Jump to content

[HELP] 7710 Post Install Issue


tom032792

Recommended Posts

I'll do that when I get home tonight and see what happens.

 

AFAIK I did. I copied it over from a fresh 10.13 VM that i used to try to create install media before I finally got access to a real mac to do it with. Unless that caused an issue somehow, it should be as vanilla as they come.

 

EDIT: that vm was on 10.13 and my laptop is on 10.13.1. I'm updating the VM and I'll move that file over as well and try again.

Link to comment
Share on other sites

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

  • Moderators

What kexts do you have in /EFI/Clover/kexts/Other?

Wondering if you have duplicate kexts

 

I see the AppleHDA is no longer appearing, so that looks like it's fix.

Let's try to keep this clean by moving all the custom kexts to only /L/E and not both /L/E and /S/L/E

Remember to repair permission and rebuild cache again after this is done

IntelMausiEthernet.kext

BrcmPatchRAM2.kext

BrcmFirmwareRepo.kext

VoodooPS2Controller.kext

Link to comment
Share on other sites

Weirdly enough (at least to me) moving those over seems to have fixed the issue. I now have audio after sleeping, though I only let it sleep for a few minutes, but that was enough to break it before so I assume it's fixed now. I still don't get any audio with layout-id = 18, and I think the speaker quality was slightly better that way, but I'm not really going to worry too much about it at this point, I'm just glad to have functional audio. 

 

Only things I would like to figure out are: 

 

1) random freezes after boot/when using final cut pro 10.3.4. Not sure if any of you use this or have had issues, but it seems to be acting up for me. In either of these cases, the mouse doesn't freeze, but the entire rest of the UI locks up and I have to hard restart the computer to be able to use it again. I've let it sit for a half hour or so and it still never comes back. 

 

2) Brightness controls: They work now, but "max" brightness is about halfway up the scale and then it randomly changes brightness or maybe cycles through about half the steps again for the second half of the brightness slider. 

 

 

Other than that, everything seems to be working well. Thank you guys so much, I couldn't have done it without you. The complete list of all my Kexts in /L/E is as follows: 

 

ACPIBatteryManager

ACS6x

AppleALC

AppleBacklightInjector

ArcMSR

ATTOCelerityFC8

ATTOExpressSASHBA2

ATTOExpressSASRAID2

BrcmFirmwareRepo

BrcmPatchRAM2

CalDigitHDProDrv

EAPDFix

FakePCIID_Broadcom_WiFi

FakePCIID

FakeSMC

HighpointIOP.kext

HightPointRR

IntelMausiEthernet

Lilu

PromiseSTEX

SoftRAID

VoodooPS2Controller

WhateverGreen

Link to comment
Share on other sites

  • Moderators

which version of AppleALC.kext do you have?

Layout-id 18 only works on v1.2.2 by vaughn. I can't confirm it actually works since I don't have hardware to test.

Could be cache was not done previously and v1.2.0 was still running...

is there another version somewhere else in /E/C/kexts/Other?

 

Does the freeze occur if FinalCut was not running?

Post current Clover folder for review

Link to comment
Share on other sites

1.2.2 is what exists in /L/E. Strangely, after letting the computer sleep overnight, there was no audio on resume either. There's no other instance of AppleALC in the Clover folder or in /S/L/E. My USB mouse also quit working after sleep, but a reboot fixed it? I think there might be an issue somewhere with resuming from sleep in general and my battery status also doesn't change after resume. I unplugged the laptop but it still says plugged in.

 

There are two separate times it freezes. One is once every second or third boot it hangs up probably 30 seconds to a minute after entering my password and going into the desktop. Everything stops responding other than the cursor. I can make it freeze pretty much on demand by opening final cut and clicking around some video footage and having it play it back to me. The 4-5th click or so it seems like is when it freezes up to where again, the only thing on the system that responds is the cursor. 

Attached is my clover folder. 

CLOVER.zip

Link to comment
Share on other sites

  • Moderators

Showing can't find HDEF for some reason.  Try using AppleALC v1.2.0 instead or v1.2.1

 

2017-11-21 13:48:39.221429-0500  localhost kernel[0]: (EAPDFix) EAPDFix v2.3.5 Copyright © EMlyDinEsH 2013-2016.

2017-11-21 13:48:39.221434-0500  localhost kernel[0]: (EAPDFix) EAPDFix: OS X version 10.13.2

2017-11-21 13:48:39.221445-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Failed to find Audio device HDEF.

2017-11-21 13:48:39.728039-0500  localhost kernel[0]: (EAPDFix) EAPDFix v2.3.5 Copyright © EMlyDinEsH 2013-2016.

2017-11-21 13:48:39.728046-0500  localhost kernel[0]: (EAPDFix) EAPDFix: OS X version 10.13.2

2017-11-21 13:48:39.738725-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Using Fix type 3, will do background status check to enable Jack sense and EAPD when its disabled

2017-11-21 13:48:40.081648-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Internal Mic node 0x13, Capabalities 0x20, Config 0x90a60140

2017-11-21 13:48:40.115351-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Speaker node 0x14, Capabalities 0x10010, Config 0x90170110

2017-11-21 13:48:40.115358-0500  localhost kernel[0]: (EAPDFix) EAPDFix: EAPD Capabale for output node 0x14

2017-11-21 13:48:40.149092-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Headphone node 0x15, Capabalities 0x1001c, Config 0x221401f

2017-11-21 13:48:40.149099-0500  localhost kernel[0]: (EAPDFix) EAPDFix: EAPD Capabale for output node 0x15

2017-11-21 13:48:40.181929-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Headphone node 0x16, Capabalities 0x1001c, Config 0x21014020

2017-11-21 13:48:40.181935-0500  localhost kernel[0]: (EAPDFix) EAPDFix: EAPD Capabale for output node 0x16

2017-11-21 13:48:40.260649-0500  localhost kernel[0]: (EAPDFix) EAPDFix: External Mic node 0x19, Capabalities 0x24, Config 0x21a19030

2017-11-21 13:48:40.470023-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Speakers has EAPD, Headphones has EAPD, Desktop Codec No

2017-11-21 13:48:49.332834-0500  localhost kernel[0]: (EAPDFix) EAPDFix: Background pro

cessing enabled at boot

Link to comment
Share on other sites


×
×
  • Create New...