio qe/ci speedstep etc what is not working: clover in efi partition imessage/facetime (i not have injectet the mbl an rom of my old imac 5.1) Link to comment Share on other sites More sharing options...
zodiacg Posted April 16, 2015 Share Posted April 16, 2015 get OS X running and able to boot from EFI partition on HDD. clover installer can't install itself to ESP, so i have to do it manually. but I still can't get audio working. I'm sure i installed DummyHDA.kext using kextwizard and fix permissions. Also EVERYTIME i successfully boot into OSX, my BIOS will change Optimus to disabled. So next time, when i reboot or shutdown->powerup, i have to go to BIOS and enable Optimus then reboot again to make everything working. couldn't figure out why ==== update: sleeping is not working. trying to switch to chameleon according to Jake's guide Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 16, 2015 Moderators Share Posted April 16, 2015 Try enabling Apple RTC in Clover Config to prevent BIOS reset For audio, do you have npci=0x2000 or npci=0x3000 enabled under Boot? if so, remove it. That should fix audio... Just looked at the config file and notice it has audio inject to 03 where the DummyHDA is set to layout-id 12 (hex=C). The DSDT has it patched to layout-id 12 as well. So, just remove the Clover injection should fix it. Link to comment Share on other sites More sharing options...
Umar Posted October 18, 2015 Share Posted October 18, 2015 Dear i never used clover can u please guide for legecy and uefi options for usb installer which ones to select there two images i hope u understand what i m tryimg to say when i come to select custom option for for bootloader thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 18, 2015 Moderators Share Posted October 18, 2015 for this model, use legacy. 1 Link to comment Share on other sites More sharing options...
Recommended Posts