Moderators Jake Lo Posted April 7, 2018 Moderators Share Posted April 7, 2018 Strange in the screenshot, HDMI audio shows as IvyBridge. You could also try adding a supported dGPU. Give this Config a try. config.plist.zip Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 7, 2018 Administrators Share Posted April 7, 2018 yes I have a 9010 with the four usb slots on the front with dvdrom and a 3770 ivy core but I do not use the dgpu at the moment. it was for a multi monitor setup that I long sold off. my 9010 originally came with hd2500 graphics which is why I upgraded to 3770 ivy with the hd4000 graphics Link to comment Share on other sites More sharing options...
gtown Posted April 8, 2018 Author Share Posted April 8, 2018 11 hours ago, Jake Lo said: Strange in the screenshot, HDMI audio shows as IvyBridge. You could also try adding a supported dGPU. Give this Config a try. config.plist.zip Same problem. No acceleration, 4MB gfx RAM. Probably due to SandyBridge on 7 series board. I ordered a i5-3475s (HD4000). I read somebody else had success with it and HS. The i7-3770 is twice the price. So we'll see. Thanks. Bronxtech - I might hit you up if I get stuck with the HD4000. Hopefully it will just work Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 8, 2018 Administrators Share Posted April 8, 2018 What are your current SandyBridge settings? Fake iGPU id 0x01268086? Inject Intel? ig-platform-id xxxxxxxx? SMBIOS macmini5,1 ? You ought to choose one of the following HD3000 layouts in Clover, unless you inject this through DSDT of course: Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 9, 2018 Moderators Share Posted April 9, 2018 On 4/7/2018 at 11:00 PM, gtown said: Same problem. No acceleration, 4MB gfx RAM. Probably due to SandyBridge on 7 series board... Delete System DSDT.aml from /EFI/Clover/ACPI/Patched Link to comment Share on other sites More sharing options...
gtown Posted April 9, 2018 Author Share Posted April 9, 2018 Tried this. Same result. Also, the only DSDT patch is "Windows 2009" to "Darwin" to get USB3 working properly. Link to comment Share on other sites More sharing options...
gtown Posted April 9, 2018 Author Share Posted April 9, 2018 CLOVER.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 9, 2018 Administrators Share Posted April 9, 2018 A few comments: your Clover config fakes HD3000 iGPU id 0x01268086 but does not inject any HD3000 ig-layout-id. Your patched "System DSDT" does not either (and you load that table through Clover). why do you select "Load VBios" and "Patch VBios" in your Clover->Graphics settings? I don't think you'll manage to get graphics acceleration that way... If you look at the IOReg of a Mac Mini5,1 as availabe through the link posted here, you'll see that it's HD3000 iGPU@2 carries id 0x01268086 (which you've got covered) and uses snb-platform-id 0x10000300 (which you've not covered). -> inject ig-layout-id 03000010 in your Clover config. Link to comment Share on other sites More sharing options...
gtown Posted April 9, 2018 Author Share Posted April 9, 2018 Herve - This is at it's "current state". I have tried many other configs. Without Load / Patch VBIOS. With different ig-layout-id's. What do you suggest? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 9, 2018 Administrators Share Posted April 9, 2018 I guess you need to inject the SNB platform id as suggested in my previous answer. But you can also try the following settings as mentioned here at IM: fake iGPU is 0x01168086 inject snb-platform-id 0x00010000 use SMBIOS iMac13,1 (you may also try iMac12,1 or iMac12,2) Link to comment Share on other sites More sharing options...
Recommended Posts