OSXnoob Posted February 10, 2015 Author Share Posted February 10, 2015 OK Laptop boot Thanks I must change inject kexts to Yes.. i have all extra kext in Clover... In console: 10.02.15 09:40:12,000 kernel[0]: ACPIBatteryManager: Version 1.55 starting.10.02.15 09:40:12,000 kernel[0]: ACPIBatteryManager: Using ACPI regular battery information method _BIF battery symbol is not displayed When i Change the brightness with FN+Up/Down the display goes full black.. before i can change the brightness in small steps... But now i can see the Brightness slider on system-monitor I think i make a new install.. all kext that i need are in clover.... i have made to much change In the Bottom of display looks like crazy/funny Picture in Zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 10, 2015 Administrators Share Posted February 10, 2015 Battery icon appears to the Finder bar when you click on the associated case in the Energy Saver PrefPane. If the icon does not stick, you must replace the AppleSmartBatteryManager kext in /S/L/E by the alternative copy I uploaded or use VoodooBatteryManager, but the latter does not always work in Yosemite. Link to comment Share on other sites More sharing options...
OSXnoob Posted February 10, 2015 Author Share Posted February 10, 2015 I have made a new install... When i used your dsdt the battery status is not ok... and i habe graphic bugs.. now i used no dsdt and i have a battery status on the top.. it change between no battery with x in it and battery status ok.. i think it is because this laptop can used 2 batterys. in console: 10.02.15 14:30:20,000 kernel[0]: ACPIBatteryManager: Version 1.55 starting.10.02.15 14:30:20,000 kernel[0]: ACPIBatteryManager: Version 1.55 starting.10.02.15 14:30:20,000 kernel[0]: ACPIBatteryManager: Using ACPI regular battery information method _BIF10.02.15 14:30:20,000 kernel[0]: ACPIBatteryManager: Using ACPI regular battery information method _BIF batterymanager starts 2 times... It is realy bad that i don't can patch the dsdt myself without the dsdt sleep don't work Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 10, 2015 Moderators Share Posted February 10, 2015 So your system is able to sleep with the patched DSDT? The DSDT is also patched to injects fake desktop HD4600 id 0x0412 to replace mobile HD4600 id 0x0416, so you might not need QECI HD4600 (GT2 Mobile to Desktop) in your Config.plist. This might fix the video issue. As for Battery, try an older version 1.53 or voodooBattery as Herve suggested. Note: The MacBook Pro.acpi in your attachment are not patched, don't include it in EFI/Clover/ACPI/Patched folder. Only place the generated SSDT.aml and my DSDT.aml there. Link to comment Share on other sites More sharing options...
OSXnoob Posted February 10, 2015 Author Share Posted February 10, 2015 i have delete all patche in clover.. but your dsdt and my ssdt in patched and your config... and reboot.. Now i have make a video and zip my complete clover folder.. perhaps you find a mistake many thanks for your help -- I have download acpibattery 1.50 and it looks good I think this problem ist ready now the new bug that the graphic is not liquid.. you see this in the video... and sleep doesn't work.. perhaps it is only a setting problem in clover.. Before i used the dsdt i can switch brightness with fn+up/down with the dsdt i can't use the fn+up/down only in system/monitor perhaps it is normal Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 10, 2015 Moderators Share Posted February 10, 2015 Ok, this should fix it. Battery repatched to use with 1.55. Rename to DSDT.aml For video, install the FakePCIID kexts you had earlier to S/L/E. For Brightness control, try Fn+F3 (NumLock) and Fn+Insert (Pause) Can you also list your system spec? Does it have Optimus nvidia card as well or just HD 4600? E6540.aml.zip Link to comment Share on other sites More sharing options...
OSXnoob Posted February 11, 2015 Author Share Posted February 11, 2015 Fn+F3 (NumLock) and Fn+Insert (Pause) works fine... is it possible to change ist to fn+up/down? I have only the hd 4600 I have copy FakePCIID_HD4600_HD4400 and FakePCIID to SLE and Graphics works but the bugs in the top are back... picture in zip Battery with the new dsdt switch again between no battery and battery ok.. With the first dsdt battery works really good In are some pictures.. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 11, 2015 Moderators Share Posted February 11, 2015 Add this to config.plist under KextToPatch <dict> <key>Comment</key> <string>Enable TRIM support for non-Apple SSD</string> <key>Find</key> <data> QVBQTEUgU1NEAA== </data> <key>Name</key> <string>IOAHCIBlockStorage</string> <key>Replace</key> <data> AAAAAAAAAAAAAA== </data> </dict> <dict> <key>Comment</key> <string>Bootloader Graphics - Second Stage Patch 2</string> <key>Find</key> <data> QYjE6xE= </data> <key>Name</key> <string>IOGraphicsFamily</string> <key>Replace</key> <data> QYjE6zE= </data> </dict> <dict> <key>Comment</key> <string>Enable 96MB BIOS, 34MB Framebuffer, 34MB Cursor for Azul framebuffer 0x0a260006</string> <key>Find</key> <data> BgAmCgEDAwMAAAACAAAwAQAAYAA= </data> <key>Name</key> <string>AppleIntelFramebufferAzul</string> <key>Replace</key> <data> BgAmCgEDAwMAAAAGAAAgAgAAIAI= </data> </dict> <dict> <key>Comment</key> <string>Enable eDP port 0x00, HDMI port 0x05 for Azul framebuffer 0x0a260006</string> <key>Find</key> <data> AAAIAAIAAAAwAAAAAQUJAAAEAACHAAAA </data> <key>Name</key> <string>AppleIntelFramebufferAzul</string> <key>Replace</key> <data> AAAIAAQAAAAwAAAAAQUJAAAIAACHAAAA </data> </dict> Repatched DSDT to remove PNLF, should be able to use Fn+Up and Down arrow for Brightness, but without the "sun" emblem. Also revert back to previous Battery patch E6540.aml.zip Link to comment Share on other sites More sharing options...
OSXnoob Posted February 11, 2015 Author Share Posted February 11, 2015 Thank you Must i delete the 2 kext FakePCIID_HD4600_HD4400 and FakePCIID in SLE? I have reboot with the new dsdt... Battery works.. FN+Up/dorn works thanksss But now Graphic show 7 MB i think it is why i don't have the kext to patch in Clover I have copy it in my config.. but when i open it in clover.. i see a empty config Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 11, 2015 Moderators Share Posted February 11, 2015 No, install the 2 kext FakePCIID_HD4600_HD4400 and FakePCIID with kextwizard to SLE. Here's the fixed config file. config.plist.zip Link to comment Share on other sites More sharing options...
Recommended Posts