gebele04

Hello everybody, As shown in my signature, I'm a dell e6420 and 5570 Hackintosh user and they work fine. I've got a MSI GT73vr 6Rf under Win10 and it works perfectly on it but I would like to install Mojave on this laptop. Here is its configuration: Intel i7-6820HQ 32 Gb DDR4 Intel HD530 and Nvidia GTX1080 8 Gb DDR5 (I know I can't use this card) Screen resolution 1080i/p 2 x 256 Gb M.2 NMVe Samsung RAID 5 1 Gb 7200 rpm HDD Can someone help me to install Mojave on this Laptop ? I've tried different EFI posted on this forum based on same CPU without any success. Thanks in advance

I've updated Mojave 10.14.1 to Mojave 10.14.2 with applestore update proposed today without any problem. The system works perfectly. The update "weights" about 2,6 Gb, the full version about 6,1 Gb

Hello, I've connected the dw1830 with only 2 antennas on P1 and P2. The performance are very good, as much as good than with my TP-TL725N. The dw1830 has been recognized natively in Mojave. Effectively, it requires any driver. The problem was with the bluetooth fonction but after the injection of 3 kexts, everything works perfectly. But on mine, there was any damage than your's. Not sure it will work properly...

These few words to thank this community who help me to install High Sierra on a Dell latitude e6420 and Mojave on a Dell Inspiron 5570. Special thanks to Jack Lo and Kostas54. Without their support, I think I'll be actually a windows user...!!!

For Mojave installation, format your destination hard drive in APFS mode

Hello Kostas54, With your previous EFI Folder version, I don't observed this kind of problem. I can close and open the lid without reboot. Grég

Hi, Hervé said: "And stop using TMX tools to seek support here after.". Sorry for that, excuse me... I made a fresh installation on the dell e6420 of High Sierra and now, the ethernet intel 82579LM controller in now active. It may have conflicts... After switching the ethernet port to en0, iMessage and FaceTime are fonctionaly. Thanks

Thank for your answer Jake Lo. I've checked, it's enabled.

Hello everybody, I've got two hackintosh at home: Mojave on Dell Inspiron 15 5570: works perfectly (special thanks to Kostas54 and Jake Lo) and the second on an old dell latitude e6420 High Sierra (i5-23xx, intel HD3000 1366 x 768, 8Gb and 256 Gb SSD, TP-Link TP-WN725N wifi module) On this e6420, I have some troubles to use iMessage and FaceTime . After some research on internet, the problem may comes from ethernet issues. After checking in my configuration, I saw I had any ethernet hardware configured. So, I decided to install IntelMausiEthernet.kext or AppleIntelE1000e.kext independently via multifail in \Library\Extension or in \Clover\Kexts folders but It still doesn't work. Has someone any idea where the problem comes from ? Thanks for your answer. Grég

Did you try the EFI from Kostas54 for his 5570 ? Configuration seems to be approximatively the same, depending of your screen resolution (Here 1080p)

I recognize that macOS runs perfectly on this laptop but I'm a new user (since about 1 month) on this OS. For the moment, I'm not using Win10 on this dell because I'm using my MSI GT73 for this. What I saw, Win10 installed with the Dell default factory seems to not be optimized. I will try today to install an original Microsoft downloaded version. Do you use a dual boot too ? Do you know which kexts I have to install for the SD card Reader (I'm not a user of this hardware but as you said, I just want this system perfect, if I can) Thanks Grég

Hello Kostas54, Is your SD card reader working properly ? (not mine) Should we add a AppleSDXC kext or an other one ? For your information, my dual boot Win10/Mojave works perfectly.

Hello Kostas54, I've connected the dw1830 with only 2 antennas on P1 and P2. The performance are very good, as much as good than with my TP-TL725N. The dw1830 has been recognized natively in Mojave. Effectively, it requires any driver. The problem was with the bluetooth fonction but after the injection of the 3 kexts below, everything works perfectly. Do you remember which kexts you have installed for the dw1810 BT module ? So, I could delete it because it's not require for my system. The SSD M.2 860 EVO Samsung 500 Gb works very well and the addition of 8 gb DDR4 2400 CL17 Crucial too. My system is just perfect because of you and this community. Today, I will install the dual boot with Win10 on the SSD Sata 240 Gb after cloning the original hard drive delivered with this laptop (HDD 1To 5400 rpm) Grég

Hi Everybody, I've got a problem with my Dell 5570 Hackintosh. I was using so far my new laptop with 8 Gb memory and a SSD Sata Kinston 240 Gb. Yesterday, I've installed 16 Gb memory and added a M.2 Sata Samsung Evo 860. I had re-installed Mojave on the M.2 SSD and modified bios setting to boot on this drive. I've formatted the Sata SSD Kingston 240 Gb (MS-DOS / MBR) for dual boot Windows 10 I've copied/pasted old EFI folder on the new M.2 SSD but the trackpad doesn't work anymore. Do you know why ? I've done any modification in the Kexts folder or the config.plist... Thanks for your answer Grég EDIT: SOLVED. I made a fresh install and it works. I had some issues with bluetooth on DW1830 module because there were some kexts missing in kexts folder. It's quite normal because Kostas54 doesn't have this equipment but the DW1810 module were only BT works properly and not Wifi/BT both. So, I've added these kexts in /EFI/CLOVER/KEXTS/ Folder: FakePCIID.kexts BrcmFirmwareData.kext BrcmPatchRAM2.kext Now, both Wifi and BT work properly

Hello Kostas54 I've just received my new SSD M.2 Sata Samsung 860 EVO and 8 Gb DDR4 ram for upgrade. The DW1830 wifi/Bt module is not yet arrived. Is there something to modify in the system for a correct working ? For my understanding, what is the objective of your debug_24997,zip file ?

Kostas54 said: "There are 2 problems , first battery readings from activity monitor are inaccurate (compared to bios,ioreg and coconut battery). Second problem is that brightness doesn't autmatically change when connect/disconnect power cord." @Kostas54: When I unplug the power cord, the brightness automatically change on my laptop. When the brightness in the room decrease, Mojave automatically adapts desktop's colors and luminosity.

For my curiosity, all drivers present in Kexts folder are loaded, even if the hardware is not present ?

I've bought a DW1830. The shipping delay is about 5 to 10 days. It comes from Germany. If I've understood everything, I can delete the RealtekRTL8100.kext in the Clover/Kexts/Other folder, isn't it ?

Thank you so much for all. If I can do something for helping, please let me know... Grég

Here we are ... About 5% difference ... Does your EFI folder integrated the kext for the DW1560 ? If I buy the DW1830, should I Modify something or is this hardware natively recognized in Mojave as said ? Please let me know if you need something else. It's only 10:45 AM in France now...

OK, I've unplugged the sector connector till 85%. Is that the understanding ? (Sorry I'm French and my English is perfectible)

Here is a full screenshot. The values (for me) are the same but maybe I don't watch what I should. The only problem I see is the battery temperature sensor (-273,3°C !) It is the temperature of the N2 liquid (Nitrogen) Excuse me for the size of the picture. It comes from my iPhone via iMessage because I've tried to make a screenshot with the keyboard shortcuts but I can't find how to do this (I don't know where is this command ⌘) Grég Edit: OK, I've found how to make screenshots with my keyboard shortcuts (I had to redefine key in Preference System)

Here is the picture: hope it will need you. When I compare, the values are the same. If you want a screenshot, please let me know.

OK, I'm downloading it. What should I do after running test ?