Jake Lo

Yes, add this to KextToPatch. You'll need cache to be working in order for this hot patch to work or you could manually patch the kext. Comment Disable minStolenSize less or equal fStolenMemorySize assertion, 10.11.4 ( (based on Austere.J patch) Disabled Find QTnEdio= Name AppleIntelSKLGraphicsFramebuffer Replace QTnE6yo=

There's no DSDT/SSDT in your folders, so Boot to Clover GUI, hit F4. Continue booting to OSX Compress and attach /EFI/Clover/ACPI/Origin folder here. Please use "More Reply Options" on lower right to attach instead of external storage.

Try new boot files E5470_repatch.zip

Where are you failing now? Did you move the DIMM as suggested?

Please list the system specification. CPU? Graphics card? Vendor of the Touchpad? LAN? Wireless? Do you have patch DSDT/SSDT? If not, then boot to Clover GUI, hit F4. Continue booting to OSX Compress and attach Clover folder here. Please use "More Reply Options" on lower right to attach instead of external storage.

2) Closing the cover will put system to sleep. Open the cover, system will wake up 3) If you're following that guide, then you're not using the bootpack from post #2 and updating the PS2 kext. Clearly there's no patched AppleSDXC and AppleHDA in there. SD carder is enabled throught DSDT patching and audio is enabled through AppleHDA_ALC292 (dummyHDA) and hot patching.

Which guide did you follow and bootpack did you use? Sleep / Wake should work when closing / opening LID. You shouldn't have to use a patched AppleSDXC and AppleHDA kext. Your error looks like you have the wrong version of VoodooPS2Controller. Replace with Dr.Hurts version 5 Final.

INSYDEH20 bios using a different process. You can google it, someone already have a guide out there.

You can also use SMBIOS MBP11,2 but replace board-id with that of iMac14,2 or even MBA6,2

It's 8086 9D03. No Sata patching was done on the origin DSDT and works perfectly fine on my system. I have a Precision 5510 with 8086 A102 with the same patching and it's also detected. Recheck your BIOS, make sure AHCI is selected, Legacy ROM enabled, UEFI enabled.

I don't have an E5470, but the Config file in my E7x70 bootpack works on my system.

Will it wake if you tab the power button? Which bootpack are you using?

Step is needed only if virtual drive is found Note: If you see the following, then follow steps in Post #3 Under Core Storage before proceeding /dev/disk1 (internal, virtual): So looks like you were able to proceed to the installation and now on Post Installation, was it by moving the DIMM Slot A?

Files from post #12 was able to detect the internal SSD on my system. Do you have NVMe drive or regular SSD drive?

Check the DIMM on your system, make sure you don't have an empty DIMM A. If you only have 1 stick, make sure to move it to A.

What symtom are you encountering? It won't auto sleep? It sleeps but wakes right away? It reboots instead? Can you click on Apple Menu and select sleep? Please give more info.

Did you download the bootpack and replace them to /EFI/Clover?

Yes, you can add more to DIMM B, just can't have an empty DIMM A. If the TP-Link USB is OS X supported then it should either just work or you need to install kext. You'll have to get the kext (driver) from the vendor.

Afterward is fine.

What do you have in your system currently? If it's an Intel, it's not supported and will need to be replaced. See here for supported / unsupported cards. You'll need to determine also what connector it has M.2 or MiniPCIe M.2- go for DW1560 MiniPCIe - go for DW1550

Did you follow the post Installation? 7. Copy kexts from /EFI/Clover/Kexts/Other/LE to /Library/Extensions of Macintosh SSD Note: Ignore warning/error messages and click OK, then run commands below. 8. Repair permission and rebuild cache. Run command from terminal sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

See my Clover guide here, bootpack is in post #2

What Windows should is not indicative of what is set in the DVMT. I believe you should have set both 0x15b and 0x15c to 0x3, otherwise you'll continue encountering that KP.

You'll need to set the DVMT to 96MB for graphics to load without KP. Follow my Clover guide to make the installer and use the E7x70 bootpack leaving out the DSDT/SSDT and changing the DROPOEM SSDT to NO. That should get the Install to boot your system, Hit F4 to extract raw file, continue with the installation. Post progress afterward for further assistance.

You didn't set the DVMT to 96MB as required for Broadwell graphics to load.