elnino1981 Posted July 17, 2016 Share Posted July 17, 2016 A bit different, but still nothing...https://www.dropbox.com/s/oeljwzq2x8dcjd2/IMG_20160717_082509.jpg?dl=0 And after I started system without patched files, I recognized some issues with trackpad so I went back to the previous controller. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 17, 2016 Moderators Share Posted July 17, 2016 Try this v2.zip Link to comment Share on other sites More sharing options...
elnino1981 Posted July 17, 2016 Share Posted July 17, 2016 Without panic, but stucked on:https://www.dropbox.com/s/f1revwq3psar334/IMG_20160717_102134.jpg?dl=0https://www.dropbox.com/s/3u5dcojbgn93ezh/IMG_20160717_102149.jpg?dl=0 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 17, 2016 Moderators Share Posted July 17, 2016 Make sure to enable DropOEM in SSDT. If that still not working, then remove SSDT-1 and SSDT-2 Link to comment Share on other sites More sharing options...
elnino1981 Posted July 17, 2016 Share Posted July 17, 2016 After I have enabled DropOEM under SSDT, system booting fine but still not sound.Brightness buttons started working.I repaired twice permissions and rebuilded cache with the commands below but still without the sound....sudo chmod -Rf 755 /L*/E*sudo chown -Rf 0:0 /L*/E*sudo touch -f /L*/E*sudo chmod -Rf 755 /S*/L*/E*sudo chown -Rf 0:0 /S*/L*/E*sudo touch -f /S*/L*/E*sudo kextcache -Boot -U /https://www.dropbox.com/s/cuuxbs15dppvbxb/IMG_20160717_122417.jpg?dl=0Please see video attached, you will see that commander is loaded on the startup....https://www.dropbox.com/s/skvxpu7kmfru7x3/TRIM_20160717_123200-0.mp4?dl=0 And now i can see audio devices on System report: https://www.dropbox.com/s/lfa3weyc3rgo1k7/Screen%20Shot%202016-07-17%20at%2013.54.56.png?dl=0 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 17, 2016 Moderators Share Posted July 17, 2016 Problem is your config does not have the hot patches for the dummyHDA. I added the audio patches and bluetooth patch to your config. Your config also using ig-platform-id = 16160002, whereas mine uses 16260006. Your HDMI might not work, change it if it doesn't. Don't forget to generate SSDT for you CPU. See my E7450 guide for link. config.plist.zip Link to comment Share on other sites More sharing options...
elnino1981 Posted July 17, 2016 Share Posted July 17, 2016 After using new config got panic again. https://www.dropbox.com/s/6mo3sanp5hicf3a/IMG_20160717_163037.jpg?dl=0 What do you suggest. Do I have to change smbios? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 17, 2016 Moderators Share Posted July 17, 2016 Try my config or remove the bluetooth patch from your config and see if that fixes it. Yes, maybe change your SMBios too. Link to comment Share on other sites More sharing options...
elnino1981 Posted July 17, 2016 Share Posted July 17, 2016 So, one big thanks to you again, for your hard work and for your patience with me... I don't know how, but I did it. Sound now is working well. I just downloaded somewhere patched applehda.kext and I just have putted this to the S/L/E folder, ran the repair of permissions and rebuild of cache.... Here is my Clover folder zipped, for someone with same hardware. https://www.dropbox.com/s/mu859lv40wh7lng/CLOVER.zip?dl=0 Now I will backup the system with time machine, or do you know some good software for HDD cloning? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 17, 2016 Moderators Share Posted July 17, 2016 I use Carbon Copy Cloner, but you'll need to reinstall the Clover loader. Link to comment Share on other sites More sharing options...
Recommended Posts