JohnnyBoi_7 Posted December 19, 2018 Share Posted December 19, 2018 Hi There, i require some help getting into the Mac OS Initial Setup. The bootable usb was made from here : https://internet-install.gitbook.io/macos-internet-install/ After i select boot from Mac OS it suffers a Kernel Error Later on, i have also attached a picture of this Boot mode is set to EUFI and drive set to AHCI Laptop Specifications Dell Inspiron 5558 i5-5250U 8GB RAM 120GB SSD Intel HD Graphics 6000 I have also attached the EFI file Please do know i unfortunately do not have access to a Mac.. Clover.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 19, 2018 Moderators Share Posted December 19, 2018 The DSDT/SSDT in your ACPI/Patched folder shows Haswell, but your Config shows Broadwell. Where did you get these files combo? The KP refers to your graphics card. I see your Config has the DVMT Preallocation patch so it's probably caching issue. Boot with FakeID for IntelGfx. Once installation is done, rebuild cache. That should fix the issue. At Clover, go to the Option menu. Look for graphics section, go down to FakeID and change it to 0x12345678 Link to comment Share on other sites More sharing options...
Administrators Hervé Posted December 19, 2018 Administrators Share Posted December 19, 2018 Intel i5-5250U CPU is Broadwell generation and integrates Intel HD 6000 graphics indeed. As such, I was quite surprised to see a reference to Haswell graphics Azul framebuffer kext in your posted KP. Obviously, something must be wrong on your configuration... Looking at your Clover configuration, I could see: Devices section: injection of some ATI + nVidia properties as well as quite a lot of properties for audio, HDMI audio and Intel graphics properties Graphics section: Inject ATI + Inject nVidia enabled SMBIOS section: incomplete MPB12,1 entry I'd say your issues come from those device properties you chose to inject, knowing that: you should not inject any ATI and nVidia properties if you intend to run on HD6000 graphics you should not enable any ATI and nVidia injection in your Graphics section if you load latest lilu + WEG kexts which seems to be the case Did you come up with this particular config by yourself or did you just get it from somewhere without knowing what it does? Link to comment Share on other sites More sharing options...
JohnnyBoi_7 Posted December 19, 2018 Author Share Posted December 19, 2018 i was browsing through the forums looking for a fix so i had used a few configs (desperate) i did however come across this one of yours : https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?tab=comments#comment-54632 and downloaded the correct files. How can i rebuild the cache ? i have also attached my current files. Clover.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted December 19, 2018 Administrators Share Posted December 19, 2018 8 minutes ago, JohnnyBoi_7 said: [...] How can i rebuild the cache ? [...] Did you check our FAQ section? Link to comment Share on other sites More sharing options...
JohnnyBoi_7 Posted December 19, 2018 Author Share Posted December 19, 2018 i did see now, i unfortunately am not able to get into the terminal to run the command Is there maybe an alternate way i'm missing ? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted December 19, 2018 Administrators Share Posted December 19, 2018 Single-user mode, if you manage to partially boot the system that way... Link to comment Share on other sites More sharing options...
JohnnyBoi_7 Posted December 19, 2018 Author Share Posted December 19, 2018 Have tried, no luck, is there a different config i could try as my unit only has HD6000 and no dedicated 920M ? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 20, 2018 Moderators Share Posted December 20, 2018 Try this, files goes into /EFI/Clover replacing them 5558_HD5500_Only.zip Link to comment Share on other sites More sharing options...
JohnnyBoi_7 Posted December 20, 2018 Author Share Posted December 20, 2018 Worked perfect ! I am in the installer, clearing the kext cache at the moment. Will install on HDD after and return if something pops up Thank you Link to comment Share on other sites More sharing options...
Recommended Posts