polyzargone

Well I think you're right. I was convinced that if myHack used to put FakeSMC in E/E there was a reason for. So I kept doing it it that way. But If I understand well, FakeSMC and Plugins are meant to be in S/L/E rather than in E/E because of versions numbers alterations due to myHack ?

Hello and thanks for the quick reply But I already know that HW Monitor installs the FakeSMC & Plugins directly in S/L/E when a myHack setup puts it in E/E by default. So everytime I have to deal with install/re-install/update FakeSMC, I double check that it is only in E/E and I systematically do a myFix Quick to set everything OK. But whatever, If I'm made no mistake, putting the FakeSMC.Kext & its plugins in E/E and running a myFix should automaticaly set it's version number to 1111 ? This way, it should be the newest one whatever other FakeSMC are installed and it should also be the only one to be loaded ? But it doesn't matter as I have just one FakeSMC and it's in E/E

I tried every solutions you mentioned but none had success so far. I also tried the "myFix" myFix hack of myHack Here's the result of kextcache-prelinked-kernel (sorry for the long post) MacBook-Pro:~ vince$ sudo kextcache -prelinked-kernel Password: kext com.squirrels.driver.AirParrotSpeakers 108009000 is in exception list, allowing to load kext com.mice.driver.WirelessGamingReceiver 100001012 is in exception list, allowing to load kext com.mice.driver.Wireless360Controller 100001012 is in exception list, allowing to load kext com.realtek.driver.RTL8192CU 102100009000 is in exception list, allowing to load kext org.voodoo.driver.PS2Trackpad 111100009000 is in exception list, allowing to load kext org.voodoo.driver.VoodooHDA 111100009000 is in exception list, allowing to load WARNING - Invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext "/System/Library/Extensions/myHack.kext/Contents/PlugIns/Patched_10.7_AppleRTC.kext" kext com.evosx86.driver.lspcidrv 111100009000 is in exception list, allowing to load LPCSensors.kext is not valid; omitting. GPUSensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. GPUSensors.kext is missing dependencies (including anyway; dependencies may be available from elsewhere) kext org.hwsensors.driver.GPUSensors 111100009000 is in exception list, allowing to load FakeSMC.kext is not valid; omitting. CPUSensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. CPUSensors.kext is missing dependencies (including anyway; dependencies may be available from elsewhere) kext org.hwsensors.driver.CPUSensors 111100009000 is in exception list, allowing to load kext my.name.adlan.BCM5722D 111100009000 is in exception list, allowing to load WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/System/Library/Extensions/myHack.kext/Contents/PlugIns/AppleSmartBatteryManager.kext" kext com.Apple.driver.PS2Mouse 111100009000 is in exception list, allowing to load kext com.Apple.driver.PS2Keyboard 111100009000 is in exception list, allowing to load WARNING - Invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext "/System/Library/Extensions/myHack.kext/Contents/PlugIns/ApplePS2Controller.kext" kext net.osrom.kext.Disabler 111100009000 is in exception list, allowing to load kext com.yourcompany.driver.AppleACPIPS2Nub 111100009000 is in exception list, allowing to load ACPISensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. ACPISensors.kext is missing dependencies (including anyway; dependencies may be available from elsewhere) kext org.hwsensors.driver.ACPISensors 111100009000 is in exception list, allowing to load kext com.sojugarden.myHack 101009000 is in exception list, allowing to load kext com.jmicron.JMicronATA 101069000 is in exception list, allowing to load kext com.ATTO.driver.ATTOExpressSASRAID 307029000 is in exception list, allowing to load kext com.ATTO.driver.ATTOExpressSASHBA3 100059000 is in exception list, allowing to load kext com.ATTO.driver.ATTOExpressSASHBA 200009000 is in exception list, allowing to load kext com.ATTO.driver.ATTOExpressPCIUl4 404029000 is in exception list, allowing to load kext com.ATTO.driver.ATTOCelerityFC 304089000 is in exception list, allowing to load kext com.squirrels.driver.AirParrotSpeakers 108009000 is in exception list, allowing to load kext com.Accusys.driver.Acxxx 300029000 is in exception list, allowing to load kext com.mice.driver.Xbox360Controller 100001012 is in exception list, allowing to load kext com.squirrels.driver.AirParrotSpeakers 108009000 is in exception list, allowing to load kext com.mice.driver.WirelessGamingReceiver 100001012 is in exception list, allowing to load kext com.mice.driver.Wireless360Controller 100001012 is in exception list, allowing to load kext com.mice.driver.Xbox360Controller 100001012 is in exception list, allowing to load GPUSensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. CPUSensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. ACPISensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. GPUSensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. Prelink failed for org.hwsensors.driver.GPUSensors; omitting from prelinked kernel. CPUSensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. Prelink failed for org.hwsensors.driver.CPUSensors; omitting from prelinked kernel. ACPISensors.kext - no compatible dependency found for org.netkas.driver.FakeSMC. Prelink failed for org.hwsensors.driver.ACPISensors; omitting from prelinked kernel. There's clearly a problem with FakeSMC.kext and its plugins but after a re-install of it from Kozlek's FakeSMC & HW Sensors or just by updating HW Monitor and FakeSMC & Plugins, it's still the same. And as I said, even by running again the new myFix, the kernel/kext cache seems to be corrupted.

I have the same exact problem on my Dell D830 Nvidia as described here. I did what's explain in the post to fix it but I still have the same issue at the next boot. I've check with ls -@l again et the attributes were clean but I still have to boot with -f AND UseKernelCache=No. Otherwise, the systems boots but stucks at the Gray Apple logo and the spinning wheel. I can access it via network or ssh but the UI doesn't load at all. I've noticed that this problem slowly begin to spread to all my myHack-based Hackintoshes (v 3.3.1 - re-downloaded twice) and I can't figure out why and when the issue come from. Content of /Extra : AppleACPIPS2Nub.kext AppleHDADisabler.kext ApplePS2Controller.kext AppleSmartBatteryManager.kext BCM5722D.kext FakeSMC.kext lspcidrv.kext Patched_10.7_AppleRTC.kext VoodooHDA.kext Here's my Syslog without any boot-flags : Longterm timer threshold: 1000 ms Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64 vm_page_bootstrap: 1008325 free pages and 32059 wired pages kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000] zone leak detection enabled "vm_compressor_mode" is 4 standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 Refusing new kext com.apple.driver.AppleSmartBatteryManager, v161.0: already have prelinked v1111.0. Refusing new kext com.apple.driver.AppleRTC, v2.0: already have prelinked v1111.0. AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers AppleKeyStore starting (BUILT: Jun 3 2014 21:40:51) IOAPIC: Version 0x20 Vectors 64:87 ACPI: sleep states S3 S4 S5 pci (build 21:30:51 Jun 3 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000 [ PCI configuration begin ] RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: (built 21:36:10 Jun 3 2014) initialization complete AppleSmartBatteryManager: Version 1.31 starting AppleSmartBattery: Using ACPI regular battery information method _BIF console relocated to 0xf3000000 [ PCI configuration end, bridges 8, devices 17 ] PXS2 cannot assert wake from D3cold mcache: 2 CPU(s), 64 bytes CPU cache line size mbinit: done [64 MB total pool size, (42/21) split] Pthread support ABORTS when sync kernel primitives misused BCM5722D (Build date/time: Jun 24 2013 12:20:29) rooting via boot-uuid from /chosen: E16EC4AB-B365-3273-87A2-76275EA072B4 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeLZVN kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeLZVN load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded FireWire runtime power conservation disabled. (3) AppleIntelCPUPowerManagementClient: ready ApplePS2Controller: Timed out on mouse input stream at readDataPort. my_name_adlan_BCM5722D: Model: BCM5755M NetXtreme Gigabit Ethernet my_name_adlan_BCM5722D: Loaded successfully FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 424fc0001ce8d070; max speed s400. Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/IDE0@1F,2/AppleICH8AHCI/PRI@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK1655GSX Media/IOFDiskPartitionScheme/Untitled 2@2 BSD root: disk0s2, major 1, minor 2 ApplePS2Controller: Timed out on mouse input stream at readDataPort. VoodooPS2SynapticsTouchPad loaded hfs: mounted Macintosh HD on device root_device ApplePS2Trackpad: ALPS GlidePoint v8.99 No interval found for . Using 8000000 ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0 4.081385: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0 4.086745: Atheros: mac 128.2 phy 13.0 radio 12.0 4.086761: Use hw queue 0 for WME_AC_BE traffic 4.086770: Use hw queue 1 for WME_AC_BK traffic 4.086780: Use hw queue 2 for WME_AC_VI traffic 4.086789: Use hw queue 3 for WME_AC_VO traffic 4.086798: Use hw queue 8 for CAB traffic 4.086806: Use hw queue 9 for beacons 4.086940: wlan_vap_create : enter. devhandle=0x6a75a6b0, opmode=IEEE80211_M_STA, flags=0x1 4.087010: wlan_vap_create : exit. devhandle=0x6a75a6b0, opmode=IEEE80211_M_STA, flags=0x1. 4.087067: ATH tunables: 4.087072: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128] VM Swap Subsystem is ON Waiting for DSMOS... IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification IO80211Interface::efiNVRAMPublished(): AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving). Controller: Intel 82801H (vendor ID: 8086, device ID: 284b) No interval found for . Using 8000000 hfs: mounted Mac OS X 10.10 on device disk1s1 flow_divert_kctl_disconnect (0): disconnecting group 1 hfs: mounted Time Machine on device disk1s2 Sound assertion in AppleMikeyI2C at line 157 Sound assertion in AppleMikeyI2C_CD3275 at line 110 Sound assertion in AppleMikeyI2C_CD3275 at line 150 Sound assertion in AppleMikeyI2C_CD3275 at line 64 AtherosNewma40P2PInterface::init name <p2p0> role 1 AtherosNewma40P2PInterface::init() <p2p> role 1 34.894131: performCountryCodeOperation: Not connected, scan in progress[0] 34.899639: setWOW_PARAMETERS:wowevents = 2(1) en1: 802.11d country code set to 'FR '. en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 init probe start [iOBluetoothHCIController][start] -- completed NVDAStartup: Official NVDANV50HAL loaded and registered TUFS: starting (version 2013.3.14, x86_64 (10.6+), built Mar 14 2013, 14:13:23) **** [iOBluetoothHCIController][searchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport! en1: BSSID changed to 4c:09:b4:0c:28:87 AirPort: Link Up on en1 85.049204: apple80211Request[10514] Unsupported ioctl 181 en1: BSSID changed to 4c:09:b4:0c:28:87 AirPort: RSN handshake complete on en1 flow_divert_kctl_disconnect (0): disconnecting group 1 utun_ctl_connect: creating interface utun0 flow_divert_kctl_disconnect (0): disconnecting group 1 And now, my Syslog with -f & UseKernelCache=No : Longterm timer threshold: 1000 ms Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64 vm_page_bootstrap: 1008325 free pages and 32059 wired pages kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000] zone leak detection enabled "vm_compressor_mode" is 4 standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 Refusing new kext com.apple.driver.AppleSmartBatteryManager, v161.0: already have prelinked v1111.0. Refusing new kext com.apple.driver.AppleRTC, v2.0: already have prelinked v1111.0. AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers AppleKeyStore starting (BUILT: Jun 3 2014 21:40:51) IOAPIC: Version 0x20 Vectors 64:87 ACPI: sleep states S3 S4 S5 pci (build 21:30:51 Jun 3 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000 [ PCI configuration begin ] RTC: Only single RAM bank (128 bytes) AppleIntelCPUPowerManagement: (built 21:36:10 Jun 3 2014) initialization complete AppleSmartBatteryManager: Version 1.31 starting AppleSmartBattery: Using ACPI regular battery information method _BIF console relocated to 0xf3000000 [ PCI configuration end, bridges 8, devices 17 ] PXS2 cannot assert wake from D3cold mcache: 2 CPU(s), 64 bytes CPU cache line size mbinit: done [64 MB total pool size, (42/21) split] Pthread support ABORTS when sync kernel primitives misused BCM5722D (Build date/time: Jun 24 2013 12:20:29) rooting via boot-uuid from /chosen: E16EC4AB-B365-3273-87A2-76275EA072B4 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeLZVN kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeLZVN load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded FireWire runtime power conservation disabled. (3) AppleIntelCPUPowerManagementClient: ready ApplePS2Controller: Timed out on mouse input stream at readDataPort. my_name_adlan_BCM5722D: Model: BCM5755M NetXtreme Gigabit Ethernet my_name_adlan_BCM5722D: Loaded successfully FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 424fc0001ce8d070; max speed s400. Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/IDE0@1F,2/AppleICH8AHCI/PRI@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK1655GSX Media/IOFDiskPartitionScheme/Untitled 2@2 BSD root: disk0s2, major 1, minor 2 ApplePS2Controller: Timed out on mouse input stream at readDataPort. VoodooPS2SynapticsTouchPad loaded hfs: mounted Macintosh HD on device root_device ApplePS2Trackpad: ALPS GlidePoint v8.99 No interval found for . Using 8000000 ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0 4.081385: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0 4.086745: Atheros: mac 128.2 phy 13.0 radio 12.0 4.086761: Use hw queue 0 for WME_AC_BE traffic 4.086770: Use hw queue 1 for WME_AC_BK traffic 4.086780: Use hw queue 2 for WME_AC_VI traffic 4.086789: Use hw queue 3 for WME_AC_VO traffic 4.086798: Use hw queue 8 for CAB traffic 4.086806: Use hw queue 9 for beacons 4.086940: wlan_vap_create : enter. devhandle=0x6a75a6b0, opmode=IEEE80211_M_STA, flags=0x1 4.087010: wlan_vap_create : exit. devhandle=0x6a75a6b0, opmode=IEEE80211_M_STA, flags=0x1. 4.087067: ATH tunables: 4.087072: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128] VM Swap Subsystem is ON Waiting for DSMOS... IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification IO80211Interface::efiNVRAMPublished(): AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving). Controller: Intel 82801H (vendor ID: 8086, device ID: 284b) No interval found for . Using 8000000 hfs: mounted Mac OS X 10.10 on device disk1s1 flow_divert_kctl_disconnect (0): disconnecting group 1 hfs: mounted Time Machine on device disk1s2 Sound assertion in AppleMikeyI2C at line 157 Sound assertion in AppleMikeyI2C_CD3275 at line 110 Sound assertion in AppleMikeyI2C_CD3275 at line 150 Sound assertion in AppleMikeyI2C_CD3275 at line 64 AtherosNewma40P2PInterface::init name <p2p0> role 1 AtherosNewma40P2PInterface::init() <p2p> role 1 34.894131: performCountryCodeOperation: Not connected, scan in progress[0] 34.899639: setWOW_PARAMETERS:wowevents = 2(1) en1: 802.11d country code set to 'FR '. en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 init probe start [iOBluetoothHCIController][start] -- completed NVDAStartup: Official NVDANV50HAL loaded and registered TUFS: starting (version 2013.3.14, x86_64 (10.6+), built Mar 14 2013, 14:13:23) **** [iOBluetoothHCIController][searchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport! en1: BSSID changed to 4c:09:b4:0c:28:87 AirPort: Link Up on en1 85.049204: apple80211Request[10514] Unsupported ioctl 181 en1: BSSID changed to 4c:09:b4:0c:28:87 AirPort: RSN handshake complete on en1 flow_divert_kctl_disconnect (0): disconnecting group 1 utun_ctl_connect: creating interface utun0 flow_divert_kctl_disconnect (0): disconnecting group 1 MacBook-Pro:~ root# reboot MacBook-Pro:~ root# Connection to 192.168.1.18 closed by remote host. Connection to 192.168.1.18 closed. sh-3.2# ssh [email protected] Password: Last login: Sat Sep 6 15:44:27 2014 from pc60.home MacBook-Pro:~ root# sudo dmesg 4 "name" not a kext "Kernel-__SYMTAB" not a kext Kext org.netkas.driver.FakeSMC error - OSBundleCompatibleVersion 1212 > CFBundleVersion 1111 (must be <=). Kext org.hwsensors.driver.LPCSensors error - OSBundleCompatibleVersion 1212 > CFBundleVersion 1111 (must be <=). FakeSMCKeyStore: started AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers AppleKeyStore starting (BUILT: Jun 3 2014 21:40:51) IOAPIC: Version 0x20 Vectors 64:87 CPUSensors: CPU family 0x6, model 0xf, stepping 0xb, cores 2, threads 2, TJmax 90 ACPI: sleep states S3 S4 S5 CPUSensors: setting platform keys to [M75 ] CPUSensors: started pci (build 21:30:51 Jun 3 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000 [ PCI configuration begin ] console relocated to 0xf3000000 [ PCI configuration end, bridges 8, devices 17 ] AppleIntelCPUPowerManagement: (built 21:36:10 Jun 3 2014) initialization complete AppleSmartBatteryManager: Version 1.31 starting AppleSmartBattery: Using ACPI regular battery information method _BIF ACPISensors (THM): 1 sensor added ACPISensors (THM): started FakeSMC v6.8.1307 Copyright 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved. FakeSMC: 13 preconfigured keys added SMC: successfully initialized SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0x3201, Winbond sequence ID=0xffff RTC: Only single RAM bank (128 bytes) mcache: 2 CPU(s), 64 bytes CPU cache line size mbinit: done [64 MB total pool size, (42/21) split] Pthread support ABORTS when sync kernel primitives misused PXS2 cannot assert wake from D3cold rooting via boot-uuid from /chosen: E16EC4AB-B365-3273-87A2-76275EA072B4 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeDataless kmod start BCM5722D (Build date/time: Jun 24 2013 12:20:29) my_name_adlan_BCM5722D: Model: BCM5755M NetXtreme Gigabit Ethernet my_name_adlan_BCM5722D: Loaded successfully GeForceSensors (pci1): trying to shadow VBIOS... com.apple.AppleFSCompressionTypeLZVN kmod start FireWire runtime power conservation disabled. (3) com.apple.AppleFSCompressionTypeZlib kmod startGeForceSensors (pci1): VBIOS successfully read from PRAMIN com.apple.AppleFSCompressionTypeDataless load succeeded com.apple.AppleFSCompressionTypeLZVN load succeeded com.apple.AppleFSCompressionTypeZlib load succeeded FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 424fc0001ce8d070; max speed s400. AppleIntelCPUPowerManagementClient: ready ApplePS2Controller: Timed out on mouse input stream at readDataPort. Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/IDE0@1F,2/AppleICH8AHCI/PRI@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK1655GSX Media/IOFDiskPartitionScheme/Untitled 2@2 BSD root: disk0s2, major 1, minor 2 ApplePS2Controller: Timed out on mouse input stream at readDataPort. VoodooPS2SynapticsTouchPad loaded hfs: mounted Macintosh HD on device root_device ApplePS2Trackpad: ALPS GlidePoint v8.99 No interval found for . Using 8000000 ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0 6.810604: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0 6.825085: Atheros: mac 128.2 phy 13.0 radio 12.0 6.832284: Use hw queue 0 for WME_AC_BE traffic 6.839162: Use hw queue 1 for WME_AC_BK traffic 6.846001: Use hw queue 2 for WME_AC_VI traffic 6.852802: Use hw queue 3 for WME_AC_VO traffic 6.859440: Use hw queue 8 for CAB traffic 6.865831: Use hw queue 9 for beacons 6.872212: wlan_vap_create : enter. devhandle=0x6abe36b0, opmode=IEEE80211_M_STA, flags=0x1 6.880043: wlan_vap_create : exit. devhandle=0x6abe36b0, opmode=IEEE80211_M_STA, flags=0x1. 6.887821: ATH tunables: 6.893839: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128] GeforceSensors: still waiting for accelerator to start... VM Swap Subsystem is ON Waiting for DSMOS... GeforceSensors: still waiting for accelerator to start... IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification IO80211Interface::efiNVRAMPublished(): AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving). flow_divert_kctl_disconnect (0): disconnecting group 1 hfs: mounted Mac OS X 10.10 on device disk1s1 hfs: mounted Time Machine on device disk1s2 AtherosNewma40P2PInterface::init name <p2p0> role 1 AtherosNewma40P2PInterface::init() <p2p> role 1 39.473455: performCountryCodeOperation: Not connected, scan in progress[0] 39.498062: setWOW_PARAMETERS:wowevents = 2(1) en1: 802.11d country code set to 'FR '. en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 GeforceSensors: still waiting for accelerator to start... GeForceSensors (pci1): chipset: G86 (NV86) bios: 60.86.68.00 GeForceSensors (pci1): started Controller: Intel 82801H (vendor ID: 8086, device ID: 284b) Previous Shutdown Cause: 5 SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode No interval found for . Using 8000000 NVDAStartup: Official Sound assertion in AppleMikeyI2C at line 157 Sound assertion in AppleMikeyI2C_CD3275 at line 110 Sound assertion in AppleMikeyI2C_CD3275 at line 150 Sound assertion in AppleMikeyI2C_CD3275 at line 64 SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0x3201, Winbond sequence ID=0xffff SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0x3201, Winbond sequence ID=0xffff NVDANV50HAL loaded and registered [AGPM Controller] unknownPlatform init probe start DSMOS has arrived [iOBluetoothHCIController][start] -- completed en1: BSSID changed to 4c:09:b4:0c:28:87 AirPort: Link Up on en1 83.873019: apple80211Request[10514] Unsupported ioctl 181 en1: BSSID changed to 4c:09:b4:0c:28:87 AirPort: RSN handshake complete on en1 flow_divert_kctl_disconnect (0): disconnecting group 1 TUFS: starting (version 2013.3.14, x86_64 (10.6+), built Mar 14 2013, 14:13:23) nspace-handler-set-snapshot-time: 1410011954 ApplePS2ALPSGlidePoint: Dictionary Object: HIDDefaultParameters Value: ?? ApplePS2ALPSGlidePoint: Dictionary Object: HIDClickTime Value: 500000000 [...] [...] [...] ApplePS2ALPSGlidePoint: Dictionary Object: HIDScrollZoomModifierMask Value: 0 ApplePS2ALPSGlidePoint: Dictionary Object: HIDDefaultParameters Value: ?? **** [iOBluetoothHCIController][searchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport! utun_ctl_connect: creating interface utun0 flow_divert_kctl_disconnect (0): disconnecting group 1 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES] 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1205] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES] CODE SIGNING: cs_invalid_page(0x1000): p=1205[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 242000] [com.apple.message.signature2 e087937868c1bd5e5eaf8fc21531f42e75c0ffd2] [com.apple.message.signature3 22d56030a11c89d9b54e8f1b464b540b23c459e4] [com.apple.message.summarize YES] 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1209] [com.apple.message.signature3 AirServer] [com.apple.message.summarize YES] CODE SIGNING: cs_invalid_page(0x100241000): p=1209[AirServer] final status 0x0, allowing (remove VALID) page 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 3345639bd98273913ff25086fe0151f45fea0fa3] [com.apple.message.signature3 38872323d4adae2cb310de88ceeeae695630ffd7] [com.apple.message.summarize YES] 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1240] [com.apple.message.signature3 ksadmin] [com.apple.message.summarize YES] CODE SIGNING: cs_invalid_page(0x1000): p=1240[ksadmin] final status 0x0, allowing (remove VALID) page 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 1241] [com.apple.message.signature3 ksadmin] [com.apple.message.summarize YES] CODE SIGNING: cs_invalid_page(0x1000): p=1241[ksadmin] final status 0x0, allowing (remove VALID) page ApplePS2ALPSGlidePoint: Dictionary Object: HIDWaitCursorFrameInterval Value: 33332999 ApplePS2ALPSGlidePoint: Dictionary Object: HIDDefaultParameters Value: ??

Updated Ok to DP6. No major changes beside some GUI adjustments (but still this ugly Finder icon )

D830 nVidia works fine and is very responsive with Yosemite Public Beta. Everything works fine so far ! (iTunes 12 is not included, you have to download it from the App Store)

Problem solved thanks to Azzo94 ! http://www.insanelymac.com/forum/topic/298912-yosemite-dp2/page-2?do=findComment&comment=2033787

I tried r2380 V3 (which is supposed to support DP2) and it's still the same. That's strange because I used Clover to boot right after reboot to complete the update and it's OK. I was thinking that once it was done, I could re-use Chameleon but there's still this bunch of errors. So something must have changed between DP1 and DP2.

Correct, I've experienced it ! But trying to boot with Clover didn't fixed the problem… I'm re-installing from scratch and will update as soon as the DP1 install is over. Chameleon needs an update !

Well, don't know if VoodooBattery works as System Preferences instantly uncheck the "show battery state box" as soon as I click it Are you using myHack.kext with Yosemite ? What's the purpose of lspcidrv.kext & CSRBluetoothHostControllerUSBTransport.kext ?

Works fine with D830 nVidia and Chameleon bootloader. VoodooHDA 2.8.5 didn't worked for me so I used 2.8.4 and eveything's OK except for VoodooBattery.

Ok, sorry, I was searching the dedicated thread and now I found it Thanks for help !

So mine should be : 1.2f10 0120f00 0010 correct ? But i's also mentionned that using olders SMBios prior to MacBook Pro 4,1 is useless as they don't enable Speedstate so I'm wondering if I should modify it ?

Hi ! Just a little question about the performance tunning guide. I'm running a Dell D830 nVidia Quadro NVS 135M with an Intel T7250 @ 2.0 Ghz and 2 Gb or RAM running Mavericks 10.9.3 and I'm willing to optimize it. So i've read the Performance tunning guide with FakeSMC & SMBios.plist and it seems that my laptop match a MacBook Pro 1,1 with 1.2f10 (SMC 1.0). My question is how to convert this value in PlistEditor Pro to modify the Data field like mentionned in the guide : "SMC version 1.30f3 which is displayed in Data field as 01300F00 0003" ? Thanks for help and congrats to the OSXlatitude crew which is doing a wonderful job on how to get OS X on PC !

Hi Hervé, Indeed, the BSA Kernel r9 seems to have been released in December 2013 so months before the official announcement from Apple. Unfortunately, I have already updated to 10.9.2 and I'm not willing to re-install a 10.9.1. So I guess I'll wait till the next stable AMD kernel update is out. I can manage the cpus=1 issue for now, after all the systems is still very functional. Thanks for your support and happy Hackintoshing !

It's the AMD 10.9/10.9.1/10.9.2 kernel UPDATE III with full sse4 support Version R9 found at OSX86.net.

Yes of course double, triple check ! But after deeper searches, I've found out that the faulty drive was not the 500 GB but the 80 GB hosting OS X. Just removed it this afternoon and created a dual boot OS X/Windows 8.1 with boothfs and it seems OK so far. Though I still have to boot with cpus=1 which is really annoying but I didn't found a working fix for this.

Hi everyone ! I have a strange problem. I've just installed 10.9 on my AMD Athlon 64 x2 2.0 Ghz 2 GB DDR2 RAM. I have 2 SATA drives, one of 80 GB for OS X and another one of 500 GB for Windows 8.1 / Data. Everythings works fine but for an unknown reason, sometimes the second 500 GB drive suddendly disappear from my desktop saying Ejecting Error, try to disconnect the drive by…etc, just as if it was an USB external drive. System Profiler detects it as a SATA drive, the icons aren't yellow, there's just like any normal drive and most of time, I can read/write on them without problems. I did a Time Machine backup without issues. First I thought that it was a Kext conflict between SuperVIAATA.kext and IOAHCIBlockStorageInjector.kext or AHCI_3rdPartySata.kext but I tried to remove the two last of them and be able to boot fine (Removing SuperVIAATA.kext result as "still waiting for root device"). But the problem persist and I can't figure why ! The drive works fine on Windows and shows no errors, SMART state is reported as capable and OK and the 80 GB hosting OS X works fine as well. My desktop is a HP dc5750 with the latest BIOS (configure in Native IDE mode - no AHCI available) and beside this very anoying problem under OS X, it works fine. Any ideas ?

Finally fix it ! (sort of…) It's the Nvidia chip that's malfunctionning. I used boot flag nv_disable=1 -f -v and Tadaaaaaa ! I'm now installing mavericks with myHack 3.3.1. With Windows 8.1, the graphic card driver was already unable to properly install and I should have suspected it from the beginning ! So My D830 is finally useless as I don't have a working LCD Screen, a working charging battery and las but not least, no 3D acceleration. What a Laptop ! Let's go to eBay to find a fully working D830

Well, wifi is disabled and totally remove from the laptop but that's still the same… Pandora's installed but fails after some post-installation kexts that used to work from my precedent try, but QE/CI wasn't enabled too.

It's disabled… I'll try to remove it completely and we'll see… BTW, I've tried with ML and its related bootpack and it still the same.

As I said, the LCD screen of the D830 is dead so I've totally removed it and it's just plug via VGA outpout to an External LCD Screen. I think that's the reason why it doesn't recognize the resolution. I'll try to plug it to another LCD (or CRT) screen because the one I'm actually using is in fact a TV screen with VGA input built-in. But it doesn't explain why myHack fails where Pandora works (beside the fact that it doesn't provide QE/CI )

Indeed, it's not GeForce but still it's Nvidia

Yeah I'm sure, Nvidia GeForce Quadro NVS 135 M with 128 Mb share memory.

I've made another test on another setup and it DOES boot with boot flag GraphicsEnabler=No but not with the D830. Very strange, I'm going to redownload the bootpack and give another try but I'm pretty sure that the one I'm using isn't corrupted… the problem with Pendora's solution is that I'm not getting QE/CI support at all.