Jake Lo

Nope, as stated, bootpack is made for 10.12.4 and up. It has all necessary kexts.

Can you upload the whole Origin folder here and verify what version of BIOS?

try booting with the USB installer and dump it there.

Your Clover/ACPI/Patched folder is missing DSDT.aml along with the other SSDT. Re-extract the raw files to Origin (F4), attach it and I'll help you patch, seems to be missing a lot of patches. Also include the BIOS version and the system's specs for review.

It's meant for 10.12.4 and up. So if you decide to upgrade, make sure to remove IntelBacklight.kext.

Try this new bootpack for Sierra. Copy the kexts in /kexts/Other/LE to /Library/Extensions Run permission fix and rebuild cache sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

What's your system specs? What version of BIOS are you on? Can you boot to the Clover GUI, hit F4. Then continue onto OSX. Compress and attach the Clover folder here for review.

Looks like you're installing Sierra with ElCapitan bootpack. Easy fix, go into the Config.plist file and disable SecondStagePatch 10.11 NB: Boot to Clover GUI->Options Binaries patching-> Custom kexts patches-> Uncheck SecondStagePatch 10.11 Go back to main menu by hitting escape, escape, escape or return

If you have only 1 mem stick, make sure to move it to DIMM0

If you have HFSPlus.efi as mentioned above, you don't need to remove disabled VboxHFS.

does your Inspiron have an Alps touchpad or Synaptics? These kexts is made specifically for Alps.

If you have Intel Wifi, then it's not supported, will need to be replaced with a supported card, see my signature link below under Wireless Cards. For webcam, does it show under USB in system reports?

Try moving RAM from DIMM#2 to DIMM#0

The new Config and the one you used from ElCapitan are no different except for the SSDT order. Check /EFI/Clover/drivers64UEFI for HFSPlus.efi as Bronxtech suggested.

Have you tried different USB ports?

As I said above in post #5, running those commands will fix it. I have EmuVariableUefi-64.efi running perfectly fine.

Just run the permission fix and rebuild cache. No big deal. sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

You just select the Internal drive where OS X is installed. In your case, it' Machintosh SSD. It'll automatically update to the EFI partition.

You need to disable Secure Boot under security. What error are you encountering? Your Skylake system need to have DVMT set to 96MB or you could just try adding lilu.kext IntelGraphicsDVMTFixup.kext

AppleHDA_ALC293 is not caching. Run these again until you see it showing in the output sudo touch -f /L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

See my clover guide here Bootpack is in post #2 under Inspiron based on bios version A14. You'll need to set the DVMT as instructed in the Prerequisite here

that's a well known discussed topic many many times here. downgrade your BIOS to A03, then upgrade it to A12 and not higher.

No attachment or video found...

You have to patch all the SSDT without the xx after the numbers with GFX0->IGPU across the board. Not just the DSDT. SSDT-PNLF.aml goes hand and hand with AppleBacklightInjector.kext along with this hot patch by Rehabman for Brightness, it's a fix that 10.12.4 broke with IntelBacklight.kext and PNLF DSDT patch. <dict><key>Comment</key> <string>change F%uT%04x to F%uTxxxx for AppleBacklightInjector.kext (credit RehabMan)</string> <key>Disabled</key> <false/> <key>Find</key> <data> RiV1VCUwNHgA </data> <key>Name</key> <string>AppleBacklight</string> <key>Replace</key> <data> RiV1VHh4eHgA </data> </dict>

@flexrac, Do you mind giving this bootpack a try? It should disable your Nvidia card saving you some battery life. Let me know if sleep and other stuff are working as before.