Dr. Hurt Posted December 29, 2016 Author Share Posted December 29, 2016 Well, I had a good look at the log and first thing I noticed is that x and y sometimes have unrealistic values. They cannot be >127 so I filtered those out. 3: - Filter out any packet reporting x or y >127 (not sure if I should filter or just set to zero so let's experiment) - remove V8 valid packet check from interrupt (yet another attempt at sleep). - disable trackstick buttons for now. ========= I wish I could see how x and y values change in response to trackstick direction. You could use "Jake Lo 2" build and try to figure out a pattern. Things like x bigger or smaller than y, positive or negative, in relation to direction change. Good Luck Jake Lo 3.zip Link to comment Share on other sites More sharing options...
Dr. Hurt Posted December 30, 2016 Author Share Posted December 30, 2016 The sleep problem on some Latitudes is caused by a bad BIOS/EC. (According to Linux ALPS developers) R6RC2: - Ignore invalid packets (instead of buffering). FIXED SLEEP ON V7 LATITUDE CONFIRMED BY "bigahega". (It should fix sleep on V8, V3 Rushmore as well.) Known issues: - V7 and V8 tracksticks disabled. (till someone fixes it or helps me fix it) - V6 not supported. - As usual, most settings in prefpane won't work. They're not made for ALPS. R6RC2.zip 1 Link to comment Share on other sites More sharing options...
bigahega Posted December 30, 2016 Share Posted December 30, 2016 Yep I have E5450 with V7 and sleep/wake is working with this latest RC2. Thank you Dr. Hurt. 1 Link to comment Share on other sites More sharing options...
tanpengsccd Posted December 30, 2016 Share Posted December 30, 2016 toggle the ISO type in info.plist this is keyboard 's Info.plist.thanks. Link to comment Share on other sites More sharing options...
tanpengsccd Posted December 31, 2016 Share Posted December 31, 2016 E5430 ALPS: Found a V3 Rushmore TouchPad with ID: E7=0x73 0x03 0x0a, EC=0x88 0x08 0x1d R6RC2. Touchpad will not work after hours. log.zip Link to comment Share on other sites More sharing options...
okieiam Posted December 31, 2016 Share Posted December 31, 2016 The sleep problem on some Latitudes is caused by a bad BIOS/EC. (According to Linux ALPS developers) R6RC2: - Ignore invalid packets (instead of buffering). FIXED SLEEP ON V7 LATITUDE CONFIRMED BY "bigahega". (It should fix sleep on V8, V3 Rushmore as well.) Known issues: - V7 and V8 tracksticks disabled. (till someone fixes it or helps me fix it) - V6 not supported. - As usual, most settings in prefpane won't work. They're not made for ALPS. Happy New Year 2017 every one. Very smooth scroll speed, tap to click, everything work 2016-12-30 11:01:54.573994+0700 0xf6 Default 0x0 0 kernel: (kernel) ALPS: Found a V7 TouchPad with ID: E7=0x73 0x03 0x0a, EC=0x88 0xb6 0x06 2016-12-30 11:01:54.574000+0700 0xf6 Default 0x0 0 kernel: (kernel) ALPS: ButtonPad Detected... Link to comment Share on other sites More sharing options...
tanpengsccd Posted January 1, 2017 Share Posted January 1, 2017 Happy New Year。 E5430 ALPS: Found a V3 Rushmore TouchPad with ID: E7=0x73 0x03 0x0a, EC=0x88 0x08 0x1d I try Jake Lo 3.zip,seem to work fine! My keyBoard has not number pad,the Fn key is not match the Function,like Fn + â¬†ï¸ should turn up the brightness,but it don't work. how can i adjust it? Thanks ! Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 1, 2017 Moderators Share Posted January 1, 2017 Use Fn+F3 to decrease and Fn+Insert to increase. Link to comment Share on other sites More sharing options...
minhhien1996 Posted January 1, 2017 Share Posted January 1, 2017 V7 on latitude E5450. R6RC2, everything work fine. Sleep makes no problem, scroll is extremely smooth. Thank you so much, @Dr. Hurt. last week I must come back to the old ApplePS2Controller for stability, and now I think your kext is stable enough for a release. 1 Link to comment Share on other sites More sharing options...
giang_asl_8 Posted January 2, 2017 Share Posted January 2, 2017 2017-01-02 23:53:26.048760+0900 0x103 Default 0x0 0 kernel: (kernel) ALPS: identify: not an ALPS device. Error getting E6 report 2017-01-02 23:53:26.048763+0900 0x103 Default 0x0 0 kernel: (kernel) ALPS: identify: not an ALPS device. Invalid E6 report 2017-01-02 23:53:26.372120+0900 0x103 Default 0x0 0 kernel: (kernel) ALPS: identify: not an ALPS device. Error getting E7/EC report Hi, everyone, I'm new here. Tried with R6RC2, trackpad not work (above log shows that). Keyboard works. My hw is ALPS V8. It works fine on JakeLo_v2 before. Some more questions please. - My display is 4k and scrolling/tracking speed is quite slow with default kext. Must change reduce Resolution and ScrollingResolution in info.plist by 2 times (set to 200) to have a decent speed (as on Windows), which I guess caused by 4k resolution (or not???). So it would be useful if there's some detection for screen resolution to adjust the value automatically. - The JakeLo_v2 works fine (2 fingers scrolling, 3 finger gesture, tapping. But 2 fingers right click works very unstable. 6,7 of 10 times it fails (find no same report in this thread, wonder it's caused by the 4k resolution too?) - In #1 it states that 3/4 finger gestures are supported, and I confirmed it works with 3 fingers. Does this kext support 3 and 4 fingers separatedly (that means total 4 gesture, up/down 3 fingers and up/down 4 fingers). Tested with 4 fingers and it seems to report 3 fingers gesture only. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now