Jake Lo

Most likely related to what I had posted in post #10 DSDT/SSDT issue. Will wait for you IOReg to see

here you say boot normal...so I'm confused. Can you boot back to OS X?

??? Still no audio or can't boot?

you left out this sudo chmod -Rf 755 /L*/E* Try booting in Safemode and fix the permission again

I see you already have all the kexts and patches inplace. Looks like Bluetooth is working though. Most likely need new DSDT/SSDT patching. Boot to Clover, hit F4. Continue to OSX Compress and attach /EFI/Cover/ACPI/Origin I'll have them patched for you.

It would help if you had posted a screenshot E7270_touchscreen_1.18.5.zip

Replace DSDT/Config file Place kext into /L/E Repair permission and rebuild cache what's the issue with sleep not wake? on wake, it just stay blank screen? Could be an EDID issue...try this For HDMI, have the monitor plugged in, then explore the IOReg so to confirm the right port is enabled. SD Card reader is not supported at the moment. See here 5480_audio.zip

Generating SSDT.aml is for laptop only. Follow instructions from here to debug issue gen_debug -sysprofile

AppleHDA_ALC280.kext needs to go into /Library/Extensions Repair permission and rebuild cache sudo kextcache -i /

Follow instructions from here to debug issue gen_debug -sysprofile

Re export the IOReg and attach The previous IOReg has GFX0 and B0D3 showing which are not correct since it's already patched to IGPU and HDAU respectively. HECI is not rename to IMEI, there's no SD Card patch. This tells me that either your boot source is not what you have attached or you had booted without the DSDT/SSDT.

???? so you need help with 5480 or E6530? Had you tried the bootpack I just attached?

See here Search for "Swipe" for instruction to configure 3 fingers swipe

Yes, but not able to get the GPIO Pinning working. https://voodooi2c.github.io/#GPIO%20Pinning/GPIO%20Pinning The patching is a bit unclear to me at this point. I'm seeking black.dragon74 for assistance at the moment since he seems to be quite active there.

APFS? So you already have it installed? You'll need APFS.efi in /EFI/Clover/drivers64UEFI Give this a try. Replace contents into /EFI/Clover 5480_HD630_v1.8.2.zip

The attached IOReg file, is that while booting without DSDT/SSDT? I'm asking because if you're not, then your boot files must be from a different source. I noticed you have injected EDID, shouldn't need it. Disable it or remove it.

You still have Lilu.kext in /S/L/E, but no harm. I see you have BIOS A19, I assume that being the latest since I only have A18 on my system. Interesting, A18 no longer found in Dell download...guess I'll have to update it to A19 too. Try going into Options when you see the Clover loader, use the right arrow to navigate Select ACPI patching-> Tables Dropping-> Go all the way down and deselect Drop all OEM SSDT Check all the Drop "SSDT-xx" below that Select Return Change DSDT name: BIOS.aml or anything other than DSDT.aml Select Return, Return Hit spacebar to select Verbose mode + debug 0x100 mode What the above does is to not use the patched DSDT/SSDT if it's a BIOS dependent issue. If it boots with that setting, then we could try exporting new raw file and I'll repatch them for you. Empty /EFI/Clover/ACPI/Origin before rebooting to Clover, Hit F4. Compress and attach the Origin folder for patching. I also notice the debug folder does not have the IOREg file but a text file, hard to read through that. While running the debug script, do not do anything until it's finish. It suppose to download the IORegistryExplorer.app and extract the file. If it still fails, then try downloading this IORegistryExplorer_v2.1.zip save, compress and attach the file

You have duplicate kexts in /E/C/k/Other and /L/E. Only kexts you need in /L/E are in the folder /E/C/k/Other/LE So remove from /L/E : IntelGraphicsFixup, IntelGraphicsDVMFixup, Lilu, and ACPIBatteryManager Repair permission and rebuild cache after the removal of the above kexts Note: Don't need AppleHDA_ALC293, FakePCIID, and FakePCIID_Intel_HD_Graphics in /E/C/k/Other , can be removed as well Could be due to #1 No experience with WWAN, try to follow Hervé's advice I'm assuming you had installed in APFS format? In any case, you can disable it by going into the Config.plist and disable the TRIM patch under kextToPatch, save and reboot. Yes, that's normal if it sleeps with LID open. But if it sleep with LID close and you open it and still have to tap the power button, then no.

Follow instructions from here to debug issue gen_debug -sysprofile

Yes, you need to patch DSDT for trackpad to work. Look for Device PS2M, remove Method _STA, this will enable trackpad using VoodooPS2Controller 1.8.29 Issue is, after wake from sleep, it gets disabled for unknown reason. Until I2C is supported, this is temporary solution.

Ok, if the included AppleHDA_ALC256b.kext is not working, you could try a different kext. Remove AppleHDA_ALC256b.kext from /L/E Repair permission and rebuild cache Add to /EFi/Clover/kexts/Other AppleALC.kext (1.2.2) + Lilu.kext (1.2.2) In Config file, change Audio inject from 1 to 56 Under KextToPatch, disabled all the AppleHDA hotpatches. Reboot to test

Upgrade BIOS to the latest 1.8.2 Boot to Clover, hit F4. Compress and attach the Clover folder from the USB here

All solved??

You have a misspelling in the Config for SSDT-PNLF.aml You have it listed as SSDT-PLNF.aml Fix that and Brightness should work.

You might need to add AppleHDADisabler.kext too. Your screenshot shows no working audio. Do you have Windows? If so, run Dxdiag.exe and post txt file here