Jake Lo

howoarang, try this M4800.zip NaXx, are you on Sierra? Sierra need 4 new patches for Wireless to work DW1550/DW1560 Add to KextToPatch

The only significant differenceI could see from the 2 Config files is USB HighCurrent is enabled under Devices. Try enabling that and see if my bootpack will boot.

How about sleep? Does that work? You might have to plug power adapter when you wake it like my M6800.

Add this to your patched folder, in Config.plist add it to the SortedOrder under SSDT of ACPI SSDT-6.aml.zip

wonder2, mine also shows Video BIOS Version 2132v08. I have tested downgrading bios to A02 and then up to A06, anything over that, artifacts occurs. I have also upgrade to A11 and then directly down to A06 and it's still fine unlike the E6x30 where you must downgrade to A03 then to A11. So I recheck the bootpack and noticed I have left out something in the Config file. I have now re upload the new files, go ahead and update and see if it helps. You just need to replace the Config.plist file. The DSDT/SSDT are patched from Bios A06, so make sure to stick with that version.

use 0x16260006 DVMT only needs to be set to 96MB, might be more for some other system to get pass the memory preallocation else you get a KP. 0x16260006 has been known to work best for HD5500, but you could also try 0x16160000 or 0x16160002

@ss2sameer, I was not able to get QE/CI with the M2000m even with the web driver. It'll always show 0MB for display. Tried install El Capitan as you did and use the web driver for that version and still the same. Still trying... @lamcrkh516, Boot to Clover GUI, hit F4, then compress and attach the folder /Clover/ACPI/Origin. I'll try to patch the DSDT/SSDT to disable the ATI card so that you can use HD530. Installing OS X first and then create a second partition to install Windows is my prefer way as well.

Here's my current files. Still a lot of work to be done, but will work. Sleep won't work, so disable it or use sleepless.app. 7510_Sierra.zip

lamcrkh516, It's better you enable switchable graphics to use the HD 530 since your AMD might not be supported.

Post #2 of the guide linked. 6430u_1366x768

see here

See post# 37, just leave out the SSDT.aml in /Clover/ACPI/Patched

Do you have the other SSDT files? Need the SSDT with the NvdTabl in it.

are you trying to sleep with the HD 4600 or nVidia K1100m? Does brightness control / slider work?

Errr. Forgot the audio patch. Reuploaded in post #30

Use iMac17.1

Just install from the PrefPane, and it just checks and downloads the current version from sourceforge, you still have to manually launch the installer which is no different than what I normally do. It should check if you have HFSplus in Driverx64UEFI and not install VboxHfs as Bronxteck comment above. That doesn't seem to be the case with you. What version were you on before the update? You could check it in EFI-Backups.

Hmm, I have never done it from Clover in System PrefPane before, but have always update with the installer and never had this issue.

do you have ACPIPoller installed?

Is that right on boot or after wake from sleep? Try the CodecCommander.kext from my M6800 bootpack Remove EAPDFix if you have it.

Let's make sure you have the BiOS settings set correctly. You need both TPM and SecureBoot disabled. SATA Operations set to AHCI Boot Options set to UEFI Those itself should be enough.

Sorry try new uploaded files. Used some wrong patches previously.

I think lamcrkh516 has AMD discrete card not Nvidia. He should skip installing the Nvidia web driver.

Patched for Bios v A14 E7250_A14.zip

R6B7 on Sierra 10.12.2 -V7 ID: E7=0x73 0x03 0x0a, EC=0x88 0xba 0x2a Touchpad works fine but not trackstick. The mouse button below the trackstick also not responding. After, wake touchpad is disabled and after a second sleep/wake, keyboard would stop working and system will hang. -V3 Rushmore, id: E7=0x73 0x03 0x0a, EC=0x88 0x08 0x22 Agree, touchpad/trackstick running quite smooth. Only issue I have is keyboard and mouse stop after sleep. Will commence further testing. Thanks Dr. Hurt.