Search the Community

HI, I have a HP 450 Notebook PC and I was looking for some info to install OS X, but searching in forum I didn't found info. Compatibility guide shows HP 430 only. My PC: System Manufacturer: Hewlett-Packard System Model: HP 450 Notebook PC (64 bits) BIOS: InsydeH2O Version 03.72.05F.05 Processor: Intel® Core i3-2328M CPU @ 2.20GHz (4 CPUs), ~2.2GHz Memory: 6144MB RAM Card name: Intel® HD Graphics 3000 Chip type: Intel® HD Graphics Family Audio Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (Spanish) Keyboard PS/2 estándar Synaptics PS/2 Port Compatible TouchPad Matching Device ID: *syn0002 System Device: Name: Intel® 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D Intel® 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26 2nd Generation Intel® Core Processor Family DRAM Controller - 0104 Synaptics SMBus Driver Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter Controladora de High Definition Audio Realtek PCIe GBE Family Controller Intel® 7 Series/C216 Chipset Family PCI Express Root Port 4 - 1E16 Intel® 7 Series/C216 Chipset Family PCI Express Root Port 3 - 1E14 Intel® HM75 Express Chipset LPC Controller - 1E5D Intel® 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10 Intel® Management Engine Interface Intel® 7 Series Chipset Family SATA AHCI Controller I would greatly appreciate any help to know if its possible to install OS X in my pc.

Good night guys. I have a problem in Yosemite 10.10.2 in my HDMI output, when I connect the Win 8.1 or the Mavericks who had before that instação displayed HDMI on TV now only displays as DVI, HDMI before the audio did not work because I was using VoodooHDA more now that I could configure my AppleHDA for Conexant 20672 SmartAudio HD'm having this problem with HDMI and can not even test if my external audio is working: Detail that before did not apply at Clover Patch for my HDMI work, just installed the AppleIntelFramebufferCapri that comes in the latest Vietnam Tool and it worked using the Mavericks already in need Yosemite apply this patch and the screen is half buggy when you start your Mac with connected HDMI cable: Patch HDMI-DP port HD4000 1600x900 Name: AppleIntelFramebufferCapri Find: 040066010103010100000002 Replace: 040066010102040200000004 Find: 300200000000000001000000400000000000000001000000400000000000000001000000400000000000000000000000 Replace: 300200000205000000040000070400000304000000040000810000000406000000080000060000000000000000020011 It works just like DVI. Already tested several HDMI cables and give the same problem, you may change this Patch solve most do not know what to change it. MY SETTINGS: Dell Inspiron 15r SE 7520 CPU: i7 3632QM 2.2 / 3.2 RAM: 8GB DDR3 1600mhz GPU: HD 4000 2GB (1920x1080 internal LCD) / AMD Radeon 7730m 2GB (I can not turn, but it does not know if you can use it as a discrete GPU al I disabled via DSDT) Sorry my english. Thanks.

Has anyone ever encountered or fixed an issue on some Dell notebook (internal) keyboard which cause the super (windows/command) key to not function properly? I have experienced this on a handful of devices now and it's more than slightly frustrating. When I alter a key-press with command it just inserts foreign characters (ie Command-Q is œ, or Command-W is ∑ ). I have tried the PS/2 keyboard fix int he hopes that this would perhaps have some impact, but it does not. I also tried re-mapping the keys, swapping Command and Control. The effect was the same, but with the control key. I have experienced this issue with both the regular Dell notebook keyboard and the expanded full notebook keyboard (with 10-key pad). This issue does not happen with external USB keyboards. Touchpad and Joystick seem to work as expected.

Hi, my name's Ken. This is my first post and I do have Mavericks working on my Samsung laptop but I'm having issues with my graphics. Here are my specs: Samsung Series 7 Chronos NP700Z5A-S01 Notebook PU Intel Core i7 2670QM @ 2.20GHz Sandy Bridge 32nm Technology RAM 8.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-24) Motherboard Samsung Electronics Co., Ltd. 700Z3A/700Z4A/700Z5A/700Z5B (CPU) Graphics Generic PnP Monitor (1600x900@60Hz) Intel Mobile Intel HD Graphics (Samsung) 1024MB ATI AMD Radeon 6750M (Samsung) Storage 750GB Hitachi HTS727575A9E364 (SATA) 7GB SanDisk iSSD P4 8GB (SSD) Optical Drives MATSHITA DVD-RAM UJ8A7AS Audio Intel Display Audio Realtek High Definition Audio The problem is the graphics are set at one resolution, 1024X768, but my notebooks native resolution is 1600X900. Right now it's using the stretch to screen option and although it doesn't look bad, it doesn't look all that good either. Ideally I'd like to use my Radeon 6750M card for the graphics but when I look at the system information it's using the Intel graphics card but it's rated at 64 megs of memory and this explains why I'm getting flickering effects on websites when I scroll up or down. I've tried using a kext but that did nothing and I've also used a smbios setting that matched the specs of this computer and while it did change things in the "About This Mac" settings it didn't change the resolution. I've also been reading on other forums about "direct injecting" for the graphics card and also about using ROMs but that seems kind of intimidating to me and there's also a chance I may mess things up as it involves hex numbers. I also briefly tried getting the Intel Mobile graphics to work with a kext but it messed up the screen, turned it grey and everything on screen was enlarged slightly and shifted to the right. Needless to say, after that I had to re-install Mavericks. I've got everything else working fine but the icing on the cake would be to get the proper resolution working for this notebook. Thanks in advance.

Hello guys, I have a Toshiba NB500-100 and I couldn't manage to install ANY of the OS X Versions I tried with different USB-Sticks, and had problems since the beginning, - Snow Leopard did not boot, no chance to type anything into the BIOS. - On Mountain Lion and Mavericks: If I don't press any key, the Apple logo shows and stays like that. If I press a key and use either "-v" or "-x", a large log gets displayed too fast for me to keep up, and suddenly the screen turns black. Nothing more happens. Any help please? Thanks in advance.