absint0o Posted October 25, 2016 Author Share Posted October 25, 2016 Jake, if i set it in UEFI mode it gives me that error that i've showed you, so in order to access the macOS i have to set it to legacy mode as i show in this photo: i've also run the diskutil cs list and it gave me this: Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 25, 2016 Moderators Share Posted October 25, 2016 Ok, looks like you do have CS. 1) From terminal, enter diskutil list. Note the virtual drive in red. diskutil list /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *256.1 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage Macintosh SSD 63.5 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 (internal, virtual): #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh SSD +63.1 GB disk1 Logical Volume on disk0s2 75DADC16-4B7F-4C7D-9660-10A1C2A9FC02 Unencrypted 2) From terminal, run diskutil cs revert /dev/disk1 3) Reboot with USB Installer and select the Installed drive 4) Install Clover 5) Replace the Clover files in /EFI/Clover from USB installer 6) Reboot without USB Link to comment Share on other sites More sharing options...
absint0o Posted October 25, 2016 Author Share Posted October 25, 2016 Nice!!!!! It worked!!!!! Thanks alot! I have two more questions, i don't know if i have to open new topic: it's possible to automatically choose when booting to clover the option to go directly to the OS without me having to choose? All the components in the Dell works except the microphone, the speakers work great and in the system preferences - Sound - Output i can see the internal speakers but when i go to the input nothing shows up. Is there any fix for this? Once again, thanks for your help! Cheers! Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 26, 2016 Moderators Share Posted October 26, 2016 it's possible to automatically choose when booting to clover the option to go directly to the OS without me having to choose? Lauch Config.plist with Clover Cofigurator. Next to Boot tab, change the Default Boot Volume to exactly the name of your OS X drive name (case sensitive) Below it, change the Timeout to 1. This gives you a little time to select other drive to boot in case you want to or access Options in case you have boot issue. All the components in the Dell works except the microphone, the speakers work great and in the system preferences - Sound - Output i can see the internal speakers but when i go to the input nothing shows up. Is there any fix for this? See here Link to comment Share on other sites More sharing options...
absint0o Posted October 26, 2016 Author Share Posted October 26, 2016 Thanks Jake, the boot volume is now automatically chosen! thanks! for the microphone, i've downloaded the kext but i don't know where to put it, i put it in the EFI/CLOVER/Kexts/Other/LE where i have this: Or i put it in the /Library/Extentions where i have this: Doi have to run any command like those from post-installation (step 8)? Thanks once again Jake! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 26, 2016 Administrators Share Posted October 26, 2016 I don't believe BCM5722D LAN kext applies to the E Series... Kexts placed in the EFI/CLOVER folder are injected at startup. Once you're happy you've got the right kexts, move them to /L/E from where they can be cached, which improves startup time. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 26, 2016 Moderators Share Posted October 26, 2016 Actually a lot of the E5xxx series have Broadcom rather than Intel Ethernet. @absint0o, You need to remove AppleHDAIDT from /L/E. Make a backup of AppleHDA.kext in /S/L/E Install Wern's AppleHDA to /S/L/E Change DSDT layout-id to 0 (use MacIASL.app) Fix permission and rebuild cache Link to comment Share on other sites More sharing options...
absint0o Posted October 26, 2016 Author Share Posted October 26, 2016 Hi there, i've downloaded the kext from the zip called AppleHDA.kext_11.10.4.zip and put it in the /library/extensions, then, i ran those commands from the step 8 in the post installation section and then rebooted, then the sound stop working and disapeared from the devices output and the mic still not showing up in the devices input. EDIT: Jake, i will try your method than report here! Link to comment Share on other sites More sharing options...
absint0o Posted October 26, 2016 Author Share Posted October 26, 2016 i've done the first three steps you say, but in the MacIASL i found this: what thing do i have to change to 0? i literaly change the string "layout-id" to a 0? i have to compile or patch after changing to 0 or i just need to save and exit? i have to delete the AppleHDA.kext from the EFI/CLOVER/Kexts/Other to? Thanks once again Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 26, 2016 Administrators Share Posted October 26, 2016 change the first 0x0C to 0x00 Link to comment Share on other sites More sharing options...
Recommended Posts