rufabf

With clover i can't get boot to Windows but you can boot from usb with Chameleon

Check in BIOS that VRAM is 64mb

I don't know but i hope DInesh help you You have to select the efi partition, the partition that installed ML NO!

Yes i have a External HDD USB 3.0 and work fine and xhci in bios now is enable. this kext: http://www.osx86.net/view/3745-genericusbxhci_usb_3.0.html

Update!! (USB 3.0 work)

If you don't use patched DSDT i think that you put this string on config.plist to enable HD4000 <key>device-properties</key> <string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000005006201140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string> To format EFS use the EFI Tools Clover EN.app (F option)

Yes, all days, i only use Windows to play games

VGA not work fine but you can use HDMI to connect an external monitor like i do. For now the only solution to have wifi is change the wifi pci card. You can use all HDD or a single partition to install Mac osx. I have 3 partitions.

i've sent this files to Dinesh, he told me about EDP I don't have Extra folder i use clover

Do you have the same specifications? if you are not got the same probably not work or not work fine

For help and support, see the Help topic. No support in this thread. This is a guide to install MacOS on a Asus K55VM Specifications: Processor : Intel Core i7-3610QM Processor (6M Cache, 2.30 GHz) Graphics Processor(GPU) : Intel HD 4000 and NVIDIA Optimus GeForce GT 630M Chipset : Intel HM76 Express Chipset Hard disk : Hitachi 500GB 5400rpm HDD RAM : 8GB DDR3 1600 MHz SDRAM Wifi : Atheros AR9485 Wireless Network Adapter LAN : Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter Audio : Realtek High Definition Audio ALC270 USB 3.0 : Intel Panther Point PCH - USB 3.0 xHCI Controller Touchpad : Elantech Touchpad v4 Hardware Webcam : USB2.0 UVC HD WebCam Card reader : Realtek RTS5289 PCI-E Card Reader Monitor : AU Optronics B156XW02 V6 WXGA 15.6 16:9 HD 1366x768 Optical Drive : HL-DT-ST DVDRAM GT51N SCSI CdRom Battery : 6Cells 4700 mAh 50 Whrs Interface : 1 x Microphone-in jack 1 x Headphone-out jack 1 x VGA port/Mini D-sub 15-pin for external monitor 2 x USB 3.0 port(s) 1 x USB 2.0 port(s) 1 x RJ45 LAN Jack for LAN insert 1 x HDMI Working: Graphics with QE/CI on Intel HD4000 GPU Audio with AppleHDA LAN USB2.0 and USB3.0 Webcam Optical Drive HDMI Battery Elantech Touchpad Sleep, Processor P&C-States with Native power management Fn Hotkeys Not working: Atheros AR9485 Wireless Network Adapter (need to replace with supported card) NVIDIA® Optimus GeForce® GT 630M Realtek RTS5289 PCI-E Card Reader Unknown: None Issues: VGA work but not good For Installation: (Standard) Follow the Steps in the link below, starting with Pre installation, Installation and Post Installation: http://www.osxlatitude.com/edp/documentation/ Changes: Wifi : Original Ralink RT5390 not work (Replaced by: Atheros Ar5bhb92-h)) Optical Drive : Not Present (Replaced by SSD Crucial 128GB) Custom Guide: What do you need: - A USB, one with >8gb - OS X High Sierra 10.13 bootable USB (search in google) - Files attached on this post How to prepare USBs: 1- Download this OS X bootable USB 2- Install RAW image on your usb (Mac OSX) Or use rawtousb program for windows Open the terminal: Find your USB stick - diskutil list Unmount USB - diskutil unmountDisk /dev/disk2 Copy RAW Image - sudo dd if=[drag and drop the raw file in terminal] of=/dev/rdisk2 bs=1m Wait to finish and now you have a usb install ready to copy kext and clover 3- Download the file attached, extract and open the Clover Configurator.app 4- Mount your EFI USB partition without format and then copy EFI folder of Clover EFI into 5- Copy Apps folder into your usb install So now you have a full USB Install for this Asus How to install Mac OSX in your notebook: 1- Boot installation from USB 2- Format HDD on GPT 3- Select Partition to install and finish installation 4- Now we have Mac OS installed 5- Open the Clover Configurator.app 6- Mount your EFI HDD partition and then copy EFI folder into 7- Then go into BIOS, in Boot menu select "Add New Boot Option" and complete: Add boot option: (put a name) for example: Clover boot Select Filesystem: (Select HDD that have Mac OSX Installed) Path for boot option: \EFI\CLOVER\CLOVERX64.efi Select Create and put the new boot option first. Check too the VRAM of HD4000 is 64MB because probably if it's changed not work Save changes and reboot 8- So, now when system boot show Clover bootloader and just select the Mac OSX partition and press enter If you did it all Mac boot you did well Copy HWMonitor.app into Applications folder if you want see temperatures and frequency and enjoy your Hackintosh!!! If you have other problems ask me Updates: EFI CLOVER ASUS K55VM HIGH SIERRA 27-09-17.zip The last update

I send my files my laptop is asus k55vm with i7 3610qm 8gb ram and geforce 630m