Administrators Hervé Posted March 18, 2020 Administrators Share Posted March 18, 2020 Re: headphone output, cache CodecCommander kext from /L/E. Link to comment Share on other sites More sharing options...
JmW Posted March 19, 2020 Author Share Posted March 19, 2020 Hi @Hervé, thank you for the help, I tried the kext you mentioned however it didn't worked out. I hear a voice when headphone is inserted in the jack but then no sound output. Please help. Settings show headphones as output but no sound. Also, when I click on speaker icon, it only shows one sound bar. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 19, 2020 Moderators Share Posted March 19, 2020 Change layout-id 13 to 77 Link to comment Share on other sites More sharing options...
JmW Posted March 20, 2020 Author Share Posted March 20, 2020 Hi @Jake Lo Thank you for the reply, I opened my config.plist and by default 'no' was selected in the devices-> audio -> inject. I entered the value you mentioned but didn't worked. I also selected detect but it didn't worked out as well. Please help. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted March 20, 2020 Administrators Share Posted March 20, 2020 Refer to AppleALC documentation (wiki) and experiment with the various layouts that are listed for your codec. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 20, 2020 Moderators Share Posted March 20, 2020 @JmW Leave the value no as is. Change the layout-id under Devices/Properties/PciRoot(0x0)/Pci(0x1f,0x03) Link to comment Share on other sites More sharing options...
JmW Posted March 20, 2020 Author Share Posted March 20, 2020 Hi @Jake Lo Thank you for the reply, I changed the layout id from 13 to 77, it didn't worked out. Also, speaker output is gone now, no output device is present in the sound setting. Please help. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 20, 2020 Moderators Share Posted March 20, 2020 Switch back to 13 and confirm if your codec is ALC295 If yes, you can also try layout-id 3 and 15. Link to comment Share on other sites More sharing options...
JmW Posted March 20, 2020 Author Share Posted March 20, 2020 @Jake Lo Thank You so much!! It worked! I changed the layout id to 15. Thanks again for the ultimate support! I'll upload my final clover efi. Link to comment Share on other sites More sharing options...
JmW Posted March 21, 2020 Author Share Posted March 21, 2020 Hi @Jake Lo could you please help me running iMessage and FaceTime. It isn't working. Link to comment Share on other sites More sharing options...
Recommended Posts