Jake Lo

ok, try this one, enabled AddDTGP and FixAirport, see source Track preference should show if you're using dr. hurt's version 6 beta 6. Make sure version 6 beta 6, not version 6 RC6. config-E7440_Sierra.plist.zip

added a whitelist patch. not sure if it'll help config-E7440_Sierra.plist.zip

did you install latest FakePCIID? Rebuild cache https://bitbucket.org/RehabMan/os-x-brcmpatchram/downloads https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads * Installed latest version of FakePCIID.kext * Installed latest version of FacePCIID_Broadcom_WiFi.kext * Installed latest version of BrcmPatchRam2.kext * Installed latest version of BrcmFirmwareRepo.kext

volume keys are working now, and brightness keys as well I also added the wireless patch so no need to re-add

For Wireless, see post#1 & 2 here config-E7440_Sierra.plist.zip

post your config, i'll add the necessary changes

There are new required patches for audio and Wireless card BCM4352/bcm4352z. What wireless card do you have?

You can follow my Clover guide to create the installer and use attach files as bootpack. You'll need to set the DVMT, hopefully that option is available in your BIOS, otherwise, check my E7x70 guide under prerequisite to see how it's done. Update: /!\ New Development: If you don't want to mod the BIOS as it might be difficult for some models, you could skip this step by adding 2 new kexts to /EFI/Clover/kexts/Other Lilu.kext & IntelGraphicsDVMTFixup.kext El Capitan Haier-HD5300.zip Sierra Haier_HD5300_Sierra.zip High Sierra Haier_Y11b_HS.zip

if you're using Clover, then you only need the 1st kext, leaving the vanilla AppleHDA as is. Can be install to /L/E or /S/L/E Add those patch to Clover config if it's not already.

Generate a new SMBios since anyone using this bootpack has the same serial. Use latest Clover Configurator.

Right, you're on El Capitan. Sierra does not need that patch, therefore I disabled it.

Try replacing with these files to /EFI/Clover

attach your Origin folder, I'll patch the files for you. Please include your system specs: CPU GPU Discreted card? Alps or Synaptics touchpad

Check Display preference, does the brightness bar show? please attach IOREG

Did you use bootpack and fixed battery DSDT from here?

Install IntelBacklight and patch DSDT or Clover with PNLF method

make sure to follow steps 7. Copy kexts from /EFI/Clover/Kexts/Other/LE to /Library/Extensions of Macintosh SSD Note: Ignore warning/error messages and click OK, then run commands below. 8. Repair permission and rebuild cache. Run command from terminal sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

See my guide here Check prerequisite and Post Installation steps for sound, you'll need to use my boot pack

@mdub, your system has HD 530 whereas comi has HD520. Do either of your system have a discrete graphics card?

Will internal speakers and/or headphone come back when you remove the HDMI connection? There's nothing showing up under "Intel High Definition Audio" Behavior with the internal LCD going dark is strange which I'm not seeing on my Skylake systems.

AppleIntelFrameBufferAzul is for Haswell HD4600/HD4400, I think you mean AppleIntelSKLGraphicsFramebuffer. I have HDMI video & audio working for HD 530 (0x191b0000 - mobile) with smbios MBP 13,2, with FakePCIID + FakePCIID_Intel_HD_Graphics + FakePCIID_Intel_HDMI_Audio In response to post #10, can't you change "Default for display" to "Scaled" and select lower resolution?

Yeah, the SSDT generated with ssdtPRGen.sh for Skylake has been causing KP on mine too. Try enabling HWPEnable under CPU with Clover Configurator. New way of managing speed stepping on Skylake system. You can report the issue to Piker-Alpha if you prefer using SSDT

Sorry, Nvs4200m won't work on Sierra as far as I could tell so far. See here and here

Here, just replace the VoodooPS2Controller with VoodooPS2Controller_R6B6 in /EFI/Clover/Kexts/Other AppleHDAIDT to /EFI/Clover/Kexts/Other/LE

See post #93 If it's not working, try removing FakePCIID_Intel_HDMI_Audio.kext and test again