Jump to content

sleeping just restart my computer


clockwork247
 Share

Recommended Posts

  • Administrators

Try re-applying the EDP kexts for your model. I experienced the same issue (D630 would go to sleep Ok but would do a hard reset with BIOS reset on wake attempt) until I re-applied the kexts.

Link to comment
Share on other sites

  • Administrators

I did not need to apply the D430 BIOS password procedure to get sleep to work on my D630. I "only" had to follow the model-specific kexts installation, followed by Hibernation fix. That was enough.

 

EDIT: I can close the lid or select Apple-> Suspend or press FN+ESC to put D630 to sleep. It'll wake when I open the lid or press the power button.

 

Without this step-by-step procedure, I could put the D630 to sleep Ok, but it would immediately shutdown and restart with complete BIOS reset to default at any wake request.

Link to comment
Share on other sites

I did not need to apply the D430 BIOS password procedure to get sleep to work on my D630. I "only" had to follow the model-specific kexts installation, followed by Hibernation fix. That was enough.

 

I can close the lid or select Apple-> Suspend to put D630 to sleep. It'll wake when I open the lid or press the power button -FN F2 not supported though, but that's trivial).

 

Without this step-by-step procedure, I could put the D630 to sleep Ok, but it would immediately shutdown and restart with complete BIOS reset to default at any wake request.

Hi Hervé, I have the same D630 model as you but I have never get sleep completely work although I tried many times, just no success. Could you please zip the Extra folder and let me download? There are many things could effect sleep I guess... Thanks a lot
Link to comment
Share on other sites

Dear elim,

 

Have you tried the dsdt.aml I posted here (last post):-

 

http://forum.osxlati...30/page__st__20

 

 

Make sure you do a fresh configuration for D630 with EDP 3.1 before that.

 

 

Cheers!

Dear Syonagar,

I updated bios to A18, installed myHack3.1 and EDP3.1, copied your dsdt to /Extra/Models/Dell_Latitude_D630-intel/common/ (replaced the 1280x800 one), edited the boot.plist for 1440x900, then rebuilt EDP... Not much progress on sleep: close the lid, it'll go sleep for a second and immediately go awake....

Link to comment
Share on other sites

 Share

×
×
  • Create New...