Jake Lo

are you booting from the USB or from SSD? If SSD, did you already copy over the EFI folder from the USB? Have you tried booting from USB and then selecting the SSD to boot?

boot with verbose & debug 0x100 mode. support to prevent system from restarting on KP / Error

Had you tried plugging in second monitor after booting? I believe it's a known issue with HD530 /P530

Easier if you just attach the Config file for review...than screenshots

Post the Clover folder and Post IOReg

Try this. Replace the Config file and replace / not merge all the DSDT/SSDT into /EFI/Clover/ACPI/Patched Try booting with that E7270_NVME.zip

That is normal, it'll reboot a couple times before finalizing. post the KP

Check to see if all these are working: Full graphics Acceleration QE/CI Sleep / Wake PowerManagement Speaker / Headphone Audio HDMI / DP video / Audio Touchpad / Trackpad LAN / wireless iMessage Webcam I noticed your Nvidia card is not disabled to save battery, who patched the DSDT / SSDT for you?

For some reason the HDMI patch is not reflecting in the IOReg. Have you tried DP to minDP? Might get higher resolution than would on HDMI

run this in terminal and post the output log show --style syslog | fgrep "Wake reason"

Click on the link provided to download the app. Launch it with the HDMI monitor connected. Save the file, compress and attach it here

Post IOReg with the HDMI Connected

Make sure you have HFSplus.efi in /EFI/Clover/drivers64UEFI

KP = Kernel Panic should be able to upgrade directly to HS. Have your USB installer available for recovery incase of issue

what kexts did you copied to /L/E? and was the permission.sh ran successfully? can you boot with the USB installer and then select the newly installed drive?

the files I attached are for High Sierra ready, all files and config are up to date. Maybe generate a new serial when done so it'll be unique.

YEs

Here, replace the contents into /EFI/Clover E6440_A21.zip

Clear /EFI/Clover/ACPI/Origin Reboot to Clover, hit F4. Now compress and attach /EFI/Clover/ACPI/Origin here.

overwrite

Try this config and if it still fails, post the KP config.plist

if that doesn't work, try this In your config.plist, add "\System\Library\Extensions\IONVMeFamily.kext" in "Kernel and Kext Patches"->"ForceKextsToLoad".

I assume you can boot to Windows currently? Can you partition the drive from Windows, set the free space for OS X as NTFS and initialize it. Seems there's a bug in HS where non initialized drives are not detected in disk utility.

No unless you want to get rid of Windows. Did you format the free space for OS X?

https://www.insanelymac.com/forum/topic/311820-guide-mount-and-access-efi-partition-on-windows-10/