rschultz101 Posted April 22, 2016 Author Share Posted April 22, 2016 sleep - wake , bluetooth was lost after wake from sleep - sleep , does some disk activity for 2-3 sec before actually going to sleep - think it should be instant Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted April 22, 2016 Administrators Share Posted April 22, 2016 nope its not instant takes the same amount of time on a real mac. i think snow leopard was the last os it was "instant" Link to comment Share on other sites More sharing options...
cryptorider Posted June 8, 2016 Share Posted June 8, 2016 Installed the 10.11.6 beta version and booted without any issue. Link to comment Share on other sites More sharing options...
edd1024 Posted August 26, 2016 Share Posted August 26, 2016 Got my E7450 up and running, few issues remain though: Plenty of early reboots. In many cases it works in some it take up to 10 resets to start Sleep/Wake is unstable; sometimes seems that instant wake is a problem I loose sound and trackpad after failed sleeps Plenty of these messages:No interval found for . Using 8000000 EAPDFix: Speakers EAPD is working. ACPIBatteryManager: WARNING! fCurrentCapacity > fMaxCapacity. adjusted fCurrentCapacity from 7200, to 7100 what is actually patched in the SSDT-7.dsl? I patched on my own at the beginning but some stuff didn't work so I wonder. I still cannot engage the 4G module... Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 27, 2016 Moderators Share Posted August 27, 2016 what is your system's specs? What version of bios is it running? Did you set BIOS to default and then change the settings according to the guide? There's no patch added to SSDT-7, but only fixes. It's required for SATA drives to be detected. Link to comment Share on other sites More sharing options...
edd1024 Posted August 28, 2016 Share Posted August 28, 2016 The system specs are the same as yours. BIOS is A13 and yes I followed the guide. Are you using only RehabMan's patches or anything else? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 28, 2016 Moderators Share Posted August 28, 2016 I have A10 in my guide, but I just updated to A12 just to see if I encounter any of the issue you listed...mainly the early reboots, no audio and trackpad. So far no issue, sleep and wake works just fine with the same bootpack. Updated to A13 is a different story, sleep is no longer working. Tried recreating cache to see if it makes a difference, sleep works but won't wake with LID open, have to tap the power button. I'm going to export new DSDT/SSDT and repatch them. Will upload when I'm done testing them. 1 Link to comment Share on other sites More sharing options...
edd1024 Posted August 28, 2016 Share Posted August 28, 2016 OK my mistake was not to use the complete Bootpack. I removed the old Clover directory completely now and used the bootpack from the scratch. Went into BIOS, loaded the defaults and changed one option to AHCI. I couldn't find the UEFI/CSM option anymore. It just gives you the option to support legacy boot which was deactivated. So I left that alone. The results? Sleep/wake same as yours with A13 other than that not a single issue. No early reboots, sleep/wake works for sound and keyboard/touchpad. Oh: pull the power jack than sleep will work automatically or by checking it in the Apple menu. And: I went back and shot the chowns and chmods as the guide is asking. So the simple truth is: follow the guide to the letter. Downgrading BIOS is possible, right? I mean if everything works with A12 as desired I'll consider downgrading to make everything work. What the heck... Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 29, 2016 Moderators Share Posted August 29, 2016 See new bootpack for BIOS version A13 Sleep won't work with E7450_Update, since it's build on version A10. Downgrading to A12 if fine too. 1 Link to comment Share on other sites More sharing options...
edd1024 Posted August 29, 2016 Share Posted August 29, 2016 I'll try it right now... Link to comment Share on other sites More sharing options...
Recommended Posts