adarsh100 Posted May 25, 2019 Share Posted May 25, 2019 I used USBINJECTALL.KEXT and got this in hackintool. Do I only add the usbports.kext which was generated by deleting non active ports in the list and specifying what type of port they are to cloevr kext folder? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 25, 2019 Moderators Share Posted May 25, 2019 Yes, make sure you plug in each port with USB2.0 and USB3.0 devices, then remove the non active ports. Then save as a kext or export as an SSDT-xxx.aml and use with USBInjectAll.kext From the above, it looks like your touchscreen is an USB device. If it doesn't work OOB, then you'll probably need to use an app like touch-base. Link to comment Share on other sites More sharing options...
tinDell Posted June 9, 2019 Share Posted June 9, 2019 I had this problem using E5450 Sierra bootpack (A15). Should I use E7450 bootpack? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 9, 2019 Moderators Share Posted June 9, 2019 boot with arg. Once installed, repair permission and rebuild cache. Then you should be able to boot normally -igfxvesa Link to comment Share on other sites More sharing options...
tinDell Posted June 9, 2019 Share Posted June 9, 2019 Thanks for your help. After installed, I met another problem that I cannot install clover bootloader. It said installation failed. What should I do? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 9, 2019 Moderators Share Posted June 9, 2019 Did you format drive as GPT prior to installation? What error are you encountering? Which version of Clover are you installing? Did you disable security? sudo spctl --master-disable Please post screenshot of error. Link to comment Share on other sites More sharing options...
tinDell Posted June 10, 2019 Share Posted June 10, 2019 Did you format drive as GPT prior to installation? Yes, I did What error are you encountering? It just said installation failed Which version of Clover are you installing? I was using the latest, v2.4k_r4945 Did you disable security? Yes I did this sudo spctl --master-disable Please post screenshot of error. I think I made mistakes, after clover failed I try to replace bootpack in efi partition with e5450 bootpack, from here: The result is sierra cannot boot after restart. So I can't screenshot the error. Also, I cannot generate ssdt.aml because my processor was not recognized. But, since it said it was not mandatory I am not worry too much The bigger problem, I also lost windows efi (it not shown in clover) & I don't have the recovery media Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 10, 2019 Moderators Share Posted June 10, 2019 Add NTFS.efi to /EFI/Clover/drivers64UEFI for Windows You'll need to increase the EFI partition for dual booting then install Clover and replace files with this into /EFI/Clover Link to comment Share on other sites More sharing options...
tinDell Posted June 10, 2019 Share Posted June 10, 2019 I will try to access with verbose mode. Last time I tried, I still had problem with clover installation. I can open the .pkg, change install location & customize install, click install, writing files and ended with installation failed. Link to comment Share on other sites More sharing options...
tinDell Posted June 10, 2019 Share Posted June 10, 2019 Not yet succeed. When I try to reinstall Sierra, -igfxvesa arg no longer working. Link to comment Share on other sites More sharing options...
Recommended Posts