Jump to content

kfiatos

Members
  • Posts

    60
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by kfiatos

  1. @Jake Lo do you have.a clue what value to change in info.plist for ApplePS2SmartTouchPad.kext to make 2 finger scroll faster? Or maybe there is a way to contact the developer of this kext? Tried some changes but didn't work (Asus with FocalTech) touchpad
  2. Is it worth upgrading from 10.12.3 to newest Catalina on E7440? Performance is the same? I am ok with current build but curiosity is stronger @Jake Lo
  3. Tried that and it changes nothing. Another issue. Im having trouble getting my e7440 to post. Everytime I shut down my 10.12.3 I can't make my dell to boot at all (have to wait and try again many times). I mean no bios even. I had this issue before and motherboard was at fault? Does Your also not boot from time to time? Is it maybe related to osx? Maybe dsdt patching brokes something? I dont know
  4. Ditched hibernation idea. Could You help me with battery indicator? I just used my dell for over one hour having 1% of battery. Is it possible to fix it? Tried googling but, don't know what to look for
  5. Is it even remotely possible to get hibernation to work on our hackintosh? Tried googling but can't find straight answer
  6. This seem to be working perfectly for my problems with usb after sleep. I have only one little issue. After waking from sleep and logging in, I can work for about 40-60 seconds and then screen goes black. If any key is pressed the picture comes back and it never occures until next sleep. Any thoughts? HD4400 with HDMI working
  7. Thank you. I'll do more testing tomorrow, going to sleep now. Ill edit this post with answer if this worked
  8. Could You please remove not needed lines for me? You're very profficient with dsdt
  9. My DSDT DSDTtest.aml.zip
  10. Could you please elaborate Hervé? It was almost year ago when I last touched DSDT and I can't remember what I did then with DSDT
  11. I'm having trouble with bluetooth after sleep. I use DW1550 and bluetooth is properly loaded when system is booted but I get bluetooth unavailable when waken from sleep. I managed to pinpoint that usb is at fault. When booted the 2070 chip is listed in usb devices but after sleep it is not there anymore. I really don't know where to start debugging? Clover? DSDT? SSDT? Maybe I miss a kext. I'm using Bluetooth firmware uploader 3.1.5 from this forum, same issue is with Rehabman's version. Please point me a direction to go to
  12. On Sierra 10.12.1 and V3 inertia is little choppy in last phase of scrolling. Same kext (R5) on 10.11.6 is super smooth. Apple changed something?
  13. I cloned my 10.11.3 installation to Liteon SSD (256L9M) and so far it works ok. I still can't figure out what caused filesystem corruption on sierra. Anyway, Yesterday tried to update 10.11.3 to sierra and I failed miserably. What is the upgrade procedure that You guys used? I downloaded Sierra from appstore, prepared efi (working for my previous tries with sierra) booted installer (worked fine, WIFI even working), installed and after reboot, KP. I cant even tell what caused KPs because error not saying this. If I boot system in safe mode I get "Invalid sandbox profile for PID xxx " at it never ends. Any suggestions? Today I'll revert to 10.11.3 and try updating from usb key
  14. Pablo2401, On E7440 trackpad inertia is working just fine, maybe it is an issue of 6430u. What touchpad device do You have?
  15. Kudos Dr. Hurt for this version! It is progress for me. Right edge works ok but bottom was still dead. I set FingerZ = 1 SwipeDeltaX/Y = 400 and it is perfect for me. E7440 Rushmore V3 Gestures work, trackpad works all around, 2-finger scroll is perfect, trackstick works with scrolling. After editing above lines it is final version for me. If someone wants, feel free to check it out. Thank you Dr. Hurt, now I can update to Sierra. This one thing was holding me back. Release 5 RC3 by Kfiatos.zip
  16. R5 RC2 feedback: v3 Rushmore e7440 bios A15 PROS 2 finger scroll great, responsive, no gap between fingers required, nice inertia effect 3 and 4 finger gestures are ok trackstick works ok for me, speed seems perfect, no scrollig at all trackpad movement seems smooth but, rehabman's version and your R4 with v/h = 1 is smoother CONS on my setup bottom and right edges seem irresponsive, about 10mm from bottom and 5mm from right, also the same effect is near left and top edge but less disturbing trackpad seems to be recognized smaller than it is actually
  17. V/HorizontalScrollDivisor = 1 and 0 changes nothing for me. Trackstick works great for me, except for scrolling (not working at all). Rushmore v3 e7440. If you could merge scrolling from this version to R4 it would be perfect for my setup. I make all tests on 10.11.3
  18. R5 RC1 feedback: v3 Rushmore E7440 - 2 finger scrolling perfect - smooth and responsive - trackstick scrolling doesn't work at all - bottom part of my touchpad doesn't response to touch - photo - R4 with h/v scroll divisor set to 1 was much better in normal usage - this version is choppy / not smooth / less sensitive to touch - one finger scrolling not on the edge of trackpad (about 5mm from edge) and very fast
  19. Dr Hurt, Is the last Release compatible with 10.11.3 (this version of os gives me best user experience)? Does release 4 work with 10.11.3?
  20. Dr Hurt, what settings are responsible for 1st phase of scrolling? Sometimes its super smooth and sometimes choppy without inertia. 10.11.6 with rushmore v3
  21. vanquybn, Could You pleas tell me what settings to change to make all 3 finger gestures working? Now I have only right and down swipes registered. Is it even possible with this kext? I can edit plist file but what to change? E7440 Rushmore v3. I know there is other kext by Dr Hurt but your version gives me the smoothest scrolling. Can You help me?
  22. Something is seriously wrong with Sierra on my setup. For the third time Sierra drive become corrupted beyond repair. I made shutdown after setting hibernatemode (previously booted normally) and next bood didn't happen. Not possible to repair drive with known tools. I give up for now. Clover usb is ready to action when Sierra leaves beta stage. Maybe 10.12.3 will be better. Most annoying thing is I can't pinpoint what happens to this drive and why. Is it the Liteon SSD not working with osx or Sierra beta problem. 10.11.3 on Intel 520 SSD works like a charm.
  23. Jake Lo, I have issue with sleep. Sometimes when I put my Dell to sleep, the screen goes black, fan is working and can't do anything without hard reboot. Next 10 times is ok and then again. Where to search? Darkwake=0 didn't help
  24. I removed layout id from clover config and everything worked. Now my Sierra 10.12.1 PB4 if 100% working. Thank you Jake Lo and Herve
  25. Herve, I am stupid now. Everything is as it should be. Clover patches are in place, DSDT has HDAU with _DSM method and it doesn't work. Could you please look at my config.plist? Maybe I can't see something. config.plist.zip
×
×
  • Create New...