tom032792 Posted November 20, 2017 Author Share Posted November 20, 2017 I'll do that when I get home tonight and see what happens. AFAIK I did. I copied it over from a fresh 10.13 VM that i used to try to create install media before I finally got access to a real mac to do it with. Unless that caused an issue somehow, it should be as vanilla as they come. EDIT: that vm was on 10.13 and my laptop is on 10.13.1. I'm updating the VM and I'll move that file over as well and try again. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 20, 2017 Administrators Share Posted November 20, 2017 do not forget to set the correct permissions on the kext after transferring it over to S/L/E if not it will not load Link to comment Share on other sites More sharing options...
tom032792 Posted November 21, 2017 Author Share Posted November 21, 2017 Still no sound with layout-id 18, and still no audio after sleep with layout-id 11. I tried getting the log again, but there's still no output from terminal when I run that command. Here is the output of kextcache again. kextcache output.rtf Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2017 Moderators Share Posted November 21, 2017 What kexts do you have in /EFI/Clover/kexts/Other? Wondering if you have duplicate kexts I see the AppleHDA is no longer appearing, so that looks like it's fix. Let's try to keep this clean by moving all the custom kexts to only /L/E and not both /L/E and /S/L/E Remember to repair permission and rebuild cache again after this is done IntelMausiEthernet.kext BrcmPatchRAM2.kext BrcmFirmwareRepo.kext VoodooPS2Controller.kext Link to comment Share on other sites More sharing options...
tom032792 Posted November 21, 2017 Author Share Posted November 21, 2017 Weirdly enough (at least to me) moving those over seems to have fixed the issue. I now have audio after sleeping, though I only let it sleep for a few minutes, but that was enough to break it before so I assume it's fixed now. I still don't get any audio with layout-id = 18, and I think the speaker quality was slightly better that way, but I'm not really going to worry too much about it at this point, I'm just glad to have functional audio. Only things I would like to figure out are: 1) random freezes after boot/when using final cut pro 10.3.4. Not sure if any of you use this or have had issues, but it seems to be acting up for me. In either of these cases, the mouse doesn't freeze, but the entire rest of the UI locks up and I have to hard restart the computer to be able to use it again. I've let it sit for a half hour or so and it still never comes back. 2) Brightness controls: They work now, but "max" brightness is about halfway up the scale and then it randomly changes brightness or maybe cycles through about half the steps again for the second half of the brightness slider. Other than that, everything seems to be working well. Thank you guys so much, I couldn't have done it without you. The complete list of all my Kexts in /L/E is as follows: ACPIBatteryManager ACS6x AppleALC AppleBacklightInjector ArcMSR ATTOCelerityFC8 ATTOExpressSASHBA2 ATTOExpressSASRAID2 BrcmFirmwareRepo BrcmPatchRAM2 CalDigitHDProDrv EAPDFix FakePCIID_Broadcom_WiFi FakePCIID FakeSMC HighpointIOP.kext HightPointRR IntelMausiEthernet Lilu PromiseSTEX SoftRAID VoodooPS2Controller WhateverGreen Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2017 Moderators Share Posted November 21, 2017 which version of AppleALC.kext do you have? Layout-id 18 only works on v1.2.2 by vaughn. I can't confirm it actually works since I don't have hardware to test. Could be cache was not done previously and v1.2.0 was still running... is there another version somewhere else in /E/C/kexts/Other? Does the freeze occur if FinalCut was not running? Post current Clover folder for review Link to comment Share on other sites More sharing options...
tom032792 Posted November 21, 2017 Author Share Posted November 21, 2017 1.2.2 is what exists in /L/E. Strangely, after letting the computer sleep overnight, there was no audio on resume either. There's no other instance of AppleALC in the Clover folder or in /S/L/E. My USB mouse also quit working after sleep, but a reboot fixed it? I think there might be an issue somewhere with resuming from sleep in general and my battery status also doesn't change after resume. I unplugged the laptop but it still says plugged in. There are two separate times it freezes. One is once every second or third boot it hangs up probably 30 seconds to a minute after entering my password and going into the desktop. Everything stops responding other than the cursor. I can make it freeze pretty much on demand by opening final cut and clicking around some video footage and having it play it back to me. The 4-5th click or so it seems like is when it freezes up to where again, the only thing on the system that responds is the cursor. Attached is my clover folder. CLOVER.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2017 Moderators Share Posted November 21, 2017 add this to boot arguments, under Custom flags to fix the battery update status abm_firstpolldelay=16000 Check now if log is showing EAPDFix in terminal log show --style syslog | grep EAPDFix Link to comment Share on other sites More sharing options...
tom032792 Posted November 21, 2017 Author Share Posted November 21, 2017 I added that and at least after a brief sleep the battery status is still updating correctly. When I run that command, I still get a blank screen, but I put the laptop to sleep and woke it up with the terminal open this is what was in the terminal upon login. EAPDFix Log.rtf Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2017 Moderators Share Posted November 21, 2017 Showing can't find HDEF for some reason. Try using AppleALC v1.2.0 instead or v1.2.1 2017-11-21 13:48:39.221429-0500 localhost kernel[0]: (EAPDFix) EAPDFix v2.3.5 Copyright © EMlyDinEsH 2013-2016. 2017-11-21 13:48:39.221434-0500 localhost kernel[0]: (EAPDFix) EAPDFix: OS X version 10.13.2 2017-11-21 13:48:39.221445-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Failed to find Audio device HDEF. 2017-11-21 13:48:39.728039-0500 localhost kernel[0]: (EAPDFix) EAPDFix v2.3.5 Copyright © EMlyDinEsH 2013-2016. 2017-11-21 13:48:39.728046-0500 localhost kernel[0]: (EAPDFix) EAPDFix: OS X version 10.13.2 2017-11-21 13:48:39.738725-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Using Fix type 3, will do background status check to enable Jack sense and EAPD when its disabled 2017-11-21 13:48:40.081648-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Internal Mic node 0x13, Capabalities 0x20, Config 0x90a60140 2017-11-21 13:48:40.115351-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Speaker node 0x14, Capabalities 0x10010, Config 0x90170110 2017-11-21 13:48:40.115358-0500 localhost kernel[0]: (EAPDFix) EAPDFix: EAPD Capabale for output node 0x14 2017-11-21 13:48:40.149092-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Headphone node 0x15, Capabalities 0x1001c, Config 0x221401f 2017-11-21 13:48:40.149099-0500 localhost kernel[0]: (EAPDFix) EAPDFix: EAPD Capabale for output node 0x15 2017-11-21 13:48:40.181929-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Headphone node 0x16, Capabalities 0x1001c, Config 0x21014020 2017-11-21 13:48:40.181935-0500 localhost kernel[0]: (EAPDFix) EAPDFix: EAPD Capabale for output node 0x16 2017-11-21 13:48:40.260649-0500 localhost kernel[0]: (EAPDFix) EAPDFix: External Mic node 0x19, Capabalities 0x24, Config 0x21a19030 2017-11-21 13:48:40.470023-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Speakers has EAPD, Headphones has EAPD, Desktop Codec No 2017-11-21 13:48:49.332834-0500 localhost kernel[0]: (EAPDFix) EAPDFix: Background pro cessing enabled at boot Link to comment Share on other sites More sharing options...
Recommended Posts