npyadav1 Posted October 23, 2019 Share Posted October 23, 2019 Hello After I successfully installed Mac OS X Catalina on my laptop, when my laptop was rebooted, it stuck on the Apple logo with empty progress bar (waiting aprox 2 hrs ) and it is not running. Please help me to solve this issue. Thanks Please check my laptop booting video link: https://drive.google.com/file/d/1H8msw1rynuvkyete9MgeYE3ZqvQkNS68/view My EFI Folder zipEFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 23, 2019 Moderators Share Posted October 23, 2019 Check your BIOS, Optimus might be disabled. For some reason it kept resetting after each reboot. If I remember correctly, the last version that retain BIOS settings for E6530 is A13. If that's the case, you'll have to downgrade your BIOS if you have a new version than A13 Hmm, AppleRTC is not enabled on your Config file. Link to comment Share on other sites More sharing options...
npyadav1 Posted October 24, 2019 Author Share Posted October 24, 2019 Thanks for the help, @Jake Lo My laptop Bios version is A12 and is also enable optimus option in Boise settings. So I enable AppleRTC option in my config file and then check that it is working or not. Link to comment Share on other sites More sharing options...
npyadav1 Posted October 24, 2019 Author Share Posted October 24, 2019 The issue did not get fixed even after I enable AppleRTC option in my config file. And I also checked the my config file of my old Mac 10.14.4, but again the same issue is coming up, can someone help me to fix this. Thanks Please check My EFI folder with new config file. Also check attach images. EFI 2.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 24, 2019 Administrators Share Posted October 24, 2019 Again, I'm not seeing any ACPI folder in your Clover EFI. Was that a mistake when posting your folder or is it really missing from your hack? It could be a problem since your Clover config seeks to load DSDT + SSDT + SSDT-PNLF... You would also need the SSDt that disables the nVidia dGPU. One you clarify and possible sort that out, try out the following Clover config + kexts set: config.plist.zip kexts.zip I don't know where you got your EFI folder from but you should clearly use the Clover packs we posted here at OSXL for those E6x30 models. See the Guides section... Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 24, 2019 Administrators Share Posted October 24, 2019 there was a bug reported with the clover installer not making the ACPI folder you might need to download another clover current installer. or manually add it in the proper location Link to comment Share on other sites More sharing options...
npyadav1 Posted October 25, 2019 Author Share Posted October 25, 2019 @Hervé @Bronxteck Thanks for help. I have added the ACPI folder with DSDT + SSDT + SSDT-PNLF ... files, but the same issue is coming up again and also added above config, kexts in this EFI folder. EFI folder added :- EFI.zip Link to comment Share on other sites More sharing options...
npyadav1 Posted October 28, 2019 Author Share Posted October 28, 2019 I have successfully install mac osx 10.15 in may laptop. Single tap, Double tab trackpad "audio" or "Wifi card" (DW1520 BCM4322 Dell) not working. Please help me. I used following kexts but not working 1. EFI>clover>kexts>other>VoodooPS2Controller.kext.zip 2. L/E AppleHDA_IDT.kext.zip , Archive.zip(For Wifi) Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 28, 2019 Administrators Share Posted October 28, 2019 TouchPad will work if you've setup your USB ports properly and installed DrHurt's VoodooPS2Controller R6 SingleTap is not enabled by default; you'll have to enable those features once you've got your TouchPad properly enabled as per 1) AppleHDA_IDT kext is now obsolete and was used in conjunction with patched AppleHDA. Use Lilu + AppleALC with the relevant layout-id. I provided you with all the necessary kexts in my post above, it'd please me if you'd use them... Link to comment Share on other sites More sharing options...
npyadav1 Posted October 29, 2019 Author Share Posted October 29, 2019 Thanks @Hervé Can you help me to fix these issues? Please tell me what you need to do to fix these issues. I have used all kexts provided by you. Please check attached zip Kexts+Config.zip Link to comment Share on other sites More sharing options...
Recommended Posts