Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. Today
  3. 2 x things you should do when joining our forum: read the rules read the FAQ
  4. I have two drives in my laptop: one with my current system, and the other one with a bootable backup and a partition for different files. The old system was 10.12.x on HFS+, and it stayed like that on my backup drive. But the newly updated one is now APFS, and it doesn't recognize the second drive, even though it's perfectly healthy and I can boot from it to the old system. Disk Utility doesn't see any partitions on it and says that it's "Uninitialized". I checked, I still have HFSPlus.efi on my EFI partition, and I also have an HFS+ partition on my system drive and it's recognized. Did anyone have this issue? What can it possibly be? Here are two diskutil list listings, first from my backup (see disk1) and the second one from the new system (see disk2). ➜ ~ diskutil list /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_APFS Container disk2 80.2 GB disk0s2 3: Apple_HFS Temp 39.5 GB disk0s3 /dev/disk1 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *320.1 GB disk1 1: Apple_HFS MacBackup 73.8 GB disk1s1 2: EFI EFI 209.7 MB disk1s2 3: Apple_HFS VIDEO 245.9 GB disk1s3 /dev/disk2 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +80.2 GB disk2 Physical Store disk0s2 1: APFS Volume Mac 37.6 GB disk2s1 2: APFS Volume Preboot 45.1 MB disk2s2 3: APFS Volume Recovery 519.8 MB disk2s3 4: APFS Volume VM 20.5 KB disk2s4 diskutil list /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_APFS Container disk1 80.2 GB disk0s2 3: Apple_HFS Temp 39.5 GB disk0s3 /dev/disk1 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +80.2 GB disk1 Physical Store disk0s2 1: APFS Volume Mac 38.0 GB disk1s1 2: APFS Volume Preboot 45.1 MB disk1s2 3: APFS Volume Recovery 519.8 MB disk1s3 4: APFS Volume VM 20.5 KB disk1s4 /dev/disk2 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: *320.1 GB disk2
  5. i have tried DW1820A on Dell XPS 13 9350 and Envy 13-ah0xxx, result is freeze when open speedtest on safari.
  6. OK thanks. So is it useless for me to waste time the only solution and change the card right?
  7. Did you see this part? Working: Graphics with Acceleration Audio with patched AppleHDA Bluetooth /Wireless (Replaced with DW1560) : It means the Intel is not supported, as a matter of fact ALL Intel Wireless device is unsupported. You'll need to replace it with a supported card. I recommend DW1560 but you can look through this list for other supported card
  8. Hi, i have this laptop: LAPTOP HP ENVY 17.3" -K206nl- 12GB Ram Intel Core i5-5200U with Intel HD Graphics 5500 (2.2 GHz, 3 MB cache, 2 cores) NVIDIA GeForce 840M (2 GB DDR3 dedicated) Will this package work on my laptop?. Thanks, and sorry for my English, im Spanish.
  9. Hi, I recently got this Dell E7450 notebook. I installed Mojave following the forum guide. And using the recommended clover folder. Everything works the first time it is installed. Except the wifi. The card installed is the following: 7265NGW You can help me solve. Thank you
  10. Hervé already answered to your question. I just add a link to his intruction (for intel bluetooth, but similar procedure for other manufactures)
  11. Yesterday
  12. Just close the lid and reopen. It should resume
  13. where do I start with diagnosing why the audio has stopped working on my E7470, running 10.13.6
  14. I was running the RM version from the .zip in first post. Installed the latest from SF which fixed not being able to boot. Updating to .2 and .3 went without any issue or changes needed. Guess I was lucky lol. Thankfully the fix was easy. This laptop has seen daily usage for nearly 6 months now. Running as smoothly as my macbooks. Very content with it.
  15. I think there's a chance you're not looking at your Clover config in the right place... Depending on your BIOS mode and the way in which you installed Clover you may or may not have a hidden EFI partition with the Clover folder inside. Usually, you'd have that partition which you require to manually point to access and modify the Clover config file. You should also check that "Configs" menu in Clover screen to ensure you boot the default "config" file and not another one that may be next to the default file.
  16. BLEEP! I know that I missed the AirportBrcmFixup kext, but I don't know how I dropped in the wrong config.plist with the option "brcmfx-country=#a.". (In my rather weak defense, I'm fighting a lung infection right now and I'm juiced to the gills on antibiotics and some real nasty stuff called prednisone.) I pulled the AirportBrcmFixup kext and installed the proper config.plist. The WiFi is still dropping and I'm still getting system lockup's. I have tested my hardware under both Windows and Linux and everything seems solid under both OS's, so it has to be a configuration under OS X. {EDIT} I'm going through the debug logs and I noticed this in /debug/panic_logs/Kernel_2019-04-21-125438_zogs-MacBook-Pro.panic: Boot args: dart=0 debug=0x100 -v abm_firstpolldelay=16000 brcmfx-country=#a I KNOW that that argument has been removed from my config.plist and that it is not showing up on the boot screen under options, (please see attached pic). I have used both Clover configurator and a text editor to examine the config.plist and I can't find any entries for this, so I don't know how the "brcmfx-country=#a" keeps showing up, (perchance the problem isn't a PEBKAC?). I also noticed this in the same file: panic(cpu 1 caller 0xffffff80162cda42): "Spinlock acquisition timed out: lock=0xffffff8016ac26a8, lock owner thread=0xffffff8030fe3540, current_thread: 0xffffff8033e67a50, lock owner active on CPU 0x0, current owner: 0xffffff8030fe3540, time: 355411561712"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-4903.201.2/osfmk/i386/locks_i386.c:467 I'll Google this later, going back to bed now. Here are my latest dumps debug_6016.zip zogs_MacBook_Pro_5.ioreg config.zip
  17. Read the DW1820A guide Remove AirPortFix Clover fix Remove brcmfx-country=CN Clover boot option Remove AirportBrcmFixup from Clover kexts folder Make sure you run on full vanilla 80211Family kext in /S/L/E
  18. I am very grateful for your support. Here my clover wishes you for help and checking. @Hervé CLOVER.zip MacBook_Pro.ioreg
  19. You still have the AirportBrcmFixup kext + associated boot option brcmfx-country=#a... But I'm tempted to say your problems lies elsewhere unless you tell us that your system runs fine without the DW1820A; in the case I could only suggest you replace it by another model. Update to 10.14.4 too.
  20. OK, so I very meticulously did a step by step of the install in the following manner: As before, the system initially boot fine and the WiFi works. However, as before, after about 5 minutes, the system starts having slow downs and the starts to lock up. The WiFi also drops out at the time. One small thing that I noticed is when I run the following post install commands, I get this "error" sudo pmset hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo pmset hibernatefile /dev/null Usage: pmset <options>\ See pmset(1) for details: 'man pmset'} So I am wondering if my problem has something to do with hibernation mode, although when I pull the WiFi card, the freezes and lock ups go away. I have attached all if the files that I am using below, along with the latest output from IORegistryExplorer and a post install debug file. EFI_r4910.zip Exx50_Mojave.zip Jake Lo's config.plist.zip zog’s_MacBook_Pro_4.ioreg debug_32395.zip
  21. Update to latest Clover... https://github.com/Dids/clover-builder
  22. I can’t get .4 to install. Either update or clean. I have updated all kexts on the installer like AppleALC, WhateverGreen and Lilu. No updates for the others exist. The installer boots but never makes it to the gui. After a long wait it says kextd stall for AppleACPICPU. Update: installing the latest Clover fixed it!
  23. It does not seem like there is any kext loaded for a Broadcom-based attached to PXSX device located @1C,4. Are you sure it's the right location? Double check your Cover config and injected kexts in case you have something clashing. If you want further assistance, please post a zipped. copy of your Clover config + saved output of IORegistryExplorer. You should know the drill by now; impossible to say more in the blind...
  24. I still have audio device output with bluethooth output, PCI also does not receive. @Jake Lo @Hervé
  25. Last week
  26. Your last config appears Ok and the IOReg output seems to show everything is Ok too. You've injected your properties under PciRoot(0x0)/Pci(0x1c,0x03)/Pci(0x0) as opposed to PciRoot(0x0)/Pci(0x1c,0x03)/Pci(0x0,0x0) as explained on the guide but I'm not certain it actually changes anything. I noticed that you added BrcmFixup kext since you're using boot option brcmfx-country=#a. Why don't you try without it? I've clearly mentioned the consequences of such option in the guide... This being all duly applied, all should be Ok on your wireless front as far as I'm concerned AS LONG AS you run on the full vanilla kexts off course!
  27. Hmm, I see what your talking about. I found this in between the "<key>Audio</key>" section and the "<key>PciRoot(0x0)/Pci(0x1b,0x0)</k" section: Not sure what I did there, but I have been using updated the config.plist that Jake Lo posted. I think that I will do a clean install with the updated config.plist and see what happens.
  28. @Hervé I'm pretty sure that I used Jake Lo's, with the change from pci14e4,4353 to pci14e4,4331. Just to be safe, I recopied the contents of EFI_r4910.zip and Exx50_Mojave.zip, (replaced, not merged), and the attached config.plist, (Jake Lo's - unmodified). I then rebooted and had the same problem. I did another dump with IORegistryExplorer and I have attached it below. zog’s_MacBook_Pro_2.ioreg config.plist.zip
  1. Load more activity
×
×
  • Create New...