-
Posts
14365 -
Joined
-
Last visited
-
Days Won
868
Content Type
Profiles
Articles, News and Tips
Forums
Everything posted by Jake Lo
-
If you're using Clover, make sure the following are disabled: FixRegions NewWay
-
Just download the chameleon.pkg file and double click it. Select the destination if the default is not your SSD.
-
If you're using Clover, make sure the following are disabled: FixRegions NewWay
-
Please NullCPUPowerManagement.kext in /Extra/Extensions
-
The specs: BIOS A09 (Sata Operation -> AHCI mode, Bootlist Option -> UEFI) 4th Generation Intel Core i7-4700MQ Haswell processor (6MB Cache, up to 3.4GHz w/ Intel Turbo Boost) Slot-Loading Dual Layer DVD Burner, DVD+-RW, Stealth Black with Soft Touch Finish, 63WHr 8-Cell Primary Battery 8GB Dual Channel DDR3L at 1600MHz 750GB 7200RPM SATA III 6Gb/s Hard Drive, 256GB mSATA 14.0" High-definition WLED (1920 x 1080) 1 GB DDR5 nVidia GeForce GT 750M using NVIDIA Optimus technology Integrated Intel HD4600 GPU (PCI ven id 0x8086, dev id 0x0416) Killer NIC 1202 802.11n WiFi, Bluetooth 4.0 Killer E2200 PCI-E Gigabit Ethernet Integrated HD Webcam Realtek PCIE CardReader Backlit Keyboard 2 x USB 3.0 ports; 1 x USB 3.0 port with PowerShare; 1 x HDMI port; 1 x Mini Display-Port 1 x Audio microphone port; 1 x headphones/microphone combo port; 1 x headphone/speaker port Slots One half mini-card slot; 2 x full mini-card slots Working: Full QE/CI with HD 4600 / Disable nVidia GeForce GT 750m through DSDT/SSDT Wireless (Replaced with supported device) HDMI Video/ DP Video/ HDMI Audio Internal Speaker/Headphone/Mic USB 3.0 Webcam LAN WIP: Sleep/Wake (Wake up right away = GLAN) Update: I no longer have this system, try replacing with this DSDT for sleep dsdt.aml.zip Not Working: ExpressCard Keyboard Functions: Fn+Home = Disabled Touchpad Fn+F6, F7, F8 = Mute, volume control Fn+PageUP/PageDown = Brightness control Steps: Follow Clover UEFI Guide (v3270), replace Clover folder with Bootpack After Installation, install kexts in /EFI/Clover/Kexts/Others/LE to /Library/Extensions Repair permission and rebuild cache sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo kextcache -Boot -U / CLOVER_AlienWare14.zip
- 1 reply
-
- 2
-
Why not just replace the internal wireless card? Works way better. Go to Dell and order it if you're in the US, DW1560 NGFF M.2. roughly $20 with shipping. Make sure it supports the M.2 NGFF cards first
-
ELAN, FocalTech and Synaptics (Smart Touchpad) Driver
Jake Lo replied to EMlyDinEsH's topic in Smart Touchpad
He probably meant 'Inertia'. -
Ok. Maybe switch ig-platform-ip back to 0x16160002 or play with different value to see which works better. For me it's 0x16260006
-
I already did in the config attached above. Have you tested it? Can't see image clearly, too small.
-
We'll need more information. What's the model, include CPU, GPU, display resolution... What boot loader are you using? Chameleon, Clover? Which OS X version? What process were you following?
-
You need to set the DVMT pre-allocated memory in BIOS settings to 96MB. If your BIOS is locked, then you'll need to patch the FB to pass the Stolen Memory assertion. It's already in your Config file, it just needs to be enabled. I set InjectIntel = True and ig-platform-id=0x16260006 and enable the FB patch. Hope this helps. config.plist.zip
-
Dell Latitude e6440 i7-4600M with Intel HD 4600M - HDMI hangs
Jake Lo replied to abrellm's topic in The Archive
From a quick look, the patched looks ok. But I went ahead and patched your original. Place it in /Extra/Extensions. Launch myHack/myfix (quick). HD4600_HDMI.zip -
Try this and install FakePCIID_BCM94352Z_as_BCM94360CS2.kext to /S/L/E
-
Dell Latitude e6440 i7-4600M with Intel HD 4600M - HDMI hangs
Jake Lo replied to abrellm's topic in The Archive
See post #19 of his guide to manually patch it. Or if you are planning to upgrade to 10.10.x, he included the patched files in his bootpacks. Let us know if you need assistance patching it. -
If you have Optimus disabled, then use Wern's DSDT. If you have it enabled, then it depends on your display resolution. Select one of these and rename to DSDT.aml E6420/E6520 Optimus Enabled = DSDT-off.aml ; Check Optimus in BIOS, low Res 1366x768 and below E6420/E6520 Optimus Enabled = DSDT-off_2ch.aml ; Check Optimus in BIOS, higher Res 1600x900 and higher
-
DSDT was already patched for SD Card reader. Check Disk Utility to see if it needs to be formatted. Please upload your latest ioreg so it could be confirmed.
-
Add NullCPUPowermanagement.kext to /Extra/Extensions or install the patched AICPUPM from Hervé's link to /System/Library/Extensions
-
boot with -v -f and then post the error screen
-
run in terminal sudo touch /S*/L*/E* && sudo kextcache -Boot -U / What's the resolution of your display? Make sure to select the correct DSDT base on that.
-
* Wern has a DSDT for Nvs4200M that has sleep/wake working. See here.
-
Are you installing with Optimus Enable or Disable? Make sure to use the correct DSDT depending on what you select. If you do have NVS4200m, I think it'll be best to disable Optimus and use Wern's DSDT since he was able to get sleep to work with it. Update: * Wern has a DSDT for Nvs4200M that has sleep/wake working. See here. Make sure to set the BIOS accordingly. Best result is to set BIOS to 'Load Default', hit apply, and then got to SATA Operations and set it to AHCI. Oh and under video, make sure Optimus is uncheck.
-
R4RC1 version test V3 id E7=0x73 0x02 0x64, EC=0x88 0x07 0x9d (E6x20 models) Didn't test since Wern and Gia were already testing V3 id E7=0x73 0x03 0x0a, EC=0x88 0x08 0x1d (E6430/E6230/Exx30) - KP on both Yosemite and Mavericks - I tested several times just to confirm I didn't do something wrong - Hope you could figure this out since the older version works but only on Yosemite and newer (R3RC4) V3 id E7=0x73 0x03 0x0a, EC=0x88 0x08 0x22 (E7440/E7240/Precision M6800) Tested on Mavericks, Yosemite and El Capitan beta. - Trackstick works well with scrolling / set speed to 3/4 - Right click with 2 finger tab - works fine - Tab and drag works fine - Touchpad scrolling works best with Middle and Ring fingers or middle finger on top of index finger - Touchpad works with inertia - works quite well, no pointer jumping - Side scrolling - no inertia, works as before
-
try removing OsxAptioFix2Drv-64.efi from drivers64UEFI
- 5 replies
-
- Lenovo z51-70
- Clover3202
- (and 2 more)
-
@girardpallet which recommendation are you referring to? Refer back to the last few posts. No issue for uranis. His Memory shows correctly as are mine. @uranis, No ,sdcard reader needs to be patch to work, not OOB.
-
Keyboard backlight Fn+right arrow if you have that function. It should have the icon on it. Thanks for the confirmation. Does the new DSDT fix the HDMI hot plugging issue? Sleep with LID Close? Wake with LID Open?