Jump to content

Latitude E7240


DLinkOZ

Recommended Posts

i got both files, and i placed the aml in extra

 

edit: removing old file, booting and runnig the script again ends in the same error...

somehow my system can't mount the efi partition..

 

i also tried to install chameleon again and runfix again but without luck..

Link to comment
Share on other sites

  • Moderators

Only easier way is to have someone do it for you.

Here, this is tuned to MBA 6.2, so make sure you're using SMBios set to MacBook Air 6.2

Replace it to /Extra/Extensions and reboot

 

If the fan is still going like mad, then turn down Transparency. It's a hogger.

  • Go to preference, Accessibility, check 'Reduce Transparency'.
  • Turn off Notifications you don't use
  • Remove Widgets you don't use.

 

FakeSMC.MBA-6.2.zip

  • Like 1
Link to comment
Share on other sites

i did it and it seems that I have much better fan control now...
please have a look if this is correct now.. its german btw...
 
Hardware-Ãœbersicht:
  Modellname: MacBook Air
  Modell-Identifizierung: MacBookAir6,2
  Prozessortyp: Intel Core i7
  Prozessorgeschwindigkeit: 2,69 GHz
  Anzahl der Prozessoren: 1
  Gesamtanzahl der Kerne: 2
  L2-Cache (pro Kern): 256 KB
  L3-Cache: 4 MB
  Speicher: 8 GB
  Boot-ROM-Version: MBA61.0099.B00
  SMC-Version (System): 2.13f9
  Beleuchtungsversion: 1.4a6
  Seriennummer (System): CK8xxxxx9XYL
  Hardware-UUID: 6B22B5B9-E9A1-59F5-A279-3D95D20D3CCB
 
 
ONE VERY LAST THING:
Is it possible to get a second-display running, which is connected through the dock-station??
I dont get any signal on the monitor when I connect the laptop to the dock, but the USB ports of the dockingstation works when the laptop is docked...
 
thx

Link to comment
Share on other sites

×
×
  • Create New...